- Home
- ivory coast
- Equipment
Refine by
Xprt Equipment Supplied In Ivory Coast
409 equipment items found
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For adsorption of gaseous and dusty decomposition products in large gas compartments. B148R03: Mobile pre-filter unit DN20 (pe 16 bar). B148R04: Mobile pre-filter unit DN40 (pe 16 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This bag is a simple and cost-e?ffective system for collecting measuring gas in case it cannot or is not desired to returned. Its handling is very easy: Connect the bag with the hose included in the scope of supply to the measuring device. The discharge gas collecting bag allows collecting the gas from up to 42 liter. The gas can be removed from the discharge gas collecting bag with any service ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The H2 filling station enables the refueling of gaseous hydrogen from up to 4 different H2 storage tanks (cylinder bundles). The filling process is simple and uncomplicated, it can be started quickly and runs automatically. Depending on the pre-pressure in the H2 storage tanks, a vehicle can be refueled up to a maximum of 300 bar. Gas type: H2. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Starter series for medium-sized gas compartments The service carts of the Compact series for gaseous or liquid storage offer the best entry into professional gas handling. Equipped with the well-proven DILO components these service carts allow the recovery, filling and purification of SF6 gas as well as the evacuation of air and venting of medium-sized gas compartments. Depending on the device ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The unique combination of mass flow meter and fi lling device facilitates the SF6 gas monitoring considerably. This device does not only enable the registration of the quantities filled in, but allows the automatic filling of a gas compartment at the same time. Thus the operator can select the indication of the gas quantity required or the preset filling value. After having pressed the start key, ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For adsorption of moisture, solid and gaseous decomposition ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The Mirror-Analyser SF6 uses the physical dew point mirror measuring principle which is characterised by its high precision and utmost reliability in order to measure the moisture content. By cooling the integrated mirror the moisture content of the gas is determined by measuring the temperature depending on the condensation or icing of the mirror. The other parameters of SF6 quality are ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
These tanks offer sufficient volume to store or withdraw even large gas quantities in gaseous or liquid form – special feature of this type series: for withdrawal of liquid gas, the entire gas content can be withdrawn all at once without having to heat the tank. The tanks are equipped with digital weighing scales. These weighing scales enable to determine the filling weight with an accuracy ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Density monitors can be verified directly at the gas compartment or disassembled for external tests without having to recover the gas from switchgear by means of these lock valves. The valve securely separates the assembled density monitor from the gas compartment. In combination with the Densi- Control IN (B178R51) density monitor testing device it is also possible to quickly and easily verify ...
Manufactured by:Side Industrie based inVillemer, FRANCE
Engine with cage three-phase 50Hz normalized - Classify F - IP67 as standard. Hydraulics with effect Whirlpool. Strong capacity of inhalation. Consequent complete passage from 70 mm to 150 mm admitting a important mixture gas / liquid. Volute in matrixed stainless steel thickness minimum 4 ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Level measurement in liquids for water & wastewater and utilities in all industries. Micropilot FMR20 offers continuous non-contact level and flow (via linearization table) measurement and is a perfect application fit for the water & wastewater industry and utilities across all industries. Commissioning is possible via HART or wireless via app using Bluetooth® or with remote display. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Toroidal conductivity measuring system for hygienic and sterile applications. Smartec CLD134 is a measuring system for inductive conductivity in the food & beverage and life sciences industries. The combination of a transmitter and a sensor is interference-free and especially easy-to-use. It meets the highest hygienic and sterile demands thanks to its food-grade virgin PEEK body, its ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Self-cleaning crossflow filter for pressurized pipe sampling. Stamoclean CAT411 provides bacteria-free micro filtration of samples from pressure pipes. Its self-cleaning crossflow filter avoids filter blocking, thus increasing your process safety. Thanks to a minimized dead volume, it reflects changes of your process promptly and shortens the response time of your downstream measuring devices. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 8m. The Prosonic FMU41 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 10m. The Prosonic FMU42 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 15m. The Prosonic FMU43 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 20m. The Prosonic FMU44 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Ultrasonic sensor for level measurement for connection to FMU9x (measuring range up to 45m). The FDU95 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of powdery to coarse bulk materials. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Suited for explosion ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Point level switch for liquids in
high-temperature applications. Liquiphant FT70 is a point level switch for use in hazardous areas with all international certificates. FTL70 is especially designed for applications with high process temperatures up to 280°C and can be used for Safety Instrumented Systems up to SIL2, in homogeneous redundancy up to SIL3. An integrated second line of ...