Refine by
Respirable Dust Sampling Equipment & Supplies
15 equipment items found
Manufactured by:Zefon International - Antylia Scientific based inOcala, FLORIDA (USA)
The Zefon Respirable Dust Aluminum Cyclone is used in conjunction with 37mm 3 piece open face filter cassettes to separate dust particles by size with the respirable particles being collected on the filter and larger particles being removed. The collection efficiency curve meets the standards set forth by ACGIH/ISO/CEN for a respirable curve with a median 50% cut point of 4µ at 2.5 LPM ...
Manufactured by:Zefon International - Antylia Scientific based inOcala, FLORIDA (USA)
The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100 micron and ...
Manufactured by:Envirotech Instruments Pvt. Ltd. (EIPL) based inNew Delhi, INDIA
The Respirable Dust Sampler is essentially a particulate sampling system requiring a high flow-rate. Gaseous sampling requires only a few LPM of air flow. All models of Envirotech Respirable Dust Samplers are provided with a suction port and mounting hardware to facilitate interface of the ...
Manufactured by:Envirotech Instruments Pvt. Ltd. (EIPL) based inNew Delhi, INDIA
Envirotech introduced the APM 451 Respirable Dust Sampler based on CSIR NEERI knowhow. The system was upgraded to APM 460 in 1997. The APM 460 sampler uses an improved cyclone with sharper cutoff (D50 at 10 microns) to separate the coarser particulates from the air stream before filtering it on the glass microfibre filter. By using the APM 460, measurement of Respirable Particulate Matter can be ...
Manufactured by:Soniya Scientific Equipment Solutions Pvt. Ltd. based inLucknow,, INDIA
SSES-APD-001 suck ambient air using low maintenance brushless and noiseless blower through corrosion free aluminum modular pipe and pass thorough a sharp cutoff cyclone which divides the particulate matters in two fractions: one below 10 microns (10µ). The Respirable dust (below 10 microns) directly get deposited on the glass micro fibre filter paper and the coarser particle (above 10 ...
Manufactured by:Yash Engineers based invadodara, INDIA
The instrument is used for the measurement of Suspended particulate matters having size less than 10 microns. Respirable Dust Sampler is supplied with seperate Cyclone Assembly alongwith Yash High Volume Sampler(H.V.S) Unit. PM10 is defined as particulate matter (PM) with a mass median aerodynamic diameter less than 10 micrometers (um) - PM10. In other words, ...
Manufactured by:Soniya Scientific Equipment Solutions Pvt. Ltd. based inLucknow,, INDIA
The Respirable Dust Sampler is essentially a particulate sampling system requiring a high flow-rate. Gaseous sampling (for NO2, SO2, CL2, NH3, O3, H2S, etc) requires only a few LPM of air flow. Soniya Scientific Equipment Solution Respirable Dust Samplers SSES-APD-001 and PM10/2.5 Sampler ...
Manufactured by:Amaze Instruments based inAligarh, INDIA
Particles In The Air Are Sampled At Constant Rate Of 0.9 To 1.3 M3 /Min Through The Inlet Of Cyclone. By Virtue Of Their Momentum, Particles Greater Than 10 Microns Are Carried Vertically Upwards By The Air Flow And Collected On A Filter Paper Of 8 X 10 Inch ...
Manufactured by:Zefon International - Antylia Scientific based inOcala, FLORIDA (USA)
The Zefon 10mm Conductive Nylon Cyclone (Dorr-Oliver style) is used in conjunction with 37mm filter cassettes to separate dust particles by size with the respirable particles being collected on the filter and larger particles being removed. The collection efficiency curve meets the standards set forth by ACGIH/ISO/CEN for a respirable curve with a median 50% cut point of 4µ when operated at a ...
Manufactured by:Zefon International - Antylia Scientific based inOcala, FLORIDA (USA)
Zefon’s 10mm Nylon Cyclone is designed to separate respirable dust particles from non-respirable particles and allow the respirable particles to be collected on a filter cassette. Model 456243 is designed to fit Zefon mining cassettes and is specified for use in coal mine dust sampling per 30 ...
Manufactured by:Vaibhav Equipment Service based inAhmedabad, INDIA
Special features: modular design for easy operation, drain plug for manometer fluid leveling, sturdy aluminum construction with ss hardware, low noise during operations, less variation in flow even chocking of filter, maintenance free suction assembly, totally eliminated of emi, compact, portable, easy to operate-transport & handle, arrangement for parallel gaseous sampling, light provision ...
Manufactured by:VayomTech based inJaitpur, INDIA
VYOMTECH Respirable Dust Sampler VTM-560BL is latest Dust sampler for monitoring of Respirable Dust (PM10) using the sharp cut-off cyclone and collected on the glass Microfibre filter paper. It can also be used for simultaneously monitoring of gaseous pollutants like SO2, NOx etc. using the Gaseous attachment. Total suspended Particulate matter can also be analyzed using the Dust collected in ...
Manufactured by:GSA Messgerätebau GmbH based inRatingen, GERMANY
The air sampler SG10-2A incl. charger, personal air sampling system for the determination of hazardous substances in the air at work places (total dust and fine dust), flow rate 3.5-10 l/min. It has been developed for the sampling of gaseous and particulate matter, particularly for the sampling with 10 l/min, the nominal flow range is from 3.5 to 10 l/min, lower flow rates down to approx. 2 l/min ...
Manufactured by:Drop Enviro Engineers & Services based inSurat, INDIA
DROP Enviro Engineers & Service made Respirable dust sampler ,PMI-410 NL sampler uses an improved cyclone (with sharper cutoff) to separate the coarser particles (>10 microns) from the air stream before filtering it on the 0.5 micron pore size filter allowing measurement of both TSP and Respirable fraction of suspended Particulate Matter (SPM). our customers demand that high noise level is ...
Manufactured by:Vaibhav Equipment Service based inAhmedabad, INDIA
Special features: confirm to bis 5182 (part 23) : 2006 standard, sampling flow rate will maintain automatic at pre set level even during filter chocking, ampere & voltage variation with electronic feedback controller, digital manometer with volume totalizing (waterless manometer, no need of filling and adjusting zero lever with distilled water), digital manometer eliminated glass manometer ...