Refine by
Applications
- Air Pollution Measurements for Education
- Solutions for Ambient Air Monitoring - Air Pollution Monitoring
- Meteorology Solution for Meteorological Support for Fire Emergency Rescue
- Air Quality Monitors for Transportation Microenvironmentsring
- Laser based remote sensing instruments for remote dust monitoring applications
- Soil moisture monitoring solution for soil science industry
- Wind Lidar for Offshore construction and operations & maintenance wind monitoring
- Wind Lidar for Site Calibration to IEC 61400-12-1: 2017 Annex C
- Wind Lidar for Wind turbine / wind farm optimisation and due diligence
- Wind Lidar for Offshore platform metocean monitoring
- Sensors for Air Quality Measurements?
- Advanced cable handling solutions for defense industry
- Advanced cable handling solutions for environmental industry
- Advanced cable handling solutions for industrial industry
- Advanced cable handling solutions for offshore industry
- Advanced cable handling solutions for marine science industry
- Meteorology Solution for Wind Measurement Network in Complex Terrain
- Meteorology Solution for Early Fire Warning
- Environment Solution for Fine Traceability of Atmospheric Particulate Matter Pollution
- Environment Solution for Air Quality Improvement and Management in Key Regions
- Air Quality Monitors for Mobile Monitoring
- Air Quality Monitors for Vertical Profiling & UAVs
- Air Quality Monitors for Health Effects & Personal Exposure
- Air Quality Monitors for Community Monitoring
- Weather Decision Support Systems for Early Warning Systems
- Weather Decision Support Systems for Airports
- Weather Decision Support Systems for Spaceports?
- Water monitoring technology for flow & discharge sector
Vertical Profiling Equipment & Supplies
179 equipment items found
Manufactured by:Hydro BioScience, LLC (HBS) based inPiney Flats, TENNESSEE (USA)
The Vertical Profiler is our remote, solar powered, advanced water column monitoring system. This system was designed to both lower the costs of constant water monitoring and make water quality results readily available. It is easily managed and quickly set up, ready for deployment in as little as 20 ...
Manufactured by:Dulas Ltd based inMachynlleth, UNITED KINGDOM
Remote sensing devices are lightweight and easily transportable, they do not require planning permission and can be applied both offshore and onshore to gather wind data from 40m to 300m in height, with up to 20 separate height measurements taken every ...
Manufactured by:YSI Incorporated - a Xylem brand based inYellow Springs, OHIO (USA)
Automated water quality profiler for lakes, reservoirs and coastal areas. Featuring a submersible, watertight enclosure and a rugged non-corrosive mechanical winch and drive mechanism, the 6951 provides fully-automated data collection from a pontoon ...
Manufactured by:Sea-Bird Scientific - Veralto based inBellevue, WASHINGTON (USA)
The WET Labs, Inc. Thetis Profiler is a submersible vertically profiling platform for use in coastal marine and fresh water ...
Manufactured by:Del Mar Oceanographic LLC based inSan Diego, CALIFORNIA (USA)
The Wirewalker is a vertically profiling instrumentation-platform, powered by ocean waves. Through the Wirewalker’s rapid profiling and ability to integrate a wide variety of sensor payloads, it brings new life to typical one-dimensional sensor time-series as a 2-D depth-time image where an enormous increase in information and intuition is ...
Manufactured by:AML Oceanographic based inVictoria, BRITISH COLUMBIA (CANADA)
The Minos-X is a small vertical profiler that allows you to change the instrument’s sensor load, in-the-field and on-demand. With the Minos-X, your SVPT can become a CTD; Shallow pressure sensors can be swapped for deep; and temperature range can be extended or tightened, as needed. One single profiler meets multiple deployment ...
Manufactured by:WindCube - a Vaisala company based inOrsay, FRANCE
With more than 600 units operating worldwide, the Windcube is the reference remote sensor in the wind industry, providing accurate wind measurements up to 290 meters. Developers, power producers, consultants and manufacturers have selected it for their onshore and offshore projects – from energy yield assessment to power performance testing and ...
Manufactured by:MTE Instruments based inRimouski, QUEBEC (CANADA)
The MiniWinch Vertical Profiling System is an advanced device tailored for automatic oceanographic data collection across various depths. It is designed for long-term use in remote areas, offering a cost-effective solution. The system's intelligent algorithm assesses weather conditions and battery levels to ensure consistent and safe operation, preventing ...
