Refine by
Applications
- Incineration Industry Emissions Monitoring & Analysis
- In-Line Systems for Testing and Automation Technology
- Solutions for Electronics Industry
- Air Quality Monitoring Equipment for Sample Handling Industry
- Gas monitoring and dust monitoring for the powerplants industry
- Gas monitoring and dust monitoring for the cement industry
- Gas monitoring and dust monitoring for the iron / steel industry
- Gas monitoring and dust monitoring for chemical industry
- Gas monitoring and dust monitoring for fertilizer industry
- Gas monitoring and dust monitoring for pulp and paper industry
- Gas monitoring and dust monitoring for the aluminium industry
- Stack gas emission monitoring for the energy industry
- Gas monitoring and dust monitoring for the enviromental industry
- Gas monitoring and dust monitoring for the nickel industry
- Gas monitoring and dust monitoring for the LNG industry
- Gas monitoring and dust monitoring for the natural gas industry
- Gas monitoring and dust monitoring for the refinery industry
- Gas monitoring and dust monitoring for the nuclearpower industry
- Gas monitoring and dust monitoring for the clean gases
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Air quality and industrial gas monitoring systems for CEMS - Stack air monitoring
Stack Testing Equipment & Supplies
116 equipment items found
Manufactured by:Kewell Technology Co.,Ltd. based inHefei City, CHINA
Fuel Cell Stack Test System (FCTS-S) is engineered to provide a stable test platform for fuel cell stack. Ideal for stack performance evaluation and the R&D process of fuel cell ...
Manufactured by:Hephas Energy Corporation based inHsinchu, TAIWAN
HephaStation series are complete development and testing programs for short / long fuel stacks (5 ~ 300kW). HS station has accurate temperature, humidity, automatic pressure control and grid-connected electronic load. The equipment can monitor the partial voltage of the stack above 600chs, and observe the temperature and pressure on the ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
It is being manufactured since 1974 and is thevery first heated THC analyzer ever built using a permanent back purge sample filter. It is still the mostly liked heated FID throughout the stack testing community and best known for its legendary ruggedness, forgiveness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
Also among other portable gas FIDs, the 3-200 It is the first ever built transportable fully heated FID using high pressure back purge sample filter. It is widely distributed throughout the industry and the stack testing community and is much liked for its ruggedness, high accuracy, sensitivity and ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation. The pump drive mechanism and motor have been designed for continuous, smooth and low ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The 3-300A was a also “first” in the industry due to its sample filter back purge feature. It is also a very much liked 19″ rack mount heated FID throughout the stack testing community and well known for its ruggedness, forgiveness and long standing accuracy and sensitivity. The 3-300A is fully identical to the VE7 and 3-200 and has been ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
Gas analyzers for emissions measurement are typically exposed to heavy soot dust and condensed hydrocarbon contamination. Therefore it is absolutely necessary to fine filter the sample gas stream and prevent HC memory effects in the entire sample train. The J.U.M. Engineering PreFilter® 112 is an efficient, all heated and low pressure drop interface and sample filter for removing solids from ...
Manufactured by:Alpine FIBC Pvt. Ltd. based inAhmedabad, INDIA
These are special types of bags used for transportation of dangerous materials. The UN bags are designed and tested in accordance with the recommendation as laid down in the "United Nations Recommendations on the Transportation of Dangerous Goods (Orange Book)". To maintain international regulations for transport by sea, rail and road, Alpine FIBC designs and produces quality UN ...
Manufactured by:Cherne Industries based inShakopee, MINNESOTA (USA)
Cherne® Clean-Seal® plugs eliminate test water backsplash when stack testing drain, waste and vent plumbing systems. Simply thread them into a standard test tee, inflate the bladder and run your test. Cherne Industries is a global leader in pipe plug and testing. ...
Manufactured by:Neptech Inc. based inHighland, MICHIGAN (USA)
Flexotherm™ manufactures heated sample lines specifically for use in gaseous emissions sampling. The two primary sampling industries would be engine and stack testing. Our products meet or exceed all EPA guidelines for emissions sampling. We provide precise and even heating on all our products. Flexotherm™ is also well known for its rugged design and ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring. The Model T100H provides a simple but precise solution for a broad range of CEM and stack testing ...
Distributed by:Robert Bosch Manufacturing Solutions GmbH based inStuttgart, GERMANY
Regarding stationary fuel cells we are your industrialization partner for SOFC (Solid Oxid Fuel Cell) systems. We offer testing solutions for development and production of SOFC cell stacks. Our full stack and short stack test benches are designed for function tests and validation of the short ...
Manufactured by:FlowKinetics LLC based inCollege Station, TEXAS (USA)
The FKS 1DP-PBM meter has unmatched ease of use due to its prompt driven user interface and intuitive operation. It is the perfect companion for general pressure measurement, airflow tests, testing and balancing, speed traverses, HVAC, process control, stack testing, R & D, pressure measurements across fans, filters, ...
Manufactured by:Koki Holdings Co., Ltd based inMinato-ku, JAPAN
Drilling time: Approx. 4.0 seconds. Test Conditions Stack of two 2” thick SPF lumber, Self-Feed Bit:2-9/16” (?65mm), when use in high speed ...
Manufactured by:SHINHOP, Brand of Shenzhen Xinhua Peng Laser Equipment Co, Ltd. based inShenzhen, CHINA
The equipment is mainly used for the automatic hot and cold pressing of battery cells after winding or stacking, short circuit testing, cell stacking and packaging, automatic cutting of pole ears, encapsulation, automatic insulation sheet addition, automatic welding of poles, automatic bending and sealing of covers, automatic laser welding, ...
by:National Instruments based inAustin, TEXAS (USA)
The wide measurement range is well suited for high-voltage measurement applications such as power metering, power quality monitoring, motor test, battery stack testing, and fuel cell tests. You can perform transient and harmonic analysis with high-speed simultaneous sampling. In addition, you can prevent ground loops and add ...
Manufactured by:FlowKinetics LLC based inCollege Station, TEXAS (USA)
TheFKS 1DP-PBM-Eis a digital manometer and air speed meter that sets new standards for ease of use due to its prompt driven user interface and intuitive operation. It is ideally suited for general pressure measurement, airflow monitoring, testing and balancing, speed traverses, HVAC, process control, stack testing, R & D, pressure ...
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
For the commissioning and testing of cell voltage measurement electronics and FuelCell control units, and in particular for the software testing of such ECUs, it is necessary to simulate cell-specific voltage values. The simulation modules of the MCM IntelliSim series, in conjunction with a master module enable active simulation of a fuel cell ...
Manufactured by:Sylab Pvt. Ltd. based inHyderabad, INDIA
Sylab's Vibratory Sieve Shaker is a sophisticated laboratory instrument designed for precise particle size analysis using a series of standard test sieves. This advanced sieve shaker facilitates accurate separation and sizing of particles, essential for quality control and research applications. The instrument works by generating controlled, three-dimensional vibrations that ...
Manufactured by:Thermo Scientific - Air Quality Instruments based inFranklin, MASSACHUSETTS (USA)
The Thermo Scientific™ Model 42i-HL is a chemiluminescent gas analyzer which measures nitrogen oxides (NO-NO2-NOx) in the emissions from a source. The Model 42i-HL is the industry standard for high level NOx Continuous Emissions Monitoring (CEM) systems and stack testing services. Using chemiluminescence technology, the Model 42i-HL measures the amount of ...