Show results for
Refine by
Sludge Processing Equipment Supplied In Austria
18 equipment items found
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
The Cambi Thermal Hydrolysis Process improves Anaerobic Digestion by using high temperature and pressure to break down complex substrates before they are introduced to the digestion process. Sludges treated through the Cambi process can also be introduced into a Digester at a much higher concentration. ...
Manufactured by:Inowa Abwassertechnologie GmbH based inMarchtrenk, AUSTRIA
Sludge Collection, Abstraction Basin, Process Water Basin, Collection Basin. Ideal for the use of sludge collection, abstraction basin, process water basin or colleciton basin up to a volume of 12.000 ...
Manufactured by:EnviroChemie GmbH - part of the EnviroWater Group based inRossdorf bei Darmstadt, GERMANY
High-performance biological process for wastewater treatment. Compact, space-saving process with high cleaning performance. Membrane bioreactors for wastewater treatment consist of an activated sludge process combined with subsequent membrane filtration, which removes both solids and sludge particles. Because any ...
Manufactured by:GKT GmbH based inGloggnitz, AUSTRIA
Solutions for solidsloaded streams up to free-flowing products. The thin film dryer is a special type of thin film evaporator. There are two types of thin film dryers, the vertical and the horizontal dryer. If these systems reach their limits when it comes to heat-sensitive products, the successful thin-film evaporator principle ensures gentle processes. Based on their wealth of experience and ...
Manufactured by:Inowa Abwassertechnologie GmbH based inMarchtrenk, AUSTRIA
INOWA is the specialist for washwater preparation of passenger car conveyor tunnels or large washing plants. With our system series WT 15 -50 a capacity range of 15.000 to 50.000 liter per hour is covered. So we are offering a high capacity preparation system for conveyor tunnel operators which is approved and at the same time simple to use. Together with our innovative oval basin technology from ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
Welded Manifolds are the modern Plug&Play solution for supplying the AEROSTRIP with air. Depending on the requirements of the aeration system and the reactor geometry, the AEROSTRIP manifolds are delivered custom-made. This enables easy and quick ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
Large diffuser surface - compactly installed. AEROSTRIP Modules combine the high performance of the strip diffuser with the quick and easy assembly of the plate diffuser. The AEROSTRIP modules are available in lengths of 2 - 4 meters and a width of 1 meter. Compared to other systems (plates, tubes, strips), modules have a significantly larger area, which means that less effort is required for ...
Manufactured by:SFC Umwelttechnik GmbH / SFC Schueffl & Forsthuber Consulting based inSalzburg, AUSTRIA
C-FLOC is a process for removing colloid particles from water by flocculation and sedimentation. The process takes place in 4 steps, each in an individual chamber and therefore at optimum mixing conditions and ripening periods, whereby the colloids are first transformed into micro-flocs and then into macro-flocks, which can be separated from the water very ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
The AEROSTRIPc is the high end product among the diffusers. It was designed as a fine-bubble diffuser with extremely low energy requirements and has been used in both municipal and industrial wastewater treatment plants worldwide since 1995. The diffuser body is made of high-alloy, corrosion-resistant stainless steel. This makes the AEROSTRIP Type T a durable and therefore particularly ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
The AEROSTRIP Type Q is one of the most powerful diffusers on the market. It was designed as a fine-bubble diffuser with extremely low energy requirements and has been used in both municipal and industrial wastewater treatment plants worldwide since 2005. The basic body of the AEROSTRIPs is made of high-quality PVC. Polyurethane is used as the material for the diffuser membrane. Polyurethane has ...
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
Sewage sludge dewatering offers enormous potential savings for the operators of sewage treatment plants. The costs of transport and disposal of the dewatered sewage sludge frequently make up 80% of operating costs. Depending on the capacity of the plant, 1% more dry substance in the dewatered sewage sludge can represent cost savings in the five- to six-digit range. ...
Manufactured by:SolarTiger GmbH based inGurten, AUSTRIA
SolarTiger stands for innovative and sustainable drying technology, using natural resources. Under the brand name of SolarTiger all components for the construction of a solar drying plant are launched. Thereby the components offered components range from automation of the solar drying, via dewatering of sludge, right through to the classical components for solar drying. The close alignment of ...
Manufactured by:EnviroChemie GmbH - part of the EnviroWater Group based inRossdorf bei Darmstadt, GERMANY
Anaerobe wastewater treatment is a proven technology for treating wastewater with high levels of organic contamination. Resource-saving wastewater treatment with a high degradation rate and energy recovery. Anaerobic processes for wastewater treatment are biological processes in which organic contaminants are converted into biogas and thus removed from the ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Self-cleaning crossflow filter for pressurized pipe sampling. Stamoclean CAT411 provides bacteria-free micro filtration of samples from pressure pipes. Its self-cleaning crossflow filter avoids filter blocking, thus increasing your process safety. Thanks to a minimized dead volume, it reflects changes of your process promptly and shortens the response time of your downstream measuring devices. ...
Manufactured by:Salsnes Filter based inNamsos, NORWAY
To save space and money, the enclosed SF systems contain an optional integrated dewatering process. Sludge drops into the collection area from the thickening process at 3 – 8 % DM and is conveyed across the unit by an auger. It can then be fed to a sludge stabilization process (e.g. direct digester feed); ...
Manufactured by:Biowater Technology AS based inTonsberg, NORWAY
The Biowater CFAS (IFAS) utilizes the benefit of a traditional activated sludge process combined with a biological fixed-film system to create a highly efficient wastewater treatment plant in a much smaller footprint. The process begins with the introduction of polyethylene biomass carriers into the activated sludge. The ...
Manufactured by:Salsnes Filter based inNamsos, NORWAY
To save space and money, the enclosed SF systems contain an integrated sludge thickening and dewatering process. Typical dewatering results are 20–30% DM. For larger installations, a stand-alone dewatering unit is available (shown below) to dewater sludge from multiple filters. It applies higher pressure to produce even drier ...
Manufactured by:Körting Hannover AG based inHannover, GERMANY
Using a liquid as motive medium, liquid jet gas compressors compress gases or vapours with large pressure differences. There is a special ejector design for mixing air or other gases with the motive liquid or for aerating waste water. These ejectors operate at a high gas/liquid mass transfer rate with simultaneous intensive mixing of the liquid ...