Show results for
Refine by
Sludge Processing Equipment Supplied In Romania
20 equipment items found
Manufactured by:Asio, spol. s r.o. based inBrno, CZECH REPUBLIC
The spiral dehydrator is used for the thickening and subsequent dewatering of sludge. The equipment is small and lightweight and can work in automatic operation with minimal maintenance requirements. The device guarantees the thickening of activated sludge to at least 18% of dry matter, for sludge from municipal ...
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
The Cambi Thermal Hydrolysis Process improves Anaerobic Digestion by using high temperature and pressure to break down complex substrates before they are introduced to the digestion process. Sludges treated through the Cambi process can also be introduced into a Digester at a much higher concentration. ...
Manufactured by:EnviroChemie GmbH - part of the EnviroWater Group based inRossdorf bei Darmstadt, GERMANY
High-performance biological process for wastewater treatment. Compact, space-saving process with high cleaning performance. Membrane bioreactors for wastewater treatment consist of an activated sludge process combined with subsequent membrane filtration, which removes both solids and sludge particles. Because any ...
Manufactured by:Adiss S.A. based inTau?ii Magheraus, ROMANIA
The transport of coarse, fine, or compacted solids, sludge, sand, and industrial process solids can be achieved using enclosed spiral conveyors, trough conveyors with covers, or belt conveyors. These can be sized, designed, and manufactured according to the client's needs and requirements. ...
Manufactured by:Arges Concept | S.C. Arges WWT Concept S.R.L. based inBucuresti, ROMANIA
It is based on greenhouse and wind effects where the sludge is mechanically mixed with a mixing device periodically at a greenhouse. The operation of the plant is fully automated and can be monitored from a remote location. Totally safe and efficient system was the most advantageous ...
Manufactured by:Asio, spol. s r.o. based inBrno, CZECH REPUBLIC
Sludge stabilization is a process in which organic substances are degraded. When the ATS technology is used, this reaction is carried out with the use of aerobic microorganisms. In this process, energy is released from sludge, causing heating up to more than 50° C. In this way such high speeds of degradation of organic ...
Manufactured by:Arges Concept | S.C. Arges WWT Concept S.R.L. based inBucuresti, ROMANIA
Package Type WWTPs are usually called as decentralized systems. They might be preferable when the land has less slops and the sewage line should go deep. In this case small capacity units, constructed in a short distance near the source will be more suitable to use and the treated water can be used to irrigate the recreational ...
Manufactured by:ATB Water GmbH based inPorta Westfalica, GERMANY
Efficient and most advanced technology for municipal and industrial wastewater ...
Manufactured by:EnviroChemie GmbH - part of the EnviroWater Group based inRossdorf bei Darmstadt, GERMANY
Anaerobe wastewater treatment is a proven technology for treating wastewater with high levels of organic contamination. Resource-saving wastewater treatment with a high degradation rate and energy recovery. Anaerobic processes for wastewater treatment are biological processes in which organic contaminants are converted into biogas and thus removed from the ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Self-cleaning crossflow filter for pressurized pipe sampling. Stamoclean CAT411 provides bacteria-free micro filtration of samples from pressure pipes. Its self-cleaning crossflow filter avoids filter blocking, thus increasing your process safety. Thanks to a minimized dead volume, it reflects changes of your process promptly and shortens the response time of your downstream measuring devices. ...
Manufactured by:Adiss S.A. based inTau?ii Magheraus, ROMANIA
The ADIPUR compact wastewater treatment plant is one main product of our company. ADIPUR is intended for advanced treatment (it also reduces nitrogen and phosphorus) of the urban wastewater and of the domestic wastewater in urban areas with an aproximate number of 6.000 equivalent inhabitants. In particular cases these plants can expand to treating urban wastewater for up to 12.000 ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
Welded Manifolds are the modern Plug&Play solution for supplying the AEROSTRIP with air. Depending on the requirements of the aeration system and the reactor geometry, the AEROSTRIP manifolds are delivered custom-made. This enables easy and quick ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
Large diffuser surface - compactly installed. AEROSTRIP Modules combine the high performance of the strip diffuser with the quick and easy assembly of the plate diffuser. The AEROSTRIP modules are available in lengths of 2 - 4 meters and a width of 1 meter. Compared to other systems (plates, tubes, strips), modules have a significantly larger area, which means that less effort is required for ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
The AEROSTRIPc is the high end product among the diffusers. It was designed as a fine-bubble diffuser with extremely low energy requirements and has been used in both municipal and industrial wastewater treatment plants worldwide since 1995. The diffuser body is made of high-alloy, corrosion-resistant stainless steel. This makes the AEROSTRIP Type T a durable and therefore particularly ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
The AEROSTRIP Type Q is one of the most powerful diffusers on the market. It was designed as a fine-bubble diffuser with extremely low energy requirements and has been used in both municipal and industrial wastewater treatment plants worldwide since 2005. The basic body of the AEROSTRIPs is made of high-quality PVC. Polyurethane is used as the material for the diffuser membrane. Polyurethane has ...
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
Sewage sludge dewatering offers enormous potential savings for the operators of sewage treatment plants. The costs of transport and disposal of the dewatered sewage sludge frequently make up 80% of operating costs. Depending on the capacity of the plant, 1% more dry substance in the dewatered sewage sludge can represent cost savings in the five- to six-digit range. ...
Manufactured by:Noardling B.V. based inSneek, NETHERLANDS
Noardling is the world's leading solution provider for wastewater aeration. We have extensive knowledge and experience, and a strong track record in this field. For more than half a century we have designed, manufactured, supplied, installed and maintained fine bubble aeration systems as well as surface aeration systems. These include low speed surface aeration impellers and horizontal brush ...
Manufactured by:SURCIS, S.L. based inBarcelona, SPAIN
BM-Advance2 is a two reactors respirometer specially developed for practical and efficient biological wastewater treatment management, design and ...
Manufactured by:SURCIS, S.L. based inBarcelona, SPAIN
BM-T+ is a easily transportable respirometer, specially developed for practical and efficient biological wastewater treatment management and ...
Manufactured by:SURCIS, S.L. based inBarcelona, SPAIN
BM-EVO2 is a two reactors respirometer specially developed for practical and efficient biological wastewater treatment management, design and ...