- Home
- ivory coast
- Equipment
Refine by
Xprt Equipment Supplied In Ivory Coast
409 equipment items found
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For the production of small quantities (insular production) we offer high performance stand alone units. Stand-alone unit with integrated gas monitoring system for venting, evacuation of air, SF6 filling or recovery of gas compartments. Error-proof operation via 7" touch panel. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For adsorption of moisture, solid and gaseous decomposition ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For determination of moisture Moisture is the most important criteria for the determination of the gas quality. This device has been designed specially for SF6 moisture measurements. It also shows a higher resistance against contamination and SF6 decomposition products than conventional moisture sensors and even minimises the usual long-time drifting. The integrated electronic flow meter supports ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Density monitors can be verified directly at the gas compartment or disassembled for external tests without having to recover the gas from switchgear by means of these lock valves. The valve securely separates the assembled density monitor from the gas compartment. In combination with the Densi- Control IN (B178R51) density monitor testing device it is also possible to quickly and easily verify ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The H2 filling station enables the refueling of gaseous hydrogen from up to 4 different H2 storage tanks (cylinder bundles). The filling process is simple and uncomplicated, it can be started quickly and runs automatically. Depending on the pre-pressure in the H2 storage tanks, a vehicle can be refueled up to a maximum of 300 bar. Gas type: H2. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Technical data: Dimensions: Length 435 mm, Width 270 mm, Height 370 mm. Weight: 29 kg. Standard equipment: Vacuum pump for evacuation of air 16 m³/h (at 50 Hz) and 19 m³/h (at 60 Hz), final vacuum < 1 mbar. DILO couplings DN20. Ball valve or solenoid valve DN20. Digital vacuum indication (0 - 400 mbar). 3 m long electrical connecting cable. Operating ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For efficient handling of SF6/N2/CF4 gas mixtures. For this special application we supply different high performance devices. Thus efficient handling of large volume GIL lines is no ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Density monitors can be verified directly at the gas compartment or disassembled for external tests without having to recover the gas from switchgear by means of these lock valves. The valve securely separates the assembled density monitor from the gas compartment. In combination with the Densi-Control IN (B178R51) density monitor testing device it is also possible to quickly and easily verify ...
Manufactured by:Side Industrie based inVillemer, FRANCE
Engine with cage three-phase 50Hz normalized - Classify F - IP67 as standard. Hydraulics with effect Whirlpool. Strong capacity of inhalation. Consequent complete passage from 70 mm to 150 mm admitting a important mixture gas / liquid. Volute in matrixed stainless steel thickness minimum 4 ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Level measurement in liquids for water & wastewater and utilities in all industries. Micropilot FMR20 offers continuous non-contact level and flow (via linearization table) measurement and is a perfect application fit for the water & wastewater industry and utilities across all industries. Commissioning is possible via HART or wireless via app using Bluetooth® or with remote display. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Toroidal conductivity measuring system for hygienic and sterile applications. Smartec CLD134 is a measuring system for inductive conductivity in the food & beverage and life sciences industries. The combination of a transmitter and a sensor is interference-free and especially easy-to-use. It meets the highest hygienic and sterile demands thanks to its food-grade virgin PEEK body, its ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Self-cleaning crossflow filter for pressurized pipe sampling. Stamoclean CAT411 provides bacteria-free micro filtration of samples from pressure pipes. Its self-cleaning crossflow filter avoids filter blocking, thus increasing your process safety. Thanks to a minimized dead volume, it reflects changes of your process promptly and shortens the response time of your downstream measuring devices. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 8m. The Prosonic FMU41 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 10m. The Prosonic FMU42 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 15m. The Prosonic FMU43 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 20m. The Prosonic FMU44 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Ultrasonic sensor for level measurement for connection to FMU9x (measuring range up to 45m). The FDU95 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of powdery to coarse bulk materials. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Suited for explosion ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Point level switch for liquids in
high-temperature applications. Liquiphant FT70 is a point level switch for use in hazardous areas with all international certificates. FTL70 is especially designed for applications with high process temperatures up to 280°C and can be used for Safety Instrumented Systems up to SIL2, in homogeneous redundancy up to SIL3. An integrated second line of ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Digital pressure transmitter with fully welded diaphragm seal for measurement in gases or liquids. The Cerabar PMP75 digital pressure transmitter with metal diaphragm seal is typically used in process and hygiene applications for pressure, level, volume or mass measurement in liquids or gases. Suitable for high pressure as well as extreme process temperature applications from -70 up to +400°C ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
For tank side monitoring and controlling of Proservo NMS5 intelligent tank gauge. The Promonitor NRF560 is a monitoring unit for use with the Proservo series of tank gauges. Mounted at the tank side or up to 1,200 meters away (local HART connection). Promonitor provides indication of measured level, temperature data and operating status, and can send operating commands to the Proservo NMS5 from a ...