Refine by
Applications
- Gas monitoring and dust monitoring for the powerplants industry
- Gas monitoring and dust monitoring for the cement industry
- Gas monitoring and dust monitoring for the iron / steel industry
- Gas monitoring and dust monitoring for chemical industry
- Gas monitoring and dust monitoring for fertilizer industry
- Gas monitoring and dust monitoring for pulp and paper industry
- Gas monitoring and dust monitoring for the aluminium industry
- Gas monitoring and dust monitoring for the enviromental industry
- Gas monitoring and dust monitoring for the nickel industry
- Gas monitoring and dust monitoring for the LNG industry
- Gas monitoring and dust monitoring for the natural gas industry
- Gas monitoring and dust monitoring for the refinery industry
- Gas monitoring and dust monitoring for the nuclearpower industry
- Gas monitoring and dust monitoring for the clean gases
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Air quality and industrial gas monitoring systems for CEMS - Stack air monitoring
Stack Testing Equipment Supplied In Canada
19 equipment items found
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring. The Model T100H provides a simple but precise solution for a broad range of CEM and stack testing ...
Manufactured by:W.S. Tyler based inMentor, OHIO (USA)
W.S. TYLER developed the Ro-Tap Test Sieve Shakers in the early 1900s. Until that time, sieving was primarily performed by hand. The design intent was to replicate and mechanize the hand motions. Today, the Ro-Tap Test Sieve Shaker, with its rotating movement and tapping energy, provides for the most consistent, repeatable sieving analysis results. The Ro-Tap is ...
Manufactured by:AgraTronix based inStreetsboro, OHIO (USA)
After the baling process, hay is stacked and awaits sale. Testing at this stage is vital for the same reasons that stood prior to the baling process. With a hand-held electronic probe tester, such as the AgraTronix HT-PRO or DHT-1, you are able to simply insert the probe into the bale and determine its moisture level. ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The controller unit contains PID control for accurate set-point of heated sampling equipment, such as at 180°C for incineration monitoring applications. The design of the controller has taken into account the requirements of stack emissions testing, and so the controller allows for independent heating of the heated sample probe from within the same ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
GHFM-01 Guarded Heat Flow Meter is designed to test the thermal resistance and thermal conductivity of both homogeneous and heterogeneous materials. The Guarded Heat Flow Meter (GHFM-01) follows ASTM E1530-19 for testing thermal resistance and thermal conductivity of solids, such as metals, polymers, composites and paste from -20 °C to 310 °C. The ...
Manufactured by:Gilson Company, Inc. based inLewis Center, OHIO (USA)
Gilson Tapping Sieve Shakers have a researched-based sieving action that produces sharp, repeatable separations quickly over a broad range of particle sizes and material types. The Gilson-engineered sieving action results from perfect circular rotation of the sieve stack plus vertical two-way tapping at 48 taps per minute. These high-capacity shakers can hold as many as twenty sieves, depending ...
Manufactured by:Gilson Company, Inc. based inLewis Center, OHIO (USA)
Gilson's Orbital Sieve Shakers are portable, easy to use, and outperform comparably priced sieving equipment. They are used in particle size testing of mineral aggregates and for sieve gradations of many other free-flowing granular materials. These cost-effective 1/4hp units are widely accepted by state transportation departments for highway materials ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Sample Interface Panel is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Interface Panel will meet the requirements for sampling during model development and PEMS QA activity. The Sample Interface Panel ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Probe is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Probe will meet the requirements for sampling during model development and PEMS QA activity. The Probe is required to connect the sample line and the ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Sample Line is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Line will meet the requirements for sampling during model development and PEMS QA activity. The Sample Line is required to connect the Probe ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The ST5 is the next generation isokinetic sampler, developed to be efficient, rugged, accurate and user friendly. The perfect companion for stack testers. The ST5 includes all the measuring sensors inside its robust structure making it a single practical device to be taken on the stack and reducing the need of maintenance. Precise isokinetic condition, sampling flowrate is directly controlled ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The ST5 is the next generation isokinetic sampler, developed to be efficient, rugged, accurate and user friendly. The perfect companion for stack testers. The ST5 includes all the measuring sensors inside its robust structure making it a single practical device to be taken on the stack and reducing the need of maintenance. Meets and exceeds the requirements defined in the sampling methods such as ...
Manufactured by:Scentroid based inStouffville, ONTARIO (CANADA)
The Scentroid Vacuum Chamber is easy to use, portable, and serves as a cost-effective air sampling collection device. Vacuum chambers are air sampling vacuum pump used to pull samples directly without dilution from stack, ambient air, or other sampling devices such as flux chambers or wind ...
Manufactured by:Geomative Co., Ltd. based inNanshan, CHINA
GD-20 is a brand new multichannel geo-electrical system, designed with 5 or 12 channels and up to maximum 10 survey points can be measured concurrently for ERT survey, highly enhancing field survey efficiency. GD-20 can be used in SP, ERT and IP surveys. Comparing to single channel instruments, GD-20 boosts ERT survey efficiency up to 2-3 times in average and lowering working duration of field ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Mobile CEMS is a complete mobile monitoring system on wheels and an integral part of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Mobile CEMS will meet the requirements for use in reference method ...
Manufactured by:Geomative Co., Ltd. based inNanshan, CHINA
GD-10 is developed based on the latest digital and analog circuitry technique, making it the world leading multi-functional direct current (DC) method instrument. This equipment can be adopted in self-potential (SP), apparent resistivity and induced polarization (IP) surveys. Not only GD-10 supports regular ERT survey configurations, subsurface profiling using both 2D and 3D survey arrays are ...
Manufactured by:Teledyne Monitor Labs, Inc. based inEnglewood, COLORADO (USA)
The Teledyne ML675 dilution-extractive system can be used in 40CFR75, 40CFR60, 40CFR63, and process control applications. In this system, sample is prepared for analysis by diluting stack gas with clean, dry instrument air at the probe location. Since no moisture is removed with dilution, measurements for SO2, NOx, CO, THC and CO2 are made on a wet ...
Manufactured by:California Analytical Instruments, Inc. (CAI) based inOrange, CALIFORNIA (USA)
The ZPA analyzer uses NDIR technology to measure CO, C02, CH4, S02, NO and paramagnetic or fuel cell for oxygen. The ZPA NDIR technology is based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, this analyzer produces highly stable and reliable results. A single infrared light beam is modulated by a chopper system and passed through ...
Manufactured by:NEO Monitors - a Nederman company based inSkedsmokorset, NORWAY
LaserGas™ II Multi Pass combines extractive measurement with a compact analyzer design. The laser beam is coupled into a measurement cell, where it is reflected multiple times between two spherical mirrors in order to enhance the analyzer sensitivity. The monitor is a turn-key instrument. No other operations than connecting power, sample gas tubes and optional purge are required during ...