- Home
- czech republic
- Equipment
Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Dedusting Filter Elements for the Pharmaceutical Industry
- Dedusting Filter Elements for the Food Industry
- Filter Elements for Additive Manufacturing
- Filter Elements for Chemistry & Pharmacy
- Filter Elements for Metal Working & Processing
- Filter Elements for Plastics Industry
- Filter Elements for Containment Industry
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Surface Technology
- Filter Elements for Mining Industry
- Filter Elements for Air Purifier, Virus Sterilizer
- Filter Elements for Wood Working & Processing
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Pleated Filter Elements for Dust Removal and Air Filtration
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Control Systems for Fire Testing
- Air Pollution Control Systems for Integrated Effluent Treatment
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Activated carbon solutions for wastewater treatment plant industry
- Activated carbon solutions for groundwater remediation system sector
- Activated carbon solutions for drinking water treatment industry
- Activated carbon solutions for activated carbon exchange on site industry
- Activated carbon solutions for purification plant industry
- Activated carbon solutions for waste air treatment chemical industry
- Activated carbon solutions for sewage gas cleaning industry
- Activated carbon solutions for biogas treatment industry
- Activated carbon solutions for groundwater treatment construction site industry
- Activated carbon solutions for mobile environmental remediation industry
- Industrial Waste Shredders for Waste to energy
- Water treatment solutions for swimming pool water treatment
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Air pollution, emission and process monitoring systems for agriculture
- Electronic pressure measurement devices for Machinery and plant construction industry
- Air pollution, emission and process monitoring systems for metals
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Water treatment solutions for cooling water treatment
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Flow Solutions for Climate Change and Clean Energy
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
Xprt Equipment Supplied In Czech Republic
9,481 equipment items found
Showcase
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
The Optical Vege-Trimmer™ delivers precision automated cutting for carrots and parsnips, combining advanced optical technology with EHEDG-inspired hygienic design to maximise yield and efficiency. The Optical Vege-Trimmer™ represents a significant shift in vegetable processing technology. Developed in-house at Wyma Solutions, it is a unique, fully automated optical vegetable trimming ...
Showcase
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc. The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the application. Features: - differential pressure von 1 ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Portable two-channel pH/conductivity measuring instrument for parallel measurement of pH/mV/conductivity/TDS/salinity and temperature. You will be optimally equipped for measurements outdoors with this battery-operated measuring ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Conductivity module for operation with a PC, including tiamo™ light software, 5-ring conductivity measuring cell and calibration standards. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. Thanks to the galvanically isolated measuring ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Innovative, modular potentiometric OMNIS Titrator for stand-alone operation or as the core of an OMNIS titration system for endpoint titration and equivalence point titration (monotonic/dynamic). Thanks to 3S Liquid Adapter technology, handling chemicals is more secure than ever before. The titrator can be freely configured with measuring modules and cylinder units and can have a rod stirrer ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Screen-Printed Palladium Electrode. Suitable for working with microvolumes, for decentralized assays or to develop specific sensors. ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Portable metal analyzer for the determination of heavy metals such as arsenic, mercury, copper, lead, zinc, nickel, cobalt, iron, bismuth or antimony in the trace range. Instrument version for the scTRACE Gold. The system is comprised of potentiostat and separate measuring stand with integrated stirrer and replaceable electrode. The instrument is operated with the Portable VA Analyzer ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
Brentwood's Polychem NCS-720-S Collector Chain is among the strongest 720-series chains on the market. Precision molded from durable, glass-reinforced polyester, this lightweight chain withstands high sludge loadings in corrosive environments. Our collector chain can also be protected with barrel wrap for high grit or highly caustic conditions. By reducing barrel wear, the chain lasts longer and ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
96X Multi-Walled Carbon Nanotubes modified Screen-Printed Carbon Electrode. Formed by 96 three-electrode electrochemical cells. Gold plated contact paths are printed in the backside of the plate. ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
0 – 120 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO2 metering capacity of 600 m3/h, up to 6 points of injection possible as standard. Flexible solutions for the production and metering of ClO2 adapted to our customer's tasks, requirements and anticipated pricing. ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Disinfection byproducts from water treatment are suspected not only of being health hazards but even of being carcinogenic. Oxyhalides have therefore become the subject of many investigations and standards (e.g., EPA 300.1 Part B, EPA 317.0, EPA 326.0). Of primary concern is bromate, which forms from bromide during the ozonization of drinking water. ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
VoltIC Professional unites ion chromatography and voltammetry in a single, powerful system for trace ion analysis. It enables fully automated, simultaneous determination of transition metals by VA and of anions and cations by IC. This is accompanied by considerable time and cost savings. ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
For flows of 4 – 25 m3/h; The proportional metering system Promatik is used in the potable water sector for the flow-dependent, adjustable metering of liquid media, like the EXACTAPHOS. It consists of the metering pump Beta, a contact water meter, a suction assembly with foot valve, level switch and wall bracket, and an injection valve and metering ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Taking care of all kinds of dosing and liquid handling tasks, Dosimat plus instruments are indispensable in many modern laboratories. Used as an independent system, the Dosimat plus is a manually controlled dosing instrument. If you are already using a Titrino or Titrino plus titrator in your lab, you can use the Dosimat plus as an automated dosing device for your titrator. For improved user ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
Brentwood’s Polychem sprockets are molded from a specially selected, high-strength Nylon material that outwears and outlasts UHMW-PE and polyurethane sprocket alternatives. All sprockets are equipped with standard integral teeth to maintain tooth alignment and are designed for use with Polychem collector ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The new Delta Hybrid direct driven sizes are the technological evolution of the AERZEN screw blower series. The future has just begun thanks to a super efficient newly designed stage with 3+4 rotors profile and a new drive concept for low pressure applications, a reduced footprint with side by side installation, a no-space adder Plug & Play solution with integrated starter, possibility to ...