- Home
- Equipment
- north america
- stack testing
Refine by
Applications
- Air Quality Monitoring Equipment for Sample Handling Industry
- Gas monitoring and dust monitoring for the powerplants industry
- Gas monitoring and dust monitoring for the cement industry
- Gas monitoring and dust monitoring for the iron / steel industry
- Gas monitoring and dust monitoring for chemical industry
- Gas monitoring and dust monitoring for fertilizer industry
- Gas monitoring and dust monitoring for pulp and paper industry
- Gas monitoring and dust monitoring for the aluminium industry
- Stack gas emission monitoring for the energy industry
- Gas monitoring and dust monitoring for the enviromental industry
- Gas monitoring and dust monitoring for the nickel industry
- Gas monitoring and dust monitoring for the LNG industry
- Gas monitoring and dust monitoring for the natural gas industry
- Gas monitoring and dust monitoring for the refinery industry
- Gas monitoring and dust monitoring for the nuclearpower industry
- Gas monitoring and dust monitoring for the clean gases
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Air quality and industrial gas monitoring systems for CEMS - Stack air monitoring
Stack Testing Equipment Supplied In North America
85 equipment items found
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The 3-300A was a also “first” in the industry due to its sample filter back purge feature. It is also a very much liked 19″ rack mount heated FID throughout the stack testing community and well known for its ruggedness, forgiveness and long standing accuracy and sensitivity. The 3-300A is fully identical to the VE7 and 3-200 and has been ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation. The pump drive mechanism and motor have been designed for continuous, smooth and low ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
Also among other portable gas FIDs, the 3-200 It is the first ever built transportable fully heated FID using high pressure back purge sample filter. It is widely distributed throughout the industry and the stack testing community and is much liked for its ruggedness, high accuracy, sensitivity and ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
It is being manufactured since 1974 and is thevery first heated THC analyzer ever built using a permanent back purge sample filter. It is still the mostly liked heated FID throughout the stack testing community and best known for its legendary ruggedness, forgiveness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
Gas analyzers for emissions measurement are typically exposed to heavy soot dust and condensed hydrocarbon contamination. Therefore it is absolutely necessary to fine filter the sample gas stream and prevent HC memory effects in the entire sample train. The J.U.M. Engineering PreFilter® 112 is an efficient, all heated and low pressure drop interface and sample filter for removing solids from ...
Manufactured by:Cherne Industries based inShakopee, MINNESOTA (USA)
Cherne® Clean-Seal® plugs eliminate test water backsplash when stack testing drain, waste and vent plumbing systems. Simply thread them into a standard test tee, inflate the bladder and run your test. Cherne Industries is a global leader in pipe plug and testing. ...
Manufactured by:Neptech Inc. based inHighland, MICHIGAN (USA)
Flexotherm™ manufactures heated sample lines specifically for use in gaseous emissions sampling. The two primary sampling industries would be engine and stack testing. Our products meet or exceed all EPA guidelines for emissions sampling. We provide precise and even heating on all our products. Flexotherm™ is also well known for its rugged design and ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring. The Model T100H provides a simple but precise solution for a broad range of CEM and stack testing ...
Manufactured by:FlowKinetics LLC based inCollege Station, TEXAS (USA)
The FKS 1DP-PBM meter has unmatched ease of use due to its prompt driven user interface and intuitive operation. It is the perfect companion for general pressure measurement, airflow tests, testing and balancing, speed traverses, HVAC, process control, stack testing, R & D, pressure measurements across fans, filters, ...
Manufactured by:Koki Holdings Co., Ltd based inMinato-ku, JAPAN
Drilling time: Approx. 4.0 seconds. Test Conditions Stack of two 2” thick SPF lumber, Self-Feed Bit:2-9/16” (?65mm), when use in high speed ...
by:National Instruments based inAustin, TEXAS (USA)
The wide measurement range is well suited for high-voltage measurement applications such as power metering, power quality monitoring, motor test, battery stack testing, and fuel cell tests. You can perform transient and harmonic analysis with high-speed simultaneous sampling. In addition, you can prevent ground loops and add ...
Manufactured by:FlowKinetics LLC based inCollege Station, TEXAS (USA)
TheFKS 1DP-PBM-Eis a digital manometer and air speed meter that sets new standards for ease of use due to its prompt driven user interface and intuitive operation. It is ideally suited for general pressure measurement, airflow monitoring, testing and balancing, speed traverses, HVAC, process control, stack testing, R & D, pressure ...
Manufactured by:Thermo Scientific - Air Quality Instruments based inFranklin, MASSACHUSETTS (USA)
The Thermo Scientific™ Model 42i-HL is a chemiluminescent gas analyzer which measures nitrogen oxides (NO-NO2-NOx) in the emissions from a source. The Model 42i-HL is the industry standard for high level NOx Continuous Emissions Monitoring (CEM) systems and stack testing services. Using chemiluminescence technology, the Model 42i-HL measures the amount of ...
Manufactured by:W.S. Tyler based inMentor, OHIO (USA)
W.S. TYLER developed the Ro-Tap Test Sieve Shakers in the early 1900s. Until that time, sieving was primarily performed by hand. The design intent was to replicate and mechanize the hand motions. Today, the Ro-Tap Test Sieve Shaker, with its rotating movement and tapping energy, provides for the most consistent, repeatable sieving analysis results. The Ro-Tap is ...
Manufactured by:Universal Analyzers - AMETEK, Inc based inCarson City, NEVADA (USA)
The 500 series portable sample chiller is a staple to the mobile stack testing and laboratory setting. In order to analyze stack gas or exhaust from any combustion process, a method to remove moisture from the sample without removing gas components of interest is a must. The Universal Analyzers Thermoelectric Sample Cooler, which derives its ...
Manufactured by:AgraTronix based inStreetsboro, OHIO (USA)
After the baling process, hay is stacked and awaits sale. Testing at this stage is vital for the same reasons that stood prior to the baling process. With a hand-held electronic probe tester, such as the AgraTronix HT-PRO or DHT-1, you are able to simply insert the probe into the bale and determine its moisture level. ...
Manufactured by:SKYRE based inEast Hartford, CONNECTICUT (USA)
The SKYRE's baseline PEM Cell Electrolyzer Test System is highly versatile, offering a 100 kW test stand capable of accommodating both AEM and alkaline water testing. This turn-key testing solution is meticulously designed to advance your electrolysis development objectives and can be customized according to specific needs. ...
by:ESC Spectrum based inAustin, TEXAS (USA)
Mobile Testing Systems, operated by stack testers and process optimization teams, present design challenges which are better understood and addressed by a system integrator with employees actively engaged in testing activities. This unique insight allows for a streamlined design of both fully automated or manual systems best suited for the ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The controller unit contains PID control for accurate set-point of heated sampling equipment, such as at 180°C for incineration monitoring applications. The design of the controller has taken into account the requirements of stack emissions testing, and so the controller allows for independent heating of the heated sample probe from within the same ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
GHFM-01 Guarded Heat Flow Meter is designed to test the thermal resistance and thermal conductivity of both homogeneous and heterogeneous materials. The Guarded Heat Flow Meter (GHFM-01) follows ASTM E1530-19 for testing thermal resistance and thermal conductivity of solids, such as metals, polymers, composites and paste from -20 °C to 310 °C. The ...