- Home
- czech republic
- Equipment
Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Dedusting Filter Elements for the Pharmaceutical Industry
- Dedusting Filter Elements for the Food Industry
- Filter Elements for Additive Manufacturing
- Filter Elements for Chemistry & Pharmacy
- Filter Elements for Metal Working & Processing
- Filter Elements for Plastics Industry
- Filter Elements for Containment Industry
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Surface Technology
- Filter Elements for Mining Industry
- Filter Elements for Air Purifier, Virus Sterilizer
- Filter Elements for Wood Working & Processing
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Pleated Filter Elements for Dust Removal and Air Filtration
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Control Systems for Fire Testing
- Air Pollution Control Systems for Integrated Effluent Treatment
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Activated carbon solutions for wastewater treatment plant industry
- Activated carbon solutions for groundwater remediation system sector
- Activated carbon solutions for drinking water treatment industry
- Activated carbon solutions for activated carbon exchange on site industry
- Activated carbon solutions for purification plant industry
- Activated carbon solutions for waste air treatment chemical industry
- Activated carbon solutions for sewage gas cleaning industry
- Activated carbon solutions for biogas treatment industry
- Activated carbon solutions for groundwater treatment construction site industry
- Activated carbon solutions for mobile environmental remediation industry
- Industrial Waste Shredders for Waste to energy
- Water treatment solutions for swimming pool water treatment
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Air pollution, emission and process monitoring systems for agriculture
- Electronic pressure measurement devices for Machinery and plant construction industry
- Air pollution, emission and process monitoring systems for metals
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Water treatment solutions for cooling water treatment
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Flow Solutions for Climate Change and Clean Energy
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
Xprt Equipment Supplied In Czech Republic
9,481 equipment items found
Showcase
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc. The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the application. Features: - differential pressure von 1 ...
Showcase
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
The Optical Vege-Trimmer™ delivers precision automated cutting for carrots and parsnips, combining advanced optical technology with EHEDG-inspired hygienic design to maximise yield and efficiency. The Optical Vege-Trimmer™ represents a significant shift in vegetable processing technology. Developed in-house at Wyma Solutions, it is a unique, fully automated optical vegetable trimming ...
Showcase
Manufactured by:R + B Filter GmbH based inLangenbrettach-Langenbeutingen, GERMANY
520-498 mm Filter Panel : Resilient to large concentrations of dust. Efficient cleaning thanks to the flow-optimized head. High mechanical resilience due to robust construction. Long service life. ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:R + B Filter GmbH based inLangenbrettach-Langenbeutingen, GERMANY
Filter Cartridges Ø 120, 160, 185 mm Conical: Compact dust collectors. Low upflow velocity in the system. Small interior space of the filter ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Premium
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
Provides in-line buffer storage and produce soak for the clean end of your line. Wyma’s Mini Wet Hopper (for buffer storage) is great when you need in-line buffer storage and produce soak at the clean end of your line. It can also be used for chemical application. Produce can be quickly tipped into the water-filled tank without fear of damage. Produce exits via an elevator. Elevator speed ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Metrohm AeRosol Sampler "MARS" is a simpler solution for aerosol monitoring. The MARS can be used as a preconditioning unit for various analytical applications under ambient conditions or in industrial environments. No sample storage is required. ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Hamilton RCX-30 - 150/4.6 is a column for separating monosaccharides, disaccharides, oligosaccharides and sugar alcohols. It is an anion exchange column based on polystyrene-divinylbenzene resin. The RCX-30 - 150/4.6 can be used for universal applications. The Hamilton RCX-30 - 150/4.6 separation column exhibits an outstanding separation of fructose and lactose. The column also offers the ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Gold micro electrode with a disk diameter of 300 µm. ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
This family of pH and conductivity meters are your ideal companion for routine use. You can use the instrument as a portable meter or as a benchtop instrument in the laboratory. Thanks to a large color display, a rugged design, and smart technology, these meters will make pH value and conductivity measurement as easy as never ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
The hunting-tooth profile of the NCS-720-S collector sprocket features an odd number of teeth at half the chain pitch, offering twice the life of full-tooth sprockets. The split design allows for use with full-width-span shafting and simplifies installation, while the integrally molded chain-saver rim decreases chain and sprocket ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
μStat 4000 is a portable Multi Potentiostat/Galvanostat that can be applied for Voltammetric, Amperometric or Potentiometric measurements, being able to perform up to 4 different independent measurements at the same time and including also a multichannel mode that allows you to work with up to 4 working electrodes sharing auxiliary and reference electrode. Li-ion Battery powered, it ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Autolab spectrophotometer kit UV/VIS consist of: UB spectrophotometer, light source, fiber cables and two type of DIO trigger ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Coulometer including generator electrode without diaphragm. Coulometry is the ideal method for water content determination in liquids, solids, and gases when it comes to water content determination in the trace range (10 µg to 10 mg absolute water). In addition, coulometry is an absolute method and thus no titer determination is necessary. Coulometric titrations are carried out easily and ...