Refine by
Applications
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Municipal Water & Utilities
- Water monitoring instruments for surface water monitoring
- Air pollution, emission and process monitoring systems for agriculture
- Air pollution, emission and process monitoring systems for metals
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Tanks & Vessels
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Air pollution, emission and process monitoring systems for minerals
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Oil & Gas Energy
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Offshore Platforms
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Power Generation
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Wind Turbines
- Environmental solutions for the refining and petrochemical industry
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- Water monitoring instruments for groundwater monitoring
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Environmental solutions for the pharmaceutical industry
- Air pollution, emission and process monitoring systems for food & pharma
- Environmental solutions for the chemical processing industry
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Environmental solutions for the food and beverage industry
- Air pollution, emission and process monitoring systems for power generation
- Absolute separation for the food and beverage sector
- Absolute separation for the energy sector
- Absolute separation for the environment sector
- Absolute separation for the recycling sector
- Air pollution, emission and process monitoring systems for chemicals
- Environmental solutions for the pulp and paper industry
- Incinerator solutions for the abattoir / slaughterhouse waste sector
- Incinerator solutions for the farm sector
- Li-ion battery electrode manufacturing
- Environmental solutions for the printing and packaging industry
- Air pollution, emission and process monitoring systems for incineration
- Chromatography laboratory instrumentation for chemical industry
- Environmental solutions for the metals and mining industry
- Air pollution, emission and process monitoring systems for leakage detection
- Environmental solutions for the automotive industry - industrial painting and other finishing applications
- Environmental solutions for the waste incineration industry
- Industrial waste solutions for compound feed industry
- Asphalt production - monitoring solutions for process optimization & energy saving
- Environmental solutions for the cement manufacturing industry
- Environmental solutions for the composites and carbon fiber industry
- Surface water quality testing for the environmental monitoring industry
- Chromatography laboratory instrumentation for food & beverage industry
- Water monitoring instruments for water quality monitoring
- Air pollution, emission and process monitoring systems for laboratory
- Underwater cleaning solutions for industry sector
- Ultra High Temperature Solar Technology for Green Hydrogen Energy Production
- Solutions for Environmental
- Environmental solutions for the iron and steel industry
- Chromatography laboratory instrumentation for pharmaceutical industry
- Industrial waste solutions for chemical industry
- Irrigation solutions for Apple Crops
- Soil moisture monitoring solution for soil science industry
- Air pollution, emission and process monitoring systems for natural gas
- On-line gas, particulate analyzers, flow monitors, data acquisition for construction materials industry
- Soil moisture monitoring solution for plant science sector
- AMANDUS KAHL Pelleting plants for Feed industry
- Pelleting plants for Recycling industry
- Air pollution, emission and process monitoring systems for odor detection
- Gas Turbine Generator for Oil & Gas Solution
- Gas Turbine Generator for Industrial & Commercial Solution
- Gas Turbine Generator for Waste to Energy Solution
- Gas Turbine Generator for Marine
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Solutions for Functional Additives
Xprt Equipment Supplied In Morocco
2,278 equipment items found
Showcase
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Strip Series B340 strips simple stranded wires and multiconductor cables with a cross section from 0.013 to 16 mm² (36 – 5 AWG) and a diameter of up to 9 mm (0.35”). The programmable Strip Series B340 features four rotary X-shaped blades, capable of processing cables with thin jacketing and demanding materials like Kapton, Teflon®, or textile glass braiding. It offers a ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
Showcase
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Cut & Strip Family E400 processes wire, tubing, ribbon, and multiconductor cables from 0.8 – 12.5 mm (0.032 – 0.49") with cross-sections from 0.14 – 16 mm² (26 – 6 AWG). Standard applications of the Cut & Strip machine series E400 include stripping the outer jacket in several steps, as well as full and partial strips on either or both sides. It processes ...
