Show results for
Refine by
Applications
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Particle Measurement Instruments for Engine Emissions
- Process analyzers & instruments for continuous emissions monitoring
- Particle Measurement Instruments for Non-Road Engine Emissions
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Air pollution, emission and process monitoring systems for power generation
- XRF Spectrometers solutions for environmental monitoring sector
- Advanced FT-NIR Analysis for Food Industry
- FT-NIR Analaysis for alcoholic beverages industry
- Near-Infrared Analysis for Edible Oil Sector
- Advanced FT-NIR Solutions for Pharmaceutical Development and Manufacturing Sector
- FT-NIR analaysis for chocolate & cocoa sector
- FT-NIR analaysis for fish & seafood sector
- FT-NIR analysis for coffee sector
- FT-NIR analysis for measuring meat products sector
- FT-NIR spectroscopy in rapid detection of paprika adulteration sector
- FT-NIR spectroscopy in sugarcane liquor industry
- FT-NIR analaysis for meat & poultry industry
- FT-NIR analaysis for non-alcoholic beverages sector
- FT-NIR analaysis for snack food industry
- FT-NIR analaysis for spices & raw ingredients sector
- Detecting melamine adulteration in milk powder sector
- FT-NIR analysis for pharmaceutical raw material identification sector
- FT-NIR analysis for verifying raw materials through plastic and paper packaging industry
- EDXRF spectrometers for metal & ore
- EDXRF spectrometers for educational industry
- Process analyzers & instruments for sulfur recovery tail gas
- Process analyzers & instruments for sulfur pit gas
- Process analyzers & instruments for SO2 emissions
- Process analyzers & instruments for NOx emissions
- Advanced FT-NIR Analysis for Chemicals & Polymers Industry
Sample Heating Equipment Supplied In Turkey
74 equipment items found
Premium
Manufactured by:ENVEAÂ Â based inPoissy, FRANCE
The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers. Ideal for corrosive gases. (Plug & play sampling solution for: MIR FT, MIR 9000H, Graphite 52M, Topaze 32M,…). To be used with heated analyzers such as MIR FT, MIR 9000H, Graphite 52M, Topaze ...
Manufactured by:ENS Instruments  based inOstim, TURKEY
The HSP3 Isokinetic Heated Sampling Probe by ENS Instruments is designed for sampling particulate matter and chemicals from emissions in stack environments. Its design includes a heated filter box and holder located at the back of the probe, effectively preventing condensation of water vapor and certain volatile organic ...
Premium
Manufactured by:ENVEAÂ Â based inPoissy, FRANCE
The LCPD BOX is a full extractive sampling probe assembly which extracts the sample gas through a probe & heated filter to remove particulates. To be used with heated analyzers, or with unheated analyzers such as MIR 9000, MIR 9000e, IR IS, by adding a cooling dryer ...
Manufactured by:ENS Instruments  based inOstim, TURKEY
The HSP2 Isokinetic Heated Sampling Probe by ENS Instruments is engineered to facilitate efficient sampling of particulate matter and chemicals directly from stacks. Designed in compliance with international standards such as EN16911 and US EPA M1/2, the probe offers a versatile approach by allowing adjustments to cater to vertical or horizontal ...
Manufactured by:Protea Limited  based inMiddlewich, UNITED KINGDOM
Fixed or mobile sample probes, stainless steel or PTFE lined, Protea is able to provide a solution to measurement from any sample point. With integrated sample filters of ceramic, PTFE, or microfiber construction these probes ensure that the sample passing to the analytical equipment is of sufficient quality to enable long life of ...
Manufactured by:Protea Limited  based inMiddlewich, UNITED KINGDOM
Protea supplies heated sample lines of lengths 1m to 50m for the sampling of gaseous samples where sample temperature control is imperative. With dedicated integrated calibration lines and robust end fittings, these lines are suitable for fixed or mobile applications. Protea also supplies ATEX approved ...
Manufactured by:Protea Limited  based inMiddlewich, UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this also allows it to ...
Manufactured by:Protea Limited  based inMiddlewich, UNITED KINGDOM
Protea’s in-house Temperature Control Unit (TCU) has been designed to allow simple use of heated sample lines and heated sample probes with Protea’s range of gas analyser. The controller unit contains PID control for accurate set-point of heated sampling equipment, such as at ...
