- Home
- Equipment
- canada quebec
- process analysis
Refine by
Applications
- Water & environmental data acquisition solutions for water resource management industry
- Precise detection instruments for research industry
- Air pollution, emission and process monitoring systems for water & liquids
- Hydrological and environmental monitoring Systems for Groundwater monitoring industry
- Water & environmental data acquisition solutions for soil monitoring industry
Process Analysis Equipment Supplied In Quebec
83 equipment items found
Distributed by:Novatech Analytical Solutions Inc. based inSte-Anne-de-Bellevue, QUEBEC (CANADA)
The operation of the majority of industrial process facilities requires the use of online gas or liquid analyzers to provide fast, reliable, and accurate feedback of conditions within processing units. ...
Manufactured by:GRIMM Aerosol Technik GmbH & Co. KG - a member of the Durag Group based inHamburg, GERMANY
The 11-D is the optimal solution for reliable, flexible and real-time measurements for aerosol research and indoor air quality, e. g. at workplaces, interior of vehicles, or for process ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Certified Multi-sensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zone and in dry processess with elevated pressures. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes. The PA-2 was specially designed for process analysis and operation under harsh industrial condition. The system comes with either the VM-3000 or the UT-3000 photometer to meet different requirements regarding accuracy and sensitivity of ...
Manufactured by:CI Analytics based inChambly, QUEBEC (CANADA)
Total analysis and multi-stream process analyzer for gases, liquids and LPGs in the oil and gas industry. This highly robust and reliable unit can meet the stringent demands of a hazardous area while providing the user with maximum flexibility for analysis parameters. ...
Manufactured by:CI Analytics based inChambly, QUEBEC (CANADA)
Versatile process analyzer ideal for detecting impurities in the oil and gas industry. Having a fixed calibration curve and a single range is often not sufficient to meet your specific requirements. This is where the 9710 Process Analyzer shines through, allowing users to detect 11 different impurities (one at a time) and measure up to four ...
Manufactured by:Sensor, spol. s r.o. based inPezinok, SLOVAKIA
The Sensor DDS® RMS (Remote Monitoring System) is a mid level system developed by Sensor for installation in conjunction with a fixed system. It is installed permanently into the ground below the geomembrane and uses point sensors arranged in a grid format. It also provides even more control over the integrity of the geomembrane than offline solutions. ...
Manufactured by:Sensor, spol. s r.o. based inPezinok, SLOVAKIA
The SENSOR DDS RMS is system developed by Sensor s.r.o. where regular/irregular grid of sensors is installed permanently into the ground below the geomembrane. Online SENSOR DDS RMS system is giving the opportunity to have even more control over the integrity of the geomembrane then offline solutions. SENSOR DDS RMS is online system which means that Sensor technicians don’t have to travel ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The LCPD BOX is a full extractive sampling probe assembly which extracts the sample gas through a probe & heated filter to remove particulates. To be used with heated analyzers, or with unheated analyzers such as MIR 9000, MIR 9000e, IR IS, by adding a cooling dryer ...
Manufactured by:CI Analytics based inChambly, QUEBEC (CANADA)
Automated multiple standard gas dilution unit for generation of in-house calibration standards. A portable, fully automated, multi-compound calibration gas generator that provides the user with maximum flexibility and accuracy when creating calibration blends. This dynamic unit can also be fully integrated in your process analyzer at the time of purchase – ensuring space maximization and ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Data communication and IT infrastructure are merged under one user interface experience. eTracker was designed from the ground up to embrace the current and future trends of cloud-based remote data acquisition and the “Internet of Things” (IoT) revolution. This paradigm shift centralizes all the historically isolated processes of remote configuration, programming, ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Multi-sensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
Manufactured by:LDetek Inc. - a brand by Process Sensing Technologies (PST) based inThetford Mines, QUEBEC (CANADA)
PlasmaDetek from LDetek is a microprocessor-based plasma emission detector system. It has an intelligent, customizable configuration capability to make industrial gas chromatography simple and accessible across a wide range of applications. An ‘all in one’ detector, it not only enables existing analysis but also makes new analysis techniques available. Designed for GC systems ...
Manufactured by:LDetek Inc. - a brand by Process Sensing Technologies (PST) based inThetford Mines, QUEBEC (CANADA)
PlasmaDetek 2 from LDetek is a microprocessor-based plasma emission detector system. It has an intelligent, customizable configuration capability to make industrial gas chromatography simple and accessible across a wide range of applications. An ‘all in one’ detector, it not only enables existing analysis but also makes new analysis techniques available. Designed for GC systems ...
Manufactured by:Servomex - a Spectris Company based inSugar Land, TEXAS (USA)
High performance combustion process analysis of oxygen and combustibles, designed for use in the most hazardous and challenging locations. Armed with an integral sampling system custom-designed for operation in some of the hottest and most extreme combustion environments, the FluegasExact is the analyzer of choice for measuring oxygen and combustibles in the most ...
Manufactured by:Mettler - Toledo Int. Inc based inGreifensee, SWITZERLAND
Immersion housings of the InDip range from METTLER TOLEDO are designed for use in open tanks and channels. They allow the easy mounting of electrodes/sensors with Pg 13.5 thread for immersion into the sample media. They are available with different immersion depths. Wetted parts are made of robust, resistant polymer materials to withstand aggressive and abrasive ...
Manufactured by:DKK-TOA Europe - Grantchester Technology Ltd. based inCambridge, UNITED KINGDOM
The AUT-801 is a sophisticated laboratory auto titrator designed to automate precise titration processes in various chemical analysis settings. It improves both accuracy and efficiency by automating the delivery and mixing of titrants and samples, reducing human error. Capable of handling various types of titrations, including potentiometric, the device is suited ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
They are augmented with an additive Ecopure which makes them biodegrade* when discarded. BioBailers have been tested for non-leaching using the SPLP EPA 1312 extraction process followed by analysis using EPA 8260 for volatiles and EPA 8270 for semi-volatiles. This is a long duration test of 18 hours, which greatly exceeds the expected use time of a disposable ...
Manufactured by:Ovarro based inEckington, UNITED KINGDOM
EnigmahyQ is a variant of the standard Enigma multi-point correlation logger that has been further optimised for leak location in large diameter pipes and over longer ...
Manufactured by:Mettler - Toledo Int. Inc based inGreifensee, SWITZERLAND
InFlow76X flow-through housings from METTLER TOLEDO are designed to enable safe and reliable mounting of the InTrac and InFit Series sensor housings directly into the process or in a bypass (pipe). These rugged flow-through housings are specially suited to the requirements of the process industry and can be easily and safely installed, allowing reliable measurement ...