Show results for
Refine by
Applications
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Particle Measurement Instruments for Engine Emissions
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Process analyzers & instruments for continuous emissions monitoring
- Particle Measurement Instruments for Non-Road Engine Emissions
- Stack emissions monitoring
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Measurement solution for WID Emissions Monitoring
- Measurement solution for QAL2 EN 14181
- Industrial monitoring solutions for the gas analysers areas
- Fire detection solutions for the power stations sector
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for sulfur pit gas
- Process analyzers & instruments for tail gas treating unit (TGTU)
- Process analyzers & instruments for NOx emissions
Sampling Probe Equipment Supplied In Greece
71 equipment items found
Premium
Manufactured by:Umwelttechnik MCZ GmbH based inBad Nauheim, GERMANY
Mobile calibration system as transfer standard to determine the correction values for losses along the sampling ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Fixed or mobile sample probes, stainless steel or PTFE lined, Protea is able to provide a solution to measurement from any sample point. With integrated sample filters of ceramic, PTFE, or microfiber construction these probes ensure that the sample passing to the analytical equipment is of ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
For measurement of gases that do not require hot measurements, Protea can supply sample probes of various material construction. This includes probes made of materials such as PEEK allowing for measurement of possible corrosive ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The CP5 is a modern version of the classic unheated cold sample probe for the isokinetic sampling of particulate matter in stack emissions. The CP5 design and construction follow the philosophy of being easy and practical to use on the stack. The CP5 is fully realized in AISI316 and is supplied including the AISI316 inner tube, thermocouple and ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Set incl. 11 pcs stainless steel sampling probes (3,45- 3,81-4,16-4,57-5,0-5,46-5,92-6,71-7,62-8,69-9,9 mm). Sampling probes can be directly connected into SAC-65 sampling cyclone inlet (R3/8") or IPR-500. Set includes also 11 pcs Cu gaskets 17/21x1.5 ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The Tekran Model 3443 is a customized version of an JCT Dilution Probe (Model JES-301). JCT probes are well-known for their dependability and ease of servicing. The probe incorporates a non-corrosive heated, replaceable Teflon filter element. The filter element is mounted in an electrically heated stainless steel housing covered by a thermal isolated weather protection enclosure. Temperature ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration gas. Both types of air should be dry, oil free and ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
This heated zone is critical to ensure quantitative transfer of mercury species to the 3400 system while maintaining the same speciated mercury fractions that are present at the sample probe ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The Tekrarr Model 1308 Recirculating Water Purification System is an inexpensive, convenient source of deionized, mercury-free water for the Series 3300Xi Mercury CEM. The system has two stages of pre-filtration to eliminate all particulate and organic contamination in the water. A reverse osmosis (R/O) unit then removes the bulk of ionic material. Two stages of finishing ion exchange (IX) resin ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The Tekran Model 3425 Elemental & Oxidized Mercury Calibrator provides NIST traceable calibration gas for system calibration. The 3425 is an added, programmable calibration gas source that complements the standard calibration gas source already installed inside the 3400 HgCEMS, necessary to comply with USEPA and other government ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The Tekran Model 3400-AIR Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Tekran Series 3400 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and calibration functions. Both types of air should be dry, oil free and particulate ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Can be operated with temperature controller DR- ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The Tekran Model 3400-WTR Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Tekran 3400 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long life. The Model 1306 can supply enough water for up to four CEM systems. The filter ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
Tekran manufactures CVAFS mercury analytical systems for a wide range of industrial applications including coal-fired power plants, cement manufacturing, steel production, and incineration applications. The Tekran Mercury CEM (HgCEM) Systems are currently operating at over 130 sources to comply with strict US EPA regulations. In addition, there are numerous installations in Asia and Europe. For ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The LCPD BOX is a full extractive sampling probe assembly which extracts the sample gas through a probe & heated filter to remove particulates. To be used with heated analyzers, or with unheated analyzers such as MIR 9000, MIR 9000e, IR IS, by adding a cooling dryer ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman® Prime 785S is a low-noise, high-throughput, and fully integrated Raman system with an embedded tablet computer and a fiber-optic sampling probe. Using a high-quantum-efficiency CCD array detector with TE deep cooling (-25 °C) and high dynamic range, this portable Raman spectrometer delivers research-grade Raman analysis capabilities, ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman Duo is a dual-laser Raman system that captures a wide spectral range with one spectrometer and sampling probe. It uses a 1064 nm laser to measure the fingerprint region (100–2500 cm⁻¹), providing accurate chemical details while reducing fluorescence interference. Additionally, an 860 nm laser covers the stretch region (2500 - 4600 ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman® Pro 785S is a fully integrated Raman system with an embedded tablet computer and a fiber-optic sampling probe, offering users high-sensitivity, high-resolution, research-grade, portable Raman analyses. Using a high-quantum-efficiency CCD array detector with TE deep cooling and high dynamic range, the portable i-Raman® Pro system delivers ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman® Pro 785H is a fully integrated Raman system with an embedded tablet computer and a light-guide sampling probe, offering users high-sensitivity, high-resolution, research-grade, portable Raman analyses. Using a high-quantum-efficiency CCD array detector with TE deep cooling and high dynamic range, the portable i-Raman® Pro system delivers ...