- Home
- czech republic
- Equipment
Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Dedusting Filter Elements for the Pharmaceutical Industry
- Dedusting Filter Elements for the Food Industry
- Filter Elements for Additive Manufacturing
- Filter Elements for Chemistry & Pharmacy
- Filter Elements for Metal Working & Processing
- Filter Elements for Plastics Industry
- Filter Elements for Containment Industry
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Surface Technology
- Filter Elements for Mining Industry
- Filter Elements for Air Purifier, Virus Sterilizer
- Filter Elements for Wood Working & Processing
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Pleated Filter Elements for Dust Removal and Air Filtration
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Control Systems for Fire Testing
- Air Pollution Control Systems for Integrated Effluent Treatment
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Activated carbon solutions for wastewater treatment plant industry
- Activated carbon solutions for groundwater remediation system sector
- Activated carbon solutions for drinking water treatment industry
- Activated carbon solutions for activated carbon exchange on site industry
- Activated carbon solutions for purification plant industry
- Activated carbon solutions for waste air treatment chemical industry
- Activated carbon solutions for sewage gas cleaning industry
- Activated carbon solutions for biogas treatment industry
- Activated carbon solutions for groundwater treatment construction site industry
- Activated carbon solutions for mobile environmental remediation industry
- Industrial Waste Shredders for Waste to energy
- Water treatment solutions for swimming pool water treatment
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Air pollution, emission and process monitoring systems for agriculture
- Electronic pressure measurement devices for Machinery and plant construction industry
- Air pollution, emission and process monitoring systems for metals
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Water treatment solutions for cooling water treatment
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Flow Solutions for Climate Change and Clean Energy
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
Xprt Equipment Supplied In Czech Republic
9,481 equipment items found
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
The Optical Vege-Trimmer™ delivers precision automated cutting for carrots and parsnips, combining advanced optical technology with EHEDG-inspired hygienic design to maximise yield and efficiency. The Optical Vege-Trimmer™ represents a significant shift in vegetable processing technology. Developed in-house at Wyma Solutions, it is a unique, fully automated optical vegetable trimming ...
Showcase
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc. The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the application. Features: - differential pressure von 1 ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
BIOdek Fills with tubular design are used for biological water treatment and nitrification by contact aeration and for the separation of oil, fat and hydrocarbons. The fill consists of uniform parallel pipes (Tubes) with hexagonal shape. This design makes the BIOdek FAP specifically resistant to blockage and easy to ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline preconcentration technique, Inline Matrix Elimination, sequential suppression, and conductivity detection enables ultratrace analysis down to the lowest ppt range (ng/L) of anions or cations in complex ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with post-column derivatization and UV/VIS detection enables fully automated determination of anions, cations, and additional components that can be converted using post-column derivatization into products with optical ...
Premium
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
Our Floating Debris Remover removes unwanted buoyant debris from the Wyma Wet Hopper. Wyma’s Floating Debris Remover comes standard on all Wyma Wet Hoppers, however it can be retrofitted to preexisting equipment should you need to purchase at a later date. The Floating Debris Remover allows the additional removal of buoyant and unwanted material that remains at surface level. Designed to be ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Our new O2-Lumitrode is an optical sensor for the determination of dissolved oxygen in water or other liquid samples. Compared with conventional, galvanic sensors, the O2-Lumitrode is much easier to handle and has a longer service life. In addition, this optical sensor is completely maintenance-free. The measuring optics of the sensor are protected from mechanical stress and external ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
High-end pH/ion meter based on the 867 pH Module, including tiamo™ light, 854 iConnect and intelligent "iUnitrode" pH glass electrode. In addition to measurements of pH, temperature, mV, Ipol, Upol and concentration, the pH Module can perform standard additions (manual, dos, autodos) and Liquid Handling (add, prep, empty). It enables the use of both conventional and intelligent sensors ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, waste water treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 930 Compact IC Flex Oven/SeS is the intelligent Compact IC instrument with column oven and sequential suppression. An 800 Dosino can be used for the regeneration of the suppressor. The instrument can be used with any separation and detection ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 2035 Process Analyzer for Photometric Measurements includes a compact photometer module which is stable over a large concentration range, and is thermostated with stirrer capabilities. This analyzer is offered with two options: a cuvette system or a fiber optic dipping probe. The cuvette system is compact in order to reduce reagent consumption, yet it offers a long optical path length for ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
5-200 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO2 metering is 1,000 m3/h. Chlorine dioxide system, which continuously produces ClO2 according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Mira DS Flex package allows the user to customize the Mira DS to meet their needs. The Flex package includes the basic components needed to operate the Mira DS without sampling attachments. At least one sampling attachment is required for operation. The Mira DS Flex package includes the library of illicit materials, a calibration standard, USB cable and laser safety goggles. Class 3B ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
NIRS XDS Process Analyzer systems can measure a variety of sample types, such as granules, powders, liquids, slurries, or opalescent substances, among others. These analyzers provide fast, nondestructive analysis of pharmaceutical, chemical, and petrochemical products. If required, up to 9 inline measuring channels can be multiplexed with this system. ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Metrosep Organic Acids - 250/7.8 is a polymer-based cation exchanger column. It is the high-performance column for the determination of organic acids and for the solution of difficult and complex separation problems. In addition, carbonate (with inverse suppression), fluoride (hydrofluoric acid) and phosphate (phosphoric acid) can be determined along with organic acids. In comparison with the ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The PGSTAT302N MBA (Multi BA) is a special version of the PGSTAT302N which can be fitted with up to 6 working electrodes. Besides the main working electrode, 5 additional bipotentiostat modules (BA module) can be installed in the instrument, alongside the optional FRA32M ...