Manufactured by:Harmony Enterprises, Inc. based inHarmony, MINNESOTA (USA)
Turn recycling into profit with this low profile baler! The M60MD Vertical Baler by Harmony Enterprises is a safe and efficient state-of-the-art piece of equipment that means more profit and less recycling! The M60MD Vertical Low Profile Baler is a high capacity vertical baler that fits under a standard ceiling. ...
Manufactured by:InterOcean Systems LLC based inSantee, CALIFORNIA (USA)
InterOcean Systems has been building Vertical Profiling winches for decades. Our VPS winches are all custom engineered for the task at hand. InterOcean VPS winches can be outfitted with stop switches, bare drum warning systems, break-away links, and even two-way acoustic modems for real-time communication and ...
Manufactured by:Mikrosize based inWuhu City, CHINA
High-precision optical system: It is equipped with a high-quality objective lens, which provides clear and sharp imaging. Under transmitted light illumination, the contour measurement error is less than 0.08%, and the magnification ratio is accurate and ...
Manufactured by:LG Sonic B.V. based inZoetermeer, NETHERLANDS
The most accurate and cost-efficient way to measure the entire water column. Measures in high resolution. Collects data at various depths. 50% more ...
Manufactured by:Cascade Drilling based inBothell, WASHINGTON (USA)
Lack of a sufficient understanding of the subsurface conditions often leads to underperforming remedies. Development of a valid Conceptual Site Model (CSM) is the single most important activity for ensuring that sound site management decisions, including remedy selection and design, are ...
Manufactured by:Vinci Technologies SA based inNanterre, FRANCE
GEOREC is a downhole digital tool designed for seismic acquisition in HP & HT conditions. Each GEOREC single level includes 3 fixed or gimballed geophones, with pressure and temperature gauges, and is provided with its own power supply and telemetry. Up to 48 GEOREC levels can be successively connected with a 7 conductors standard ...
Manufactured by:Vinci Technologies SA based inNanterre, FRANCE
GEOREC-S is a slim downhole digital tool designed for seismic acquisition in HT conditions. Each GEOREC-S single level includes 3 fixed geophones (optionally, the geophones can be replaced by accelerometers), pressure and temperature gauges and the level is provided with its own power supply and telemetry. Up to 48 GEOREC-S levels can be successively connected with a 7 conductors standard ...
Manufactured by:Kernic Systems Inc. based inBurlington, ONTARIO (CANADA)
The X10 HD Low Profile Vertical Baler from Bramidan is the industry leading low profile, multi-material baler for businesses with small waste volumes. With a press force of 22,000 lbs., retainer dogs to keep material compressed, and a frontal tie system, this machine is the perfect solution to your waste handling needs. ...
Manufactured by:J.M. Hydraulics, Inc. / Baletech Recycling Equipment. based inSun Valley, CALIFORNIA (USA)
Bale Size: 60" x 30" x 48". Bale Weight: 800 - 1,000 Lbs. - OCC. Cylinder: Twin, 4" Bore, x 36" - 2.5" Rod. Motor: 10 HP TEFC Motor, 208/230/460 Volt, 3 Phase. 1/4" Thick Sidewall ...
Manufactured by:Kernic Systems Inc. based inBurlington, ONTARIO (CANADA)
The X6030 Low Profile (LP) Vertical Baler from Bramidan is the industry leading mill-size low profile baler. With a press force of 88,200 lbs., retainer dogs to keep material compressed, and a frontal tie system, this machine is the perfect solution to your waste handling needs. ...
Manufactured by:Adams Fertilizer Equipment based inDeWitt, ARKANSAS (USA)
The Adams 13 Ton Low Profile Vertical Blender is the most popular blender in our low profile vertical blending series. This unique design is ideal for any floor plans with minimum space. Each Adams Vertical Blenders is built with a tapered auger, allowing for a smooth, gentle, and accurate ...
Manufactured by:Alkor Solar Systems based inMenderes, TURKEY
Alkor has been produced as a solution to solar roof projects in sandwich panel structure. It is produced as a solution for roofs of all types of sandwich panels with longitudinal profiles. Our clamps are compatible with all panel types with their adjustable length. Two pieces are applied to the right and left parts of the panel, the movement of the panel is prevented. Our aluminum profiles are ...