- Home
- Equipment
- canada alberta
- process pump
Show results for
Refine by
Process Pump Equipment Supplied In Alberta
21 equipment items found
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
Overhung pump desgined to API610 requirements. Centerline Supported heavy duty design offers optimum operation under high temperature and pressure. Maximum parts interchangeability. Provided optionally with an inducer for low NPSH required ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
Standard chemical process pumps of the Mark3 ISO range arehorizontal, single-stage volute casing pumpswith dimensions to ISO 2858. They meet the technical requirements of ISO 5199, ISO 15783. It is a modular configuration of either bare shaft end or close-coupled design. ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
The Flowserve DS-RO single-stage, end-suction, foot-mounted pump is engineered specifically for auxiliary applications found in reverse osmosis desalination processes. This versatile pump is well-suited for plant support services such as filtered water, low- or high-pressure feed boosting, potable water, backwash and others. ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
The Worthington DS end-suction, double volute single-stage pump with a back pullout configuration is engineered for a wide variety of industrial services. Developed in accordance with ISO 5199, this versatile foot mounted pump is well-suited for mining, water, desalination, power and general industrial applications requiring lower operating and maintenance costs. Optimized hydraulics combined ...
Manufactured by:Magnatex Pumps, Inc. based inHouston, TEXAS (USA)
The MAXP Series of pumps has been designed to conform to ANSI B73.3 dimensional standards. The pumps are extremely rugged, which makes them ideal for rigorous duty in the chemical and petrochemical ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Digital process meter in panel mounted housing for monitoring and displaying analog measured values. The process meter monitors and displays the analog measured values. Pumps can be monitored with the digital status inputs. The RIA452 can provide power directly to two-wire sensors connected. Up to eight freely programmable relays monitor the ...
Manufactured by:Magnatex Pumps, Inc. based inHouston, TEXAS (USA)
The MLZ series pumps are ANSI/ASME B73.3 fluoropolymer lined sealless magnetic drive models. They feature separable impellers and inner magnets, as well as readily replaceable front thrust and impeller rings. With no seals to fail, these pumps are ideal for a wide range of chemical applications to help eliminate “reportable release” ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
Horizontal, single-stage volute casingpumps with design features and nominal rating toDIN EN ISO 2858. For pumping of liquids with high temperatures (> 200 ºC) special executions with centre line feet are available upon request. The process design permits dismantling of the complete bearing unit towards the drive end, without the pump ...
Manufactured by:A.R. Thomson Group Inc. based inSurrey, BRITISH COLUMBIA (CANADA)
The TAC-11 is a full cartridge design. It is a single stationary multi-spring seal with an elliptical gland. It is a great replacement for two-bolt gland & packing configurations and component seal applications. Many consider this seal to be the next step up from two-bolt gland & packing configurations and component seals. All of A.R. Thomson Groups ANSI mechanical seals are balanced ...
Manufactured by:A.R. Thomson Group Inc. based inSurrey, BRITISH COLUMBIA (CANADA)
The TAC-33 is a full cartridge design. It is a single stationary multi-spring seal with a four-bolt stuffing box arrangement. The TAC-33 has flush, quench, and drain ports. The TAC-33 utilizes tangential flush ports in combination with a pumping ring to increase the flow of flush media through the seal. Two tangential flush ports are machined into the seal for both directions of rotation. These ...
Manufactured by:Garnet Instruments Ltd based inSherwood Park, ALBERTA (CANADA)
The SeeLeveL Annihilator is the preferred liquid level measurement system in the waste water transport industry. While the SeeLeveL Annihilator system is widely used in vacuum tanks that haul sewage and grease, it can be used for any non-flammable liquid. Users can choose between the 806-B (exterior mounted) or the 806-Bi (in-cab mounted) displays, which can each monitor up to three ...
Manufactured by:Hazloc Heaters based inCalgary, ALBERTA (CANADA)
The HUH2 series of heat-exchanger unit heaters is designed for rugged industrial applications in steam, hot water, glycol or other fluid circulating heating systems. The HUH2 series is designed for pressures and temperatures up to 400 psi and 550 °F respectively in single-pass and multi-pass core configurations with multi-pass units greatly improving performance characteristics when used with ...
Manufactured by:Magnatex Pumps, Inc. based inHouston, TEXAS (USA)
Heavy-duty, rugged, world-class quality, ANSI process pumps manufactured to meet the latest ASME B73.1-2001 standard (revision of ASME B73.1M-1991). Pumps are manufactured in 29 sizes from a wide variety of materials, and offer seal options and seal flush systems to handle almost any application in the process ...
Manufactured by:Sulzer Ltd. based inWinterthur, SWITZERLAND
Sulzer helicoaxial multiphase pumps enable boosting of the oil/gas/water mixture from producing wells, without separating the gas from the liquids. They are successfully deployed in remote or subsea location, thus making wells and fields economically ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Omnitrol Model 610 single stage control and the Model 710 two stage control are top mounted level switches of the adjustable differential type and utilize graphite as standard displacer material. Graphite, which is an extruded material having no binders to fail, is virtually indestructible making it ideal for corrosive application controlling chemical and petroleum products in wide ...
Manufactured by:Ashcroft Inc. based inStratford, CONNECTICUT (USA)
The Ashcroft A2 industrial pressure transmitter is designed to satisfy the requirements of industrial applications. This versatile model proves ideal for demanding pressure measurement. ...
Manufactured by:GECIL Process based in69450, FRANCE
Fully automatic ASTM D2892 unit for distillation of crude oils, bio-fuels or petroleum cuts, with automatic procedure from initial heating to reduced pressure. No operator intervention up to the final boiling point (FBP) and automatic return to atmospheric ...
Manufactured by:GECIL Process based in69450, FRANCE
Fully automatic ASTM D1160 unit for distillation of crude oil residue or lubricating cuts, with automatic procedure from preheating to reduced pressure. No operator intervention up to the final boiling point (FBP) and automatic return to atmospheric ...
Manufactured by:GECIL Process based in69450, FRANCE
Fully automatic distillation unit, in accordance with ASTM D1160 method, distills crude oil residue or lubricating cuts with automatic procedure from preheating to reduced pressure, up to the final boiling point (FBP) and return to atmospheric pressure, without any intervention of the ...
Manufactured by:Sulzer Ltd. based inWinterthur, SWITZERLAND
The SNS end suction single stage pump range has been designed to exceed the highest energy efficiency regulations across all industries and also the design requirements of ISO 5199 international standard. The innovative design makes the pump more reliable while significantly reducing total cost of ...