Show results for
Refine by
Locations
- Europe
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia & Herzegovina
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Greece
- Hungary
- Iceland
- Ireland
- Italy
- Kosovo
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Macedonia
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- Northern Ireland
- Norway
- Poland
- Portugal
- Romania
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Turkey
- Ukraine
- United Kingdom
- Vatican City
Flare Stack Equipment Supplied In Europe
56 equipment items found
Manufactured by:Uniflare Ltd. based inKenilworth, UNITED KINGDOM
The UF10- VAB range of flares are specifically designed and used in conjunction with Parker SRS Siloxane removal plant. The unit is used to safely combust the re generation air from the Siloxane Plant and using the Uniflare Group combustion technology provides a system that uses a small amount of the gas to compliantly combust the vent air and meets emission ...
Manufactured by:Biogasmetano S.r.l. based inBrescia (BS), ITALY
BGM-BIOGASMETANO Flare Stack range include open flares (ground and elevated), as well as enclosed low and high temperature flares. All flares are characterized by simple end effective design, reliable equipment and ease of installation; operation is fully automatic. The high efficiency flares, ...
Manufactured by:Organics Group plc based inCoventry, UNITED KINGDOM
Shrouded flame flares with no visible flame and automated control of combustion air allowing a combustion temperature of 1,000ºC and 0.5 seconds retention ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
Open flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation. The EMR flares family includes units for biogas flows from 10 to 250 Nm3/hr and is characterized by compact dimensions, simplified design, ease of installation. The ST version is an elevated flare and is suitable where the flame outlet must be kept at ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
Enclosed flares HE and HTE type burn biogas in a cylindric enclosure fitted with a high-resistance fiberceramic insulation lining which ensures high combustion efficiency and limitation of both rumbling and radiation. Design of the burner and of the combustion chamber as well as the selection of construction material and ancillary equipment make these flares suitable for installation in projects ...
Manufactured by:Uniflare Ltd. based inKenilworth, UNITED KINGDOM
This range of equipment offers the customers either a long or short term solution to dealing with their waste gas. The UFO Range are all skid mounted for easy and rapid installation and can be easily moved around site for flaring surplus gas and carrying out pumping trials. They come in various sizes in terms of flow and range from 1 Nm3hr to 10,000 Nm3hr and are available for both long and short ...
Manufactured by:Uniflare Ltd. based inKenilworth, UNITED KINGDOM
The UF10 range of flares offer the customer a fully compliant solution to flaring of its Gas. These units have proven technology that meets the Environment Agency’s requirements in terms of emissions and are designed and procured to fully meet all requirements in terms of ATEX and DSEAR certification. The UF10 range comes in various standard ranges in terms of flow rate and starts at 10 ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
EMR ADV flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation but it is required that the flame is partially hidden and contained inside a combustion chamber. The multi-nozzle burner and the particular design, size and features of the combustion chamber allow the burning of biogas at a higher flow than in open ...
Manufactured by:Uniflare Ltd. based inKenilworth, UNITED KINGDOM
The UF10 Lean gas range of flares are specifically designed for the closed and declining in gas landfill sites. Uniflare’s unique burner design has 100% proven track record with emissions standards set out by the Environment Agency and their guidance on flaring LFGTN-05 these units offer a cost effective solution to controlling the landfill gas once at lower calorific values past site ...
Manufactured by:Uniflare Ltd. based inKenilworth, UNITED KINGDOM
The UFO-ENV range of flares are predominantly used on AD Plants and Waste Water Treatment Plants as emergency flares where the criteria for the flare is that it needs an invisible flame but does not need to meet emissions standards due to the hours of operation it would ever perform. Again Uniflare designs and manufactures these to our customers specification and using its unique combustion ...
Manufactured by:Uniflare Ltd. based inKenilworth, UNITED KINGDOM
The UFU10 range of flares and gas utilisation equipment are generally tailored to suit the customer’s application and specific requirements and offer seamless control of the gas between its utilisation application and the flare stack. These units come in various sizes from 10 Nm3hr through to over 10,000 Nm3hr if ...
Manufactured by:Uniflare Ltd. based inKenilworth, UNITED KINGDOM
This includes all the equipment and pipework required to connect from an AD Plant or Wastewater Treatment Plant digester outlet through to the CHP/Boiler/Gas Upgrader/Flare Stack inlet and also includes all the equipment required to both process and handle the gas, but also deliver it to its end source at the inlet conditions it requires. All the equipment is ...
Manufactured by:Automatic Flare Systems Limited (AFS) based inCoventry, UNITED KINGDOM
The High Temperature LO-CAL range of flares offers an optimum solution for safe and efficient degassing of old landfill sites or sites with low quality gas. The innovative Lo-Cal high temperature flare is designed to provide greater gas control during the latter phases of a site. Low calorific gas high temperature combustion is necessary on more and more sites due to increased aftercare ...
Manufactured by:Advanced Energy Industries, Inc. based inDenver, COLORADO (USA)
Advanced Energy's FlareSpection system provides pilot flame monitoring for applications with multiple flare tips. You can confirm flare operation remotely and detect differences in flare stack heat signatures. Continuous, remote, and automatic monitoring of pilot flames and flared gases. High resolution 640 x 480 ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
HT-E series consist of enclosed ground flares specifically developed for installation in biomass plants where biogas combustion at full-flow is not expected to be required continuously, instead only occasionally when, for instance, engines are being serviced. Combustion occurs inside the cylindrical chamber under a controlled environment, where air is admitted through a damper. ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a controlled environment. Air flow is ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
The T flare is a self-supported elevated flare (open type) complete with a safety ladder and an upper platform that allow access to the nozzle and ignition and flame control equipment. The flame shield is designed to prevent accidental flame extinguishing and provides a chamber lined with fiberceramic for more complete biogas combustion. The ...
Premium
Manufactured by:Optical Scientific Inc. (OSi) based inGaithersburg, MARYLAND (USA)
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a ...
Premium
Manufactured by:Mantec Technical Ceramics Ltd based inStoke-on-Trent, UNITED KINGDOM
The demands on safety and environmental concern in many of today’s industries are leading to a wider use of flame arrestor vents. These can work in two directions by preventing a flame from entering or leaving a hazardous ...
Premium
Manufactured by:Environics, Inc. based inTolland, CONNECTICUT (USA)
Silicon surface treatment of the gas path eliminates surface adsorption of active compounds like sulfurs, H2S, ammonia and mercury on stainless steel surfaces. Also know as Silcosteel®/Sulfinert® or SilcoNert 1000/2000, coating the gas path also improved efficiency, reduces moisture contamination and prolongs unit life. A coating is often used in combination with a heated flow path and/or ...