Refine by
Applications
- Industrial Air Pollution Control for the Automotive and Vehicle Engineering
- Industrial Air Pollution Control for the Chemical and Petrochemical Industry
- Industrial Air Pollution Control for the Building Materials, Cement and Lime
- Industrial Air Pollution Control for the Consumer Goods Industry
- Industrial Air Pollution Control for the Electronics and Electrical Industry
- Industrial Air Pollution Control for the Energy and Resources
- Industrial Air Pollution Control for the Food Industry
- Industrial Air Pollution Control for the Pharmaceutical Industry
- Industrial Air Pollution Control for the Metals and Mining
- Industrial Air Pollution Control for the Oil and Gas
- Industrial Air Pollution Control for the Recycling and Waste Management
- Industrial Air Pollution Control for the Coating and Printing industry
- Industrial Air Pollution Control for the Forest Products
- Decanter Centrifuges for Sludge Dewatering Applications
- Decanter Centrifuges for Wastewater Treatment Applications
- Decanter Centrifuges for Food and Beverage Processing Applications
- Decanter Centrifuges for Brewery and Winery Applications
- Decanter Centrifuges for Renewable Energies Applications
- Environmental solutions for the printing and packaging industry
- Wastewater Treatment Solutions for Oil & Gas
- Wastewater Treatment Solutions for Mining
- Wastewater Treatment Solutions for Industrial
- Water Treatment Systems for Chemical Processing
- Industrial Airborne Emissions Technology for Food Processing
- Industrial Airborne Emissions Technology for Pet Food Residue Processingd
- Industrial Airborne Emissions Technology for Biogas and Waste Processing
- Gas treatment solutions for natural biogas to energy industry
- Environmental solutions for the iron and steel industry
- Environmental solutions for the refining and petrochemical industry
- Environmental solutions for the waste incineration industry
- Air pollution control catalyst solutions for chemical process catalysts sector
- Air pollution control catalyst solutions for industrial air pollution control sector
Regenerative System Equipment & Supplies
182 equipment items found
Manufactured by:Centriair AB based inSävedalen, SWEDEN
DEO is a regenerative catalyst system for elimination of VOC and odour emissions from industrial ...
Manufactured by:Prantner GmbH Process Engineering based inReutlingen, GERMANY
First of all, the contaminated air is drawn in through the process fan and heated with the aid of an electric heater or gas burner to the required reaction temperature. Subsequently, the pollutants are converted into carbon dioxide and water in the combined reactor and heat storage bed. The emitted heat from the reactor is passed over a second bed and is stored there. After the storage bed is ...
Manufactured by:Konica Minolta Healthcare Americas, Inc. based inWayne, NEW JERSEY (USA)
MSK Ultrasound and Orthobiologics. Leading Technology. Empowering clinical difference. A Partnership Built on Personalized Healthcare. Konica Minolta and RegenLab® USA are innovating the future of MSK and regenerative medicine, together, with a focus on patient ...
Manufactured by:Safety-Vac based inGainesville, FLORIDA (USA)
Power System: Subaru Robin Model EX17 6 hp air-cooled engine. No-spill oil drain for ease of maintenance. Full spark arrest. FPZ K5 or Siemans 15 High pressure regenerative blower system. Vacuum 8.5 in. HG, up to 200 CFM (see Service Rating for ...
Manufactured by:Safety-Vac based inGainesville, FLORIDA (USA)
Power System: Subaru Robin Industrial 9 hp air-cooled engine. No spill oil drain. Full spark arrest. High torque industrial centrifugal clutch. V belt drive. High pressure regenerative blower system. Vacuum 10 HG, up to to 225 CFM (see Service Rating for performance ...
Manufactured by:Safety-Vac based inGainesville, FLORIDA (USA)
Power System: Subaru Robin Industrial 9 hp air-cooled engine. No-spill oil drain. Full spark arrest. High torque industrial centrifugal clutch. V belt drive. High pressure regenerative blower system. Vacuum 10 HG, up to 225 CFM (see Service Rating for performance ...
Manufactured by:Sang Won Machinery Co., Ltd. based inIncheon, SOUTH KOREA
On 2002, we successfully performed R&D of Advanced RTO System with the support of Korea MOE. On 2004, its advanced technology was appointed as the New Environmental Technology ET Mark by Minister of Korea Ministry of Environment. On March 2006, we and our partner, SWC Japan Co., Ltd. successfully supplied & installed Advanced RTO System with VOC Concentrator for Gravure Printing Dry Line ...