Showcase
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Zeta 630 increases productivity in control cabinet construction with two process modules from batch size 1 and with up to 36 different wires in the wire changer. The wide variability of control cabinet construction requires many materials such as wire types, terminals or ferrules. The Zeta 630 allows just-in-time processing in batch or sequence production of various wires for cabinet building ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The CoaxStrip 5300 RX strips wires and cables with conductors ranging from 0.07 mm (0.003") to 1.8 mm (0.071") in outer diameter, with a maximum stripping length of 29 mm (1.14"). The CoaxStrip 5300 RX strips extremely thin microcoaxial cables with inner diameters as small as 0.07 mm (42 AWG)—thinner than a human hair—in very short cycle times. This machine handles materials that are ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The QpLite is a simple and mobile crimp force monitoring device that captures quality based on crimp force curves on tabletop crimpers. The QpLite’s simple touch display allows for intuitive operation. The user is guided through the quality validation including measurement of the crimp height, crimp width and pull-out force. The validated data is automatically stored in the database. The ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Omega 740/750 wire assembly machine can be used to produce wire harnesses of various complexity and to equip them with terminal housings on one or both sides. Depending on the design, five (Omega 740) or eight (Omega 750) modules can be installed. This means that autonomous wire harnesses can be created in a short production time. The Omega series is manufactured for automated wire harness ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The M1630 Jet inkjet printer enables fast, flexible line printing with short changeover times. Operation takes place directly via the machine control. The strengths of the M1630 Jet inkjet marker are low manufacturing costs, efficiency at high volumes and frequent change of print content. It comes in BC (black marking), P (pigmented inks) and S versions (for small fonts in black). The marker is ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The first choice for efficient crimp-to-crimp large-scale production. The Alpha 550 G2 is a future-proof investment and ready for the next step in automated batch production. The Alpha 550 G2 sets new standards in high-volume crimp-to-crimp production. It stands for reliable performance that produces the highest volume at the lowest cost. It delivers proven OEM quality and fast changeover times ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The The PreFeeder 2500 is an active dereeler and the ideal feeding system for wire, small cables and tubing of up to 12 mm (0.47") in diameter with a rotating speed of 265 rpm. The PreFeeder 2500 is a simple solution for high production output. The feeding process allows rapid acceleration at various speeds of up to 265 rpm. Because of the active dereeling of the cable wheel the pull force within ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The KTB EK electric bundling machine is based on the proven technology of the KTB E Plus but is specially designed for integration into welding tables. The EK series electric bundlers are based on the KTB 50 E PLUS technology. In addition to the proven advantages, such as short process cycles and flexibility in processing diverse strips, the unit can be integrated into the production sequence ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The synchronized WireStacker 3150 is designed for precise axial stacking of cables – available in lengths of 2.5 m (8.2 ft), 5 m (16.4 ft), 7.5 m (24.6 ft), and 10 m (32.8 ft). The built-in, synchronized driven transport belts of the WireStacker 3150 allow for stacking cables carefully and safely without wire jams, even for very flexible wires. It processes wires with a diameter of 1.5 ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The MicroLab 45 is the best micrograph labratory for high level quality checks. With the fully automatic transport system, it quickly meassures and evaluates micrograph pictures. MicroLab 45 is designed for fast micrograph preparation of specimens up to a maximum diameter of 6 mm. The fully automatic transport system and the proven technology enable a short processing time. Parallel processes ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The IRMO is an infrared shrinking appliance for products with diameters up to 16 mm (0.6 in). It''s ideal for mobile use thanks to its small size and integrated trigger button. The IRMO is a hand-held infrared shrinking appliance that is perfect for use in difficult to reach and confined spaces, such as electrical cabinets, as well as for cable harness assembly boards. With its small size and ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The electronic crimp-force monitoring system ACO 08 can be integrated into all Schleuniger benchtop crimping presses and into similar third-party products. The ACO 08 was designed to monitor the crimping processes while production is running. It analyzes each individual crimp force curfe in detail in order to optimize processing steps and document quality assurance.With its user-friendly ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
With the ferrule module CM 1/5 GS, up to five different ferrules on strap in different lengths can be processed with a Quadro crimp design. The ferrule module CM 1/5 GS saves you precious time. There is no need for time-consuming conversion, as the machine processes ferrules sequentially: ferrules on strap of 0.5 – 2.5 mm² cross-sections and in 8 and 10 mm lengths can be inserted in ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Crimp Module Analyzer quality measuring device is used to measure and check the stability of the crimp module in μm using a two-stage force simulator. The crimp module analyzer allows the stability of the module stroke (STSA, Stroke Stability Analysis) to be measured for mci 7x1, mci 7x2, bt 7x2 and C13x0. A PC or laptop with at least Windows® 10 (64 Bit) is required to perform the ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The online clip test from Komax Testing is an automated and real-time solution for testing the presence and positioning of clips on cable harnesses during production. This wireless testing solution offers reliable detection of clips, high accuracy, and rapid testing speeds. It is also customizable and can be integrated into existing production lines and automated processes. The online clip test ...