Show results for
Refine by
Applications
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Particle Measurement Instruments for Engine Emissions
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Process analyzers & instruments for continuous emissions monitoring
- Particle Measurement Instruments for Non-Road Engine Emissions
- Stack emissions monitoring
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Air Pollution Measurements for Education
- Measurement solution for WID Emissions Monitoring
- Measurement solution for QAL2 EN 14181
- Industrial monitoring solutions for the gas analysers areas
- Fire detection solutions for the power stations sector
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for sulfur pit gas
- Process analyzers & instruments for tail gas treating unit (TGTU)
- Process analyzers & instruments for NOx emissions
Sampling Probe Equipment Supplied In Turkey
69 equipment items found
Manufactured by:Bastak based inYenimahalle, TURKEY
The device is Bastak branded and its model is 10 000 - 10100 - 10200. The device, by means of powerful vacuum engine that it has, stores grains such as wheat, barley, paddy, rye and oat as well as heavy products such as corn, bean and chickpea pneumatically (by vacuum) in 2-6 seconds into the sample collection container which is at the ...
Manufactured by:ENS Instruments based inOstim, TURKEY
The HSP3 Isokinetic Heated Sampling Probe by ENS Instruments is designed for sampling particulate matter and chemicals from emissions in stack environments. Its design includes a heated filter box and holder located at the back of the probe, effectively preventing condensation of water vapor and certain volatile organic ...
Manufactured by:ENS Instruments based inOstim, TURKEY
The Cooling Box is an integral component of the HSP2 sampling probe used for condensing water in stack gas, aiding in the detection of micropollutants when used in conjunction with impinger trains. Designed for easy attachment without tools to the heated filter box, it minimizes water condensation by shortening the connection between the filter holder and ...
Manufactured by:ENS Instruments based inOstim, TURKEY
The HSP2 Isokinetic Heated Sampling Probe by ENS Instruments is engineered to facilitate efficient sampling of particulate matter and chemicals directly from stacks. Designed in compliance with international standards such as EN16911 and US EPA M1/2, the probe offers a versatile approach by allowing adjustments to cater to ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Fixed or mobile sample probes, stainless steel or PTFE lined, Protea is able to provide a solution to measurement from any sample point. With integrated sample filters of ceramic, PTFE, or microfiber construction these probes ensure that the sample passing to the