Refine by
Applications
- Gas detection for building ventilation control
- Gas detection for the water industry
- Gas detection for the oil and gas industry
- Gas detection for the steel industry
- Gas detection & hazardous gas monitoring equipments for parking/service garages
- Microbial Biosensors for Watersheds
- Microbial Biosensors for WWTW
- Microbial Biosensors for Microorganism Detection
- Microbial Biosensors for Fish Farms
- Microbial Biosensors for Greenhouses & Agrifood
- Microbial Biosensors for Polluant Industries
Toxic Sensor Equipment & Supplies
117 equipment items found
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Model 700 Series Sensors are a non-intrusive "Smart" sensors designed to detect and monitor oxygen and Toxic Gases in air using electrochemical sensor ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Model DM-100 Series sensors feature intelligent electronics, non-intrusive operator interface and comprehensive fault diagnostics. The sensor is packaged in an electro-polished 316 stainless steel housing fitted with a ¾ inch NPT thread. The plug-in, field replaceable sensor cell features large surface area gold-plated pins that reduce the effects of corrosion in harsh industrial ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
Manufactured by:DD-Scientific based inFareham, UNITED KINGDOM
Introduction: The GS+4DT is the industry leading dual toxic sensor, ideal for multigas portable gas detectors. Key Features: high stability, fast response and recovery, very low H2S cross sensitivity on CO ...
Manufactured by:PID Analyzers, LLC based inSandwich, MASSACHUSETTS (USA)
The Model 30 is an analyzer for the measurement of toxic gases in the workplace. This analyzer is unusual since it is easy to calibrate, has a fast response and has only one step to send logged (optional) data to a PC. It uses electrochemical sensors for the measurement of ppb to ppm levels of selected toxics. ...
Manufactured by:RKI Instruments, Inc. based inUnion City, CALIFORNIA (USA)
It is capable of detecting standard confined space gases such as combustibles, O2, CO, and H2S, along with advanced options for PID, IR, and super toxic sensors. This multifunctional tool is fitted with a robust internal sample pump, alarms, an LED flashlight, and a large auto-rotating LCD display. Notably, it features a PID sensor equipped with ...
Manufactured by:Rel-Tek Corporation based inMonroeville, PENNSYLVANIA (USA)
ToxiBoss is a wall mounted gas sensor with interchangeable sensing heads to cover a wide variety of toxic gas situations. It is approved intrinsically safe for hydrogen (Group B) environments. Its Class I, Div 1 and 2, Group BCD approval means that it may be used in any hazardous gas environment, except acetylene. ...
Manufactured by:TQ Environmental Ltd. based inWakefield, UNITED KINGDOM
Robust stainless steel housing, makes these sensors suitable for hostile environments e.g. offshore, petrochemical works. High thermal mass, provides exceptional zero stability. Flameproof (EExd) suitable for Zones 1 & 2 applications No IS barriers required. Two-wire 4-20mA transducer Compatible with industry standard ...
Manufactured by:Mine Safety Appliances Co (MSA) based inCranberry Township, PENNSYLVANIA (USA)
The SMC 5100-XX-IT gas detector monitors toxic gases such as Hydrogen Sulfide, Carbon Monoxide, Nitrogen Dioxide, Ammonia, Oxygen Deficiency, and others. The detector requires calibration only every six months, cutting operating costs and time. As part of the SMC Sentry IT platform, the detector can be remotely diagnosed and calibrated via Remote Sensor ...
Manufactured by:Biosensor, S.L. based inMoncofar, SPAIN
The large number of toxic agents in the water might require an equally large number of specific sensors for each toxic. However, WOLA’s solution is to grow a specific indicator microorganisms – sensor microorganism – whose metabolism will be affected in a higher or lower range depending on the quantity ...
Manufactured by:Armstrong Monitoring Corporation (AMC) based inOttawa, ONTARIO (CANADA)
The AMC VersaTox was designed to provide detection for a wide range of hazardous gases, including CO, NO2, ammonia, chlorine, and oxygen. The optional features on the AMC VersaTox include concentration readout, AC power, onboard alarm relay, and a duct mountable ...
Manufactured by:Quatrosense Environmental Ltd. (QEL) based inRichmond, ONTARIO (CANADA)
The CTS-M5 Series is a microprocessor based transmitter. It uses an Electrochemical gas sensor to detect a variety of gases. Typical applications are enclosed parking facilities, refrigeration rooms and oxygen storage ...
Manufactured by:Quatrosense Environmental Ltd. (QEL) based inRichmond, ONTARIO (CANADA)
The QTS-6000 Series is the latest advancement in economical loop powered analog output toxic gas transmitters. This universal transmitter can be easily configured via solderless shorting links for any of a wide variety of plug-in electrochemical ...
Manufactured by:Pem-Tech, Inc. based inSugar Land, TEXAS (USA)
The Ultra1000 Wireless is a battery operated detector to monitor toxic gases in ambient air. The interface and the Radio Transceiver are housed in a flame proof instrument enclosure. The detectors monitors a variety of toxic gases in the parts per million (ppm) range, including: ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen, hydrogen chloride, hydrogen sulfide, nitric oxide, ...
Manufactured by:Senva, Inc. based inBeaverton, OREGON (USA)
Senva UL Listed TG Series sensors can be ordered as individual CO or NO2 sensors or as a combination CO/NO2 sensor in a shared enclosure. The analog output model features 2 outputs that support daisy chain wiring - multiple sensors may be used in a parallel sequence (0-10V) for cost effective coverage of large areas. The unit can also act as a stand alone controller, utilizing the relay for ...
Manufactured by:Rel-Tek Corporation based inMonroeville, PENNSYLVANIA (USA)
The CO2Boss/C includes a digital meter: the 4 digits cover the standard range of 0-5000 ppm, as well as other custom ranges. The 4-20mA analog output signal is standard. The electronics is modularized and potted to make it impervious to moisture and dust and is housed in an ABS enclosure. This three wire sensor consist of a + power a 4-20mA signal and a common. An LED current indicator provides a ...
Manufactured by:Rel-Tek Corporation based inMonroeville, PENNSYLVANIA (USA)
The CO2Boss/HC is higher concentration version of the CO2Boss/I. Not only does it have a higher range it is also classified for use in mines when connected to a matching letter class barrier. Barriers are available from Rel-Tek. The 4-20mA analog output signal is standard. The electronics is modularized and potted to make it impervious to moisture and dust and is housed in a fiberglass enclosure. ...
Manufactured by:Rel-Tek Corporation based inMonroeville, PENNSYLVANIA (USA)
This self contained unit houses an optical infrared source and solid state absorption analyzer, the electronics generate 4-20mA and 0-1VDC analog outputs plus a 110VAC power supply, two SPDT individually settable trip relays, a meter and a pump… all packaged in a 10x8x4 painted steel enclosure or a 10x7x7” (254x178x178mm) dust/water proof fiberglass enclosure. Weight is about 6 ...
Manufactured by:Rel-Tek Corporation based inMonroeville, PENNSYLVANIA (USA)
This self contained unit houses an optical infrared source and solid state absorption analyzer, the electronics generate 4-20mA and 0-1VDC analog outputs plus a 110VAC power supply, two SPDT individually settable trip relays, a meter and a pump… all packaged in a 10x8x4 painted steel enclosure or a 10x7x7” (254x178x178mm) dust/water proof fiberglass enclosure. Weight is about 6 ...