Show results for
Refine by
Applications
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Particle Measurement Instruments for Engine Emissions
- Particle Measurement Instruments for Non-Road Engine Emissions
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Air pollution, emission and process monitoring systems for power generation
Sample Heating Equipment Supplied In Denmark
73 equipment items found
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The LCPD BOX is a full extractive sampling probe assembly which extracts the sample gas through a probe & heated filter to remove particulates. To be used with heated analyzers, or with unheated analyzers such as MIR 9000, MIR 9000e, IR IS, by adding a cooling dryer ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers. Ideal for corrosive gases. (Plug & play sampling solution for: MIR FT, MIR 9000H, Graphite 52M, Topaze 32M,…). To be used with heated analyzers such as MIR FT, MIR 9000H, Graphite 52M, Topaze ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Fixed or mobile sample probes, stainless steel or PTFE lined, Protea is able to provide a solution to measurement from any sample point. With integrated sample filters of ceramic, PTFE, or microfiber construction these probes ensure that the sample passing to the analytical equipment is of sufficient quality to enable long life of ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea supplies heated sample lines of lengths 1m to 50m for the sampling of gaseous samples where sample temperature control is imperative. With dedicated integrated calibration lines and robust end fittings, these lines are suitable for fixed or mobile applications. Protea also supplies ATEX approved ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this also allows it to ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea’s in-house Temperature Control Unit (TCU) has been designed to allow simple use of heated sample lines and heated sample probes with Protea’s range of gas analyser. The controller unit contains PID control for accurate set-point of heated sampling equipment, such as at ...
Manufactured by:Signal Group UK Ltd based inCamberley, UNITED KINGDOM
A light duty, portable heated pump and pre-filter unit for use with single heated instruments. Provides variable inlet pressures and sample flow rates for very low sample pressures, or very long heated lines, or for pumpless measurement ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Can be operated with temperature controller DR- ...
Manufactured by:Signal Group UK Ltd based inCamberley, UNITED KINGDOM
A medium duty heated Prefilter unit is installed in the 19″ Rack housing of the analysers. The Prefilter is fitted with a choice of either one (361) or two (362) filter streams (for either two sample points, pre/post cat or twin cells). The units incorporate a heated head sample pump, gas distribution needle valve manifold, ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
The CyBio system for heating and orbital mixing of reagents is the fully automated solution for incubating and denaturation of substances in the temperature range from ambient to 99 °C. An optimum heat transfer is realized through specific plate adapters, furthermore the Edge Locking Mechanism (ELM) guarantees the repeatable and accurate positioning of ...
Manufactured by:AMETEK MOCON based inBrooklyn Park, MINNESOTA (USA)
The Baseline® 9000 H Heated Hydrocarbon Analyzer is a microprocessor based instrument designed for continuous ambient or process hydrocarbon gas measurement in environmental or industrial settings. The heated total hydrocarbon analyzer is configured for single point analysis (with or without a sample pump) of samples ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 885 Compact Oven Sample Changer is used for thermal sample preparation in Karl Fischer titration. In the oven the samples can be heated up to 250°C. The moisture contained in the sample evaporates and is transported by a dry carrier gas into the titration cell, where the analysis takes ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The Tekran Model 2030 Heated Cartridge Sampler allows gold coated sampling cartridges to be heated while they are exposed to a variety of gaseous sample matrices (i.e. ambient air, natural gas, or process gases). The performance of gold adsorbent cartridges is greatly enhanced if the cartridges are heated during ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Its robust design makes the NIRS DS2500 Polyol Analyzer resistant to dust, moisture, and vibrations, which means that it is highly suitable for use in harsh production environments. The NIRS DS2500 Polyol Analyzer covers the full spectral range from 400 to 2,500 nm, heats samples up to 80 °C, and delivers accurate results in less than one minute. The NIRS ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
Manufactured by:Aage Christensen A/S based inGlostrup, DENMARK
From Avestin we can offer homogenizers to be used primarily for research. These cover laboratory machines as well as homogenizers for pilot plants and small productions with capacities up to 1,000 ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 895 Professional PVC Thermomat determines the thermostability of polyvinyl chloride (PVC) and other chlorine-containing polymers by means of the dehydrochlorination test (DHC). This involves exposing the samples to elevated temperatures in the PVC Thermomat and measuring the stability time – the time until gaseous hydrogen chloride is released. The method is compliant with national and ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Developed and produced in accordance with Swiss quality standards, the OMNIS NIR Analyzer is the near-infrared spectroscopy (NIRS) solution for routine analysis along the entire production chain. Its application of the latest technologies and its integration in the modern OMNIS Software are reflected in its speed, operability and flexible utilization of this NIR ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
One single analyzer for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified. Based on the FTIR technology (Fourier Transform Infrared) for simultaneous measurement of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CH4, TOC, H2O, CO2, ...