- Home
- czech republic
- Equipment
Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Dedusting Filter Elements for the Pharmaceutical Industry
- Dedusting Filter Elements for the Food Industry
- Filter Elements for Additive Manufacturing
- Filter Elements for Chemistry & Pharmacy
- Filter Elements for Metal Working & Processing
- Filter Elements for Plastics Industry
- Filter Elements for Containment Industry
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Surface Technology
- Filter Elements for Mining Industry
- Filter Elements for Air Purifier, Virus Sterilizer
- Filter Elements for Wood Working & Processing
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Pleated Filter Elements for Dust Removal and Air Filtration
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Control Systems for Fire Testing
- Air Pollution Control Systems for Integrated Effluent Treatment
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Activated carbon solutions for wastewater treatment plant industry
- Activated carbon solutions for groundwater remediation system sector
- Activated carbon solutions for drinking water treatment industry
- Activated carbon solutions for activated carbon exchange on site industry
- Activated carbon solutions for purification plant industry
- Activated carbon solutions for waste air treatment chemical industry
- Activated carbon solutions for sewage gas cleaning industry
- Activated carbon solutions for biogas treatment industry
- Activated carbon solutions for groundwater treatment construction site industry
- Activated carbon solutions for mobile environmental remediation industry
- Industrial Waste Shredders for Waste to energy
- Water treatment solutions for swimming pool water treatment
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Air pollution, emission and process monitoring systems for agriculture
- Electronic pressure measurement devices for Machinery and plant construction industry
- Air pollution, emission and process monitoring systems for metals
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Water treatment solutions for cooling water treatment
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Flow Solutions for Climate Change and Clean Energy
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
Xprt Equipment Supplied In Czech Republic
9,480 equipment items found
Showcase
Manufactured by:Sierra Instruments, Inc. based inMonterey, CALIFORNIA (USA)
Sierra was the first to introduce multivariable mass vortex flow meters to the market in the late 1990s with the InnovaMass "S-Series" product line--the 240S and 241S. The InnovaMass 240S inline version is a true workhorse in applications ranging from large pipes and ducts, to high pressure and saturated or superheated steam. The InnovaMass 241S is manufactured as a volumetric only version or a ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
The Optical Vege-Trimmer™ delivers precision automated cutting for carrots and parsnips, combining advanced optical technology with EHEDG-inspired hygienic design to maximise yield and efficiency. The Optical Vege-Trimmer™ represents a significant shift in vegetable processing technology. Developed in-house at Wyma Solutions, it is a unique, fully automated optical vegetable trimming ...
Showcase
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The high-pressure transmitter type DMP 304 has been especially designed for applications with highest demand on precision and reliability. DMP 304 series is based on a compensated strain gauge, bonded onto a stainless steel diaphragm. Due to the rugged stainless steel housing usage under extreme conditions and in IS-required areas is no problem. Features: - nominal pressure: 0 ... 2000 bar up to ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
Smaller post-harvest processing operations need flexibility and performance. This example of a 5-ton per hour carrot wash line offers just that. Produce can be received onto an Elevator or via a Manual Bin Tipper into a Wet Hopper (a 2-ton capacity hopper is shown here). After an initial soak, produce is lifted out of the hopper and fed onto a Hedgehog Top Remover. This specialised machine ...
Showcase
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
This 20-ton per hour carrot line is able to receive from different-sized bins. Produce enters the line from large 4-ton bins via the Mega-Tip Rotary Bin Tipper and 1-ton bins via the Electric Bin Tipper. In this example both are manually loaded by forklift. The carrots are gently received into the Wet Hopper and then soaked. From here they are elevated to the Hedgehog Top remover and are ...
Showcase
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
When scale and precision are important the configuration options available in this example of a 45-ton per hour line become a necessity. Three receiving systems are showcased, including a traditional Truck Washout, a Bin Tipper and an auto bin-handling system. In each case the carrots are gently received into Wet Hoppers, soaked and then elevated to the Hedgehog Top remover before being ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Graduated measuring ranges 0.01 – 200 mg/l, special measuring range up to 1,000 mg/l. The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN Positive Displacement Blowers have been manufactured since 1868 and today we are highly developed standard production machines designed and adapted to find use in a wide variety of applications and specialise in air and neutral ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Automated analysis system for high-performance, flexible trace determinations with voltammetry and polarography with the Multi-Mode Electrode pro or the scTRACE Gold. Comprising 884 Professional VA for MME, 919 IC Autosampler plus for VA, two 800 Dosinos, 843 Pump Station, measuring head for rotating disk electrodes, and extensive accessories. For sample series of up to 28 ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
The structure and the high specific surfaces from 70 to 320 m2/m3 of BIOdek cross-fluted fills are perfectly adjusted to all requirements in biological sewage treatment processes. Different shapes of the fills allow growing thin or thick biofilms depending on what the process ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
They supply the highest differential pressures or pressure ratios in the AERZEN product portfolio – the oil flooded compressor series VMY. VMY compressors are the ideal solution for low molar weights, coolants, and generally for fluctuating operation conditions and gas ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 780 pH Meter and 781 pH/Ion Meter are the instruments of choice for those seeking an elevated level of technical comfort and freedom in their measurements of pH, ORP, Ipol, Upol, and ion concentrations. The meters, which are equipped with built-in quality assurance, guarantee reliable results at all times. Features such as the internal method memory and the possibility to connect different ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
TUBEdek lamella clarifiers, also called tube settlers, are used for solids removal (sedimentation processes) in water and sewage treatment. TUBEdek can be used in rectangular and in circular ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Auto Boat Drive (ABD) automatically guides the sample boats into the combustion oven. The sample can be put into the boat manually or using an appropriate sampler. This product made by Analytik Jena has been specially optimized for coupling with ion ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The direct-drive GM-HP blowers from AERZEN are high-performance machines. 1 or 2 stage design, with separate pressurised oil lubrication for the oil-free transport and compression of air, neutral gases, and gas ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Computer-controlled titration module for thermometric titration. Without ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 2029 Process Photometer performs sensitive photometric absorption measurements in the visible light range. Detection limits in the low ppb range make this an attractive instrument for a variety of applications. At the heart of the analyzer is a high performance compact photometer module ready for 24/7 online measurement. It comprises a thermostated cuvette with 3 cm light path and LED ...