Show results for
Refine by
Setpoint Temperature Controller Equipment Supplied In Cyprus
8 equipment items found
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The 3508P1 controller provides programmable temperature control using up to 20 segments. Each segment may be defined as a ramp a step or a dwell. The 3508P10 controller has all of the functionality of the 3508P1 with the additional capability of being able to store up to 10 programs with 50 segments per program. The 3508P25 controller has all of the functionality of the 3508P1 with the additional ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The nanodac in recorder only mode comprises a compact, sophisticated and economical paperless chart recorder / DAQ (digital acquisition) recorder. In this mode it must be used in combination with a conventional temperature controller. Up to 14 virtual channels for example performing averaging on the data. Data is continuously logged into either a CSV (comma separated value) or UHH (Eurotherm ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The 2132 furnace controller is mainly used as an over-temperature protection device. All Carbolite Gero furnaces and ovens are designed to 'fail safe' should control of the elements fail. None the less, use of an over-temperature protection device is recommended for situations where there will be unattended operation of the device or simply where protection of valuable loads or the furnace is ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The R38 Basic PID Set-point Controller is used in the Apex Ovens together with a thermocouple ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The CC-T1 touch screen controllers offer programmable control in which 24 segments may be set as ramp, step or dwell and may also be configured to control relays. The CC-T1 series provides a touch screen interface giving intuitive access to a comprehensive menu including: selection and editing of program profiles; scheduling of programs at a ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The tube furnace range GHA (single zone) / GHC (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters. The extended uniform zone in the mid-section of the work tube in the GHC 3-zone furnace is achieved with the use ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The CTF single zone and TZF 3-zone wire wound tube furnaces use a wire element that is wound directly onto a fixed diameter integral ceramic work tube. This simple and economical design of both the CTF and TZF provides a tube furnace that can be used without the need to purchase an additional work tube. However, should vacuum or a modified atmosphere be required, it is necessary to use a separate ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The tube furnace range GVA (single zone) / GVC (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility with the use of tube adapters the same furnace can be used with a variety of tube diameters. The extended uniform zone in the mid-section of the work tube in the GVC 3-zone furnace is achieved with the use ...