Manufactured by:Protea Limited  based inMiddlewich, UNITED KINGDOM
For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas ...
Manufactured by:Dekati Ltd.  based inKangasala, FINLAND
Can be operated with temperature controller DR- ...
Premium
Manufactured by:Metrohm AGÂ Â based inHerisau, SWITZERLAND
The 885 Compact Oven Sample Changer is used for thermal sample preparation in Karl Fischer titration. In the oven the samples can be heated up to 250°C. The moisture contained in the sample evaporates and is transported by a dry carrier gas into the titration cell, where the analysis takes ...
Premium
Manufactured by:BUCHIÂ Â based inFlawil, SWITZERLAND
The multipurpose solution for small samples: Introducing the Glass Oven G-300, BUCHI’s all-in-one instrument for small samples. With interchangeable accessories, the Glass Oven G-300 can perform distillation, drying, sublimation, and freeze-drying, eliminating the need for multiple large instruments. Its compact size even allows placement in a glovebox, ensuring the safe handling of ...
Premium
Manufactured by:Metrohm AGÂ Â based inHerisau, SWITZERLAND
Its robust design makes the NIRS DS2500 Polyol Analyzer resistant to dust, moisture, and vibrations, which means that it is highly suitable for use in harsh production environments. The NIRS DS2500 Polyol Analyzer covers the full spectral range from 400 to 2,500 nm, heats samples up to 80 °C, and delivers accurate results in less than one minute. The NIRS ...
Premium
Manufactured by:BUCHIÂ Â based inFlawil, SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
Premium
Manufactured by:Analytik Jena - Lab-loving people  based inJena, GERMANY
The CyBio system for heating and orbital mixing of reagents is the fully automated solution for incubating and denaturation of substances in the temperature range from ambient to 99 °C. An optimum heat transfer is realized through specific plate adapters, furthermore the Edge Locking Mechanism (ELM) guarantees the repeatable and accurate positioning of ...
Premium
Manufactured by:Metrohm AGÂ Â based inHerisau, SWITZERLAND
The 895 Professional PVC Thermomat determines the thermostability of polyvinyl chloride (PVC) and other chlorine-containing polymers by means of the dehydrochlorination test (DHC). This involves exposing the samples to elevated temperatures in the PVC Thermomat and measuring the stability time – the time until gaseous hydrogen chloride is released. The method is compliant with national and ...
Premium
Manufactured by:Metrohm AGÂ Â based inHerisau, SWITZERLAND
Robust near-infrared spectroscopy for quality control, not only in laboratories but also in production environments. The DS2500 Liquid Analyzer is the tried and tested, flexible solution for routine analysis of liquids along the entire production chain. Its robust design makes the DS2500 Liquid Analyzer resistant to dust, moisture and vibrations, which means that it is eminently suited for use in ...
Premium
Manufactured by:Metrohm AGÂ Â based inHerisau, SWITZERLAND
Near-infrared spectrometer for liquid samples. Developed and produced in accordance with Swiss quality standards, the OMNIS NIR Analyzer is the near-infrared spectroscopy (NIRS) solution for routine analysis along the entire production chain. Its application of the latest technologies and its integration in the modern OMNIS Software are reflected in its speed, operability, and flexible ...
Premium
Manufactured by:Metrohm AGÂ Â based inHerisau, SWITZERLAND
Developed and produced in accordance with Swiss quality standards, the OMNIS NIR Analyzer is the near-infrared spectroscopy (NIRS) solution for routine analysis along the entire production chain. Its application of the latest technologies and its integration in the modern OMNIS Software are reflected in its speed, operability and flexible utilization of this NIR ...
Premium
Manufactured by:Metrohm AGÂ Â based inHerisau, SWITZERLAND
Developed and produced in accordance with Swiss quality standards, the OMNIS NIR Analyzer is the near-infrared spectroscopy (NIRS) solution for routine analysis along the entire production chain. Its application of the latest technologies and its integration in the modern OMNIS Software are reflected in its speed, operability and flexible utilization of this NIR ...