Manufactured by:Catator AB based inLund, SWEDEN
The MeshRegenOx system is a regenerative catalytic oxidizer unit. The possibility to oxidize organic compounds at low temperatures is combined with the high thermal efficiency of a regenerative heat exchange system. The result is a compact and efficient abatement system with low operation ...
Manufactured by:Abound Energy Inc based inVancouver, BRITISH COLUMBIA (CANADA)
Lowest cost of storage in the market for long-duration applications. Resolves intermittent and unpredictale nature of renewable energy sources while completely decoupling the linkage between power and ...
Manufactured by:Branch Environmental Corporations based inSomerville, NEW JERSEY (USA)
In a Regenerative Oxidizer, an effort is made to get the absolutely highest possible energy recovery. This type of design is aimed at low concentrations of organics. Since you can recover a very high percentage of the energy, you can operate with low fuel use. This has to be balanced against any cases where you might actually encounter much higher levels of inlet VOC which could overheat the ...
Manufactured by:Infinity Fuel Cell and Hydrogen, Inc based inWindsor, CONNECTICUT (USA)
Infinity’s XSTORRA® Regenerative Fuel Cell System combines power generation and energy storage for remote locations. This system consists of one module housing a hydraulically actuated fold-out solar array and a second module containing a hydrogen generator, fuel cell, and hydrogen ...
Manufactured by:CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based inGraz, AUSTRIA
The perfect CTP-solution for a combined cleaning of organic pollutants (RTO) and nitrogen oxides (SCR) at high efficiencies. The RTO-i-SCR is suitable for flow rates up to 300.000 Nm³/h at raw gas temperatures up to ...
Manufactured by:CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based inGraz, AUSTRIA
The VOXcube purifies organic (VOC) and specific inorganic pollutants in the waste gas. The system is suitable for flow rates up to 125.000 Nm³/h, with a wide variety of concentrations and contaminants. For waste gas temperatures from -20°C up to ...
Manufactured by:CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based inGraz, AUSTRIA
The perfect CTP solution as an air pollution control treatment for increased solid matter content (dust), sticky substances or corrosive components in the waste gas. The AutoTherm is suitable for flow rates of up to 300,000 Nm³/h, independent of the concentration and the nature of the contaminants. For waste gas temperatures from -20°C up to ...
Manufactured by:Dürr Systems, Inc. based inDe Pere, WISCONSIN (USA)
RCO (regenerative catalytic oxidizer) systems combine the advantages of regenerative heat exchangers with those of catalytic oxidation. They are used to reduce pollutant levels in exhaust air that is not heavily contaminated and to minimize ...
Manufactured by:AirProtekt Limited based inNewton, UNITED KINGDOM
A wide range of industrial processes generates Volatile Organic Compounds (VOCs) as a consequence of using organic compounds as solvents or reactive chemicals. In addition to causing localised odour problems VOCs are implicated in a wide range of environmentally damaging processes, including the generation of low-level ozone and smog. For this reason legislation has been introduced in many ...
Manufactured by:CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based inGraz, AUSTRIA
The perfect CTP-solution for combined cleaning of low laden organic waste gas flows and high caloric off gas and/or liquids even without LEL protection. The Hybrid-RTO is especially suitable for small flows at concentrations > LEL, which occur continuously or discontinuously. Design of the raw gas injection is possible in ...
Manufactured by:Ever-Power Pte. Ltd. based inSingapore, SINGAPORE
One of the most widely accepted air pollution control technologies across the industry today is the regenerative thermal oxidizer system, commonly known as RTO. RTO uses a ceramic bed heated from the previous oxidation cycle to preheat the input gases to partially oxidize them. The preheated gas enters the combustion chamber, which is heated by an external fuel ...
Manufactured by:Eisenmann Environmental Technology GmbH - Deurotech Group based inBöblingen, GERMANY
Since it uses very little additional energy, regenerative thermal oxidation (RTO) is a highly efficient exhaust air clearing system. In the Eisenmann solution, the complex valve system is replaced by a special air diffuser system with rotating distributor with a high rate of availability and low maintenance. ...
Manufactured by:CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based inGraz, AUSTRIA
The AutoKAT combines the advantages of regenerative thermal oxidation with those of catalytic oxidation. The AutoKAT is a very cost-effective alternative for well understood waste streams. Existing RTO systems can be upgraded to an ...