- Home
- ivory coast
- Equipment
Refine by
Xprt Equipment Supplied In Ivory Coast
409 equipment items found
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Service carts for small gas compartments The service carts of the Mini Series for liquid gas storage meet all requirements for efficient gas handling in the medium voltage range and thus, allow gas recovery down to < 5 mbar. Equipped with the well-proven DILO components these service carts enable the recovery, filling and purification of SF6 gas as well as the evacuation of small gas ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The fl exible K176R21 / R31 / R32 routers allow remote access to the connected DILO device via the Internet. The router is protected in the transport case and can be magnetically attached to a wide variety of devices with just a few simple steps. The Internet connection is possible via LAN or mobile network. Error analysis, operation or software adaptation of the connected devices can thus be ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This model range has been specially developed for liquid storage and the emission-free recovery of gas mixtures down to a final vacuum of 1 mbar based on C4-FN and its specific requirements. The maximum storage pressure is 150 bar (pe). The recovered gas quantity can be determined accurately by means of the integrated digital scales. Modern control technology in conjunction with a user-friendly ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The MINI SERIES C4/C5 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially designed for the handling of gas mixtures based on 3M Novec 4710 or 3M Novec 5110. The working pressures allow gaseous storage in order to prevent demixing. Thus, filling of the gas mixture from the gas compartment into a transport cylinder as well ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Density monitors can be verified directly at the gas compartment or disassembled for external tests without having to recover the gas from switchgear by means of these lock valves. The valve securely separates the assembled density monitor from the gas compartment. In combination with the Densi- Control IN (B178R51) density monitor testing device it is also possible to quickly and easily verify ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
We also deliver custom-tailored solutions for the SF6 gas handling of electron accelerators. Compared to the "normal" gas handling in the energy sector, larger SF6 gas volumes – usually several tons – have to be handled in the field of electron accelerators. Therefore, high-performance system components as well as large supply lines (up to DN 100) are needed, so that the gas volume ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For safe refilling of SF6 gas into gas compartments by overpressure The handy device allows filling of electrical equipment with SF6 gas directly from the cylinder by overpressure. The primary gauge of the pressure reducer displays the cylinder pressure in bar, psi and kPa. The secondary gauge indicates the desired filling pressure to be set easily by means of the handle. The cylinder pressure ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Vacuum testing of smaller components (without gas handling): This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For the economic recovery of xenon from production plants. Special features/Process: Evacuation of the customer's test chamber. Filling of the chamber with xenon. After successful testing inside the chamber, the gas is recovered and stored into cylinders. Permanent monitoring of the gas quality by means of an O2 sensor. Reuse of the recovered gas if the gas quality complies with the ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The service carts of the G057R01 ECONOMY series have been specially designed for gaseous and liquid storage of gas mixtures for the complete gas handling of Alternative Insulating Gases. With the device series for gas mixtures with C4-FN, DILO sets highest priorities to zero emissions. This allows the complete gas handling of Alternative Insulating Gases to be carried out efficiently and safely on ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Finest hairline cracks may occur on porcelain insulators for circuit breakers or other SF6 insulated electrical equipment such as measuring or current transformers during transportation or as a result of material stress. Filling the gas compartment with SF6 may lead to dangerous bursting of the insulator. Thanks to the "CommGuard Web" filling unit it is now possible, for the very first time, to ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This series for liquid gas storage not only captivates with its compact construction and modern design, but also combines state-of-the-art technology with ergonomics. Modern control technology in conjunction with a user-friendly interface in several languages make device operation simple and convenient. Operation via mobile devices such as smartphones, tablets or laptops is available as an ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This device covers two important functions: The integrated vacuum pump allows the evacuation of air down to < 1 mbar so that no air/gas mixture is produced during the subsequent filling process. The use of gastight and selfclosing DILO couplings guarantees handling without gas ...
Manufactured by:Side Industrie based inVillemer, FRANCE
Engine with cage three-phase 50Hz normalized - Classify F - IP67 as standard. Hydraulics with effect Whirlpool. Strong capacity of inhalation. Consequent complete passage from 70 mm to 150 mm admitting a important mixture gas / liquid. Volute in matrixed stainless steel thickness minimum 4 ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Level measurement in liquids for water & wastewater and utilities in all industries. Micropilot FMR20 offers continuous non-contact level and flow (via linearization table) measurement and is a perfect application fit for the water & wastewater industry and utilities across all industries. Commissioning is possible via HART or wireless via app using Bluetooth® or with remote display. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Toroidal conductivity measuring system for hygienic and sterile applications. Smartec CLD134 is a measuring system for inductive conductivity in the food & beverage and life sciences industries. The combination of a transmitter and a sensor is interference-free and especially easy-to-use. It meets the highest hygienic and sterile demands thanks to its food-grade virgin PEEK body, its ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Self-cleaning crossflow filter for pressurized pipe sampling. Stamoclean CAT411 provides bacteria-free micro filtration of samples from pressure pipes. Its self-cleaning crossflow filter avoids filter blocking, thus increasing your process safety. Thanks to a minimized dead volume, it reflects changes of your process promptly and shortens the response time of your downstream measuring devices. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 8m. The Prosonic FMU41 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 10m. The Prosonic FMU42 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...