Show results for
Refine by
Applications
- Particle Measurement Instruments for Engine Emissions
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Environmental Data Monitoring Solutions for Environment
- Environmental Data Monitoring Solutions for Indoor Air Quality
- Environmental Data Monitoring Solutions for Industrial Hygiene
- Environmental Data Monitoring Solutions for Air Quality and Emission
- Environmental data monitoring solutions for Research
- Environmental Data Monitoring Solutions for Controlled Atmosphere
Accelerometer Equipment Supplied In Japan
58 equipment items found
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
Larson Davis offers a selected range of measurement accelerometers optimized for use with the HVM200 Human Vibration Monitor. They cover the complete range of applications including Hand-arm, Whole-body, and Glove Transmissibility ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
Designed to operate continuously at 180°C (356°F) to meet the toughest environmental requirements, the wide 0.3Hz to 10 kHz frequency range and low weight of Triaxial CCLD Accelerometer Types 4527 and 4527-001 make them equally suitable for use as general purpose accelerometers. When only a single- or dual-axis measurement is needed, these ...
Manufactured by:DEWESoft based inTrbovlje, SLOVENIA
Single axis, triaxial accelerometers and impulse hammers for vibration measurement and structural modal analysis. Angle sensors are perfect complementary sensors for applications like order tracking. ...
Manufactured by:RION Co., Ltd. based inTokyo, JAPAN
Condenser microphone has excellent features, in its frequency response, stability and so on. Therefore, it is mainly used for ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-73 sensor package is a true electro-mechanical triaxial downhole accelerometer designed for broadband earthquake monitoring and applications requiring highly sensitive and rugged sensors with minimum maintenance and a simple method for periodic ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-73-DH sensor package is a true electro-mechanical triaxial downhole accelerometer designed for broadband earthquake monitoring and applications requiring highly sensitive and rugged sensors with minimum maintenance and a simple method for periodic testing. The rugged mass suspension moving coil system improves the signal to noise ratio. The magnetic system and capacitive ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-43 sensor package is a triaxial accelerometer designed for urban and industrial applications regarding strong motion earthquake survey and vibration monitoring as well as alarm and switch systems. All these applications require rugged sensors with minimum maintenance and a simple method for periodic ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-23 package is a triaxial accelerometer sensor designed for Strong Motion and industrial applications where a high sensitivity is required. The AC-2x series are state-of-the-art servo-accelerometers based on standard exploration geophone mass-spring system with electronic feedback. ...
Manufactured by:Solar MEMS Technologies S.L. based inLa Rinconada (Sevilla), SPAIN
MASS sensor includes one accelerometer, one magnetometer, and one sun sensor to measure angle of sun-ray, DNI solar radiation and azimuth and elevation position of the device. This information is very useful to develop solar tracking controllers, with no other devices. ...
Manufactured by:RION Co., Ltd. based inTokyo, JAPAN
An analogue output for each channel is provided on the rear panel for voltage output to a later stage measuring instrument or data logger. This amplifier is ideal for properly amplifying accelerometer signals and for logging with good SN. ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
Suitable for a wide variety of vibration measurement applications using one of a range of accelerometers - dependent on the level, position and environment in which the measurements are to be ...
Manufactured by:Ono Sokki Technology, Inc. based inAddison, ILLINOIS (USA)
Selection from 5 kinds of measurement modes allows it to calculate and display rotation speed of any complex waveform signals from a sound level meter or an accelerometer accurately by extracting the exact frequency component. ...
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
Provides microphone polarization voltage, adjustable gain and filtering (A-weight, C-weight, or band-pass). Can also be used with ICP and charge-coupled accelerometers with the appropriate accessories. Automated sequential multi-channel sound and vibration measurements using a single or dual channel analyzer under PC control via RS232 interface. One example is the measurement of ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
This high-quality compact machine with a permanent magnetic field is designed for long, trouble-free operation with relatively heavy loads to be excited to high g levels. Type 4808 will normally be driven by Power Amplifier Type 2719 rated at 180VA, but can also be driven by any amplifier up to a maximum input current of 15A RMS without assisted cooling. ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
Vibration Exciter Type 4809 is a small and versatile instrument with an impressive performance designed to ensure long term constructional reliability. Type 4809 will normally be driven by Power Amplifier Type 2718 rated at 75 VA, but can also be driven by any small power amplifier up to a maximum input current of 5 A and a sufficient voltage rating without assisted cooling. ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
An electrodynamic mini-shaker with a permanent magnetic field designed for motive force generator in mechanical impedance measurements where only smaller forces are required. Type 4810 is optimised to obtain full output force when used with Power Amplifier Type 2718. ...
Manufactured by:Tokyo Gas Engineering Solutions Corporation based inKaigan, Minato-ku, JAPAN
Using the SES70 Intelligent Earthquake Sensor, the amount of damage caused by earthquake motion can be estimated. Additionally, this unit makes a judgment regarding ground liquefaction based on the acceleration waveform characteristics, and outputs the ...
Manufactured by:DEWESoft based inTrbovlje, SLOVENIA
TEDS equipped adapters that turn any of our DSUB9 universal analog input into direct IEPE, charge, thermocouple, shunt, voltage, LVDT or RTD ...
Manufactured by:RION Co., Ltd. based inTokyo, JAPAN
Supports various measurements. No more long cables. No more wiring installation! We can propose the most suitable measurement you ...
Manufactured by:TOKYO KEIKI INC. based inTokyo, JAPAN
The Position and Attitude Sensor VSAS-T1G by TOKYO KEIKI is a sophisticated device designed for inertial navigation applications. This sensor leverages advanced technology to deliver accurate positioning and attitude data, critical for navigation and stabilization tasks. It integrates a vibrating silicon-gyro, enhancing the sensor's ability to detect motion changes with high precision. Often ...