Show results for
Refine by
Flare Stack Equipment Supplied In Spain
22 equipment items found
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
Open flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation. The EMR flares family includes units for biogas flows from 10 to 250 Nm3/hr and is characterized by compact dimensions, simplified design, ease of installation. The ST version is an elevated flare and is suitable where the flame outlet must be kept at ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
Enclosed flares HE and HTE type burn biogas in a cylindric enclosure fitted with a high-resistance fiberceramic insulation lining which ensures high combustion efficiency and limitation of both rumbling and radiation. Design of the burner and of the combustion chamber as well as the selection of construction material and ancillary equipment make these flares suitable for installation in projects ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
EMR ADV flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation but it is required that the flame is partially hidden and contained inside a combustion chamber. The multi-nozzle burner and the particular design, size and features of the combustion chamber allow the burning of biogas at a higher flow than in open ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
HT-E series consist of enclosed ground flares specifically developed for installation in biomass plants where biogas combustion at full-flow is not expected to be required continuously, instead only occasionally when, for instance, engines are being serviced. Combustion occurs inside the cylindrical chamber under a controlled environment, where air is admitted through a damper. ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a controlled environment. Air flow is ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
The T flare is a self-supported elevated flare (open type) complete with a safety ladder and an upper platform that allow access to the nozzle and ignition and flame control equipment. The flame shield is designed to prevent accidental flame extinguishing and provides a chamber lined with fiberceramic for more complete biogas combustion. The ...
Premium
Manufactured by:LAND® based inDronfield, UNITED KINGDOM
The LWIR-640 long-wavelength thermal imagers build on more than 20 years of thermal imaging experience, expanding the market-leading range of LAND temperature measurement solutions. They offer a full temperature measurement range of -20 to 1000 °C (-4 to 1832 °F) in three ranges with a choice of different optics and ...
Manufactured by:VisionTIR based inMalaga, SPAIN
ThermalEye is a modular and flexible temperature monitoring system based in radiometric infrared cameras. The system is able to capture the temperature distribution of a surface in milliseconds with automatic detection of hot and cold ...
Premium
Manufactured by:Environics, Inc. based inTolland, CONNECTICUT (USA)
Silicon surface treatment of the gas path eliminates surface adsorption of active compounds like sulfurs, H2S, ammonia and mercury on stainless steel surfaces. Also know as Silcosteel®/Sulfinert® or SilcoNert 1000/2000, coating the gas path also improved efficiency, reduces moisture contamination and prolongs unit life. A coating is often used in combination with a heated flow path and/or ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. These droplets must be removed in ...
Manufactured by:PROGECO is a brand of CONVECO Srl based inCastrezzato (BS), ITALY
Applications include: end-of-line flame arresters fitted to anaerobic digester tanks and gas holders to provide protection against external ignition sources; deflagration or detonation arresters located at or near combustion burners and flare stacks. Flame arresters supplied by PROGECO are ATEX ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The FFG is easily adaptable to any ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
We design Enclosed ground flares when waste gases are requested to be flared in an enclosed stack, with reduced flame visibility, minimal heat and noise, emissions sampling, ease, and smokeless combustion, in sensitive areas. The stack is internally refractory lined, designed for low and medium flows, has high destruction ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Sentinel flame monitor reliably provides remote flame detection up to 550 feet away, durability, ease of maintenance and rapid response time. If the monitor detects the absence of a flame for an adjustable amount of time, a set of dry form C contacts are activated and the pilot re-ignition system is set into motion. Response times are markedly quicker than those of a standard thermocouple ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The liquid seal drum is a specially designed vessel containing a predetermined level of water in the base of the drum. The main purpose of the liquid seal drum is to stop flame propagation in the unlikely event of flashback. The liquid seal also acts as a large check valve so that gas can not travel upstream for any reason. A third function of the liquid seal is to disentrain liquid droplets. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 245 Fuel Efficient Flare Pilot is a high alloy, stainless steel pilot composed of fuel gas line, ignition line, inspirator and optional thermocouple. The pilot head assembly includes a 310 stainless steel flame retention nozzle and wind shroud for extended service life capable of sustaining a stable flame in winds of up to 150 mph. Fuel gas passes through an inspirator at the base of ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
Manufactured by:Servomex - a Spectris Company based inSugar Land, TEXAS (USA)
Leading-edge, safety-enhanced oxygen analysis for hazardous or challenging applications. The award-winning Oxy 1900 sets the standard for O2 gas analysis, delivering a feature-rich solution designed to meet the monitoring needs of even the most challenging applications. At the heart of the Oxy 1900 is Servomex patent Paramagnetic oxygen sensor. Providing highly reliable, accurate and stable ...
Manufactured by:Ameritrol Inc. based inVista, CALIFORNIA (USA)
The FX series flow switch is the most reliable flow switch available. The thermal dispersion principle of operation features no moving parts and provides an extremely reliable and repeatable switch for the most demanding industrial applications. The sensor head employs two temperature sensors with a constant very low power heating source physically attached to one of the temperature sensors. The ...
Manufactured by:Ameritrol Inc. based inVista, CALIFORNIA (USA)
The LX series level switch is the most versatile instrument ever designed for level control. One unit can be field calibrated to detect the interface of air/foam, foam/liquid, oil/emulsion, emulsion/water, oil/water, and a solid in a ...