Show results for
Refine by
Process Membrane Equipment Supplied In Denmark
22 equipment items found
Manufactured by:SANI Membranes A/S based inFarum, DENMARK
The Vibro-Lab3500 reduces the complexity of membrane filtration due to the patented Vibro technology and Free Flow Plates. The Vibro-Lab3500 is the ideal equipment for process development and membrane screening. The see-through housing makes it possible to observe the membrane area during process and cleaning. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Differential pressure transmitter with two diaphragm seals for differential pressure and level. The Deltabar FMD78 differential pressure transmitter with metal sensor uses two capillary diaphragm seals. Typically used in process and hygiene applications for continuous measurement of pressure differences in liquids, vapors, gases and dusts. The integrated HistoROM data module makes the management ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Digital pressure transmitter with fully welded diaphragm seal for measurement in gases or liquids. The Cerabar PMP75 digital pressure transmitter with metal diaphragm seal is typically used in process and hygiene applications for pressure, level, volume or mass measurement in liquids or gases. Suitable for high pressure as well as extreme process temperature applications from -70 up to +400°C ...
Manufactured by:Micronics, Inc. based inPortsmouth, NEW HAMPSHIRE (USA)
UPC offers a complete range of fabric filter bags for your dust collection system in a wide variety of fabrics, finishes, styles and ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Digital pressure transmitter with welded metal sensor for measurement in gases, steam or liquids. The Cerabar PMP71 digital pressure transmitter with metallic membrane is typically used in process applications for pressure, level, volume or mass measurement in liquids or gases. PMP71 is designed for high pressure applications up to 700bar. Quick Setup with freely ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Digital pressure transmitter with fully welded diaphragm seal for measurement in gases or liquids. The Cerabar PMP55 digital pressure transmitter with metal diaphragm seal is typically used in process and hygiene applications for pressure, level, volume or mass measurement in liquids. Suitable for high pressure as well as extreme process temperature applications from -70 up to +400°C (-94 to ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Compact pressure sensor with the Contite measuring cell for hydrostatic level measurement. The compact Deltapilot FMB50 transmitter with the condensate resistant Contite measuring cell is typically used in the process and hygienic applications. It is made for level measurement in liquid and paste-like media in open or closed containers and unaffected by possible foam formation. For use in SIL2 ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Differential pressure transmitter with one diaphragm seal for level measurement. The Deltabar FMD77 differential pressure transmitter with metal sensor uses a one-sided diaphragm seal or diaphragm seals on both sides with a capillary on the low pressure side. Typically used in the process industry for continuous level measurement in liquids. The integrated HistoROM data module makes the ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Pressure sensor with the Contite measuring cell for hydrostatic level measurement. The Deltapilot FMB51 is a rod version with a fixed process connection. This device with the Contite measuring cell and is typically used in the environmental industry. It is made for level measurement in liquid and paste-like media in open or closed containers and is unaffected by possible foam formation. For use ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Pressure sensor with Contite measuring cell for hydrostatic level measurement. The Deltapilot FMB53 is a cable version with mounting clamp. This device with the Contite measuring cell is typically used in the environmental industries. It is made for level measurement in liquid and paste-like media in open or closed containers and unaffected by possible foam formation. For use in SIL2 safety ...
Manufactured by:SANI Membranes A/S based inFarum, DENMARK
The Vibro-Lab35S improves process development of continuous microfiltration/ultrafiltration since the system is scalable to large industrial ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
The Cerabar PMC51 digital pressure transmitter with capacitive, oil-free ceramic measuring cell is typically used in process and hygienic applications for pressure, level, volume or mass measurement in liquids and gases. It guarantees high degree of system safety thanks to vacuum-proof ceramic membrane with integrated breakage detection. Quick Setup with ...
Manufactured by:Guldager A/S based inAllerød, DENMARK
Reverse osmosis – a professional solution. Guldager’s UniRo 401 T series is specially made for use in gastronomy and industry, where high standards of water quality and sufficient capacity are imposed. The system is designed specifically for glass and service dishwashers. However, due to the construction, it is also advantageous to install elsewhere where there is no need for a supply ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
The Cerabar PMC71 digital pressure transmitter with capacitive, oil-free ceramic measuring cell is typically used in the process and hygienic applications for pressure, level, volume or mass measurement in liquids and gases. It guarantees high degree of system safety thanks to vacuum-proof ceramic membrane with integrated breakage detection. Quick Setup with ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
The device for continuous gas density measurement in the process. Nanomass Gas Density is the first device for precise gas density measurement based on the revolutionary MEMS-Coriolis technology – a combination of innovative micro-technology and Endress+Hauser's long experience. For the first time, under economically attractive conditions parameters such as gas density or quality can be ...
Manufactured by:Biofuel Technology A/S based inEgå, DENMARK
The separation or refinement of stillage or digestate from bioenergy production is an important aspect of bioenergy production. Conventional bioethanol production is based on steam distillation of ethanol and subsequent evaporation of the stillage and production of distillers dried grains with solubles. The remaining water may partly be recycled to the process or disposed off to a wastewater ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Electronic differential pressure system utilizing two ceramic sensor modules and one transmitter. The electronic dp Deltabar FMD71 is a differential pressure system, used to measure the pressure or level, volume or mass of liquids in pressurized tanks or distillation columns/evaporators. The high pressure sensor (HP) measures the hydrostatic pressure. The low pressure sensor (LP) measures the ...
Manufactured by:Biofuel Technology A/S based inEgå, DENMARK
The BioFuel Technology ApS markets the CoMeTas A/S silicon carbide (SiC) membranes globally for any purpose. The BioFuel Technology ApS has received exclusive rights to use the CoMeTas A/S membranes in the BioFuel Technology ApS bioenergy plants and membrane refinement units within the bioenergy market involving an element of animal ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The 301 PID furnace controller has a large display mounted behind a smooth wipe-clean membrane and offers a single ramp to set point. It includes a 99 hour process timer which can be programmed for a timed delay at the start of the process or used as a countdown timer. ...
Manufactured by:In-Situ Process based inFort Collins, COLORADO (USA)
The OxyTechw² GAL Sensor has been designed to provide highly reliable Dissolved Oxygen measurements. The sensor employs the traditional galvanic principle. The rugged 100 micron, HDPE membrane has been selected to provide exceptional resistance to damage. This, combined with Oxyguard’s unique electrolyte and anode material provides long term stability of 3 years and longer without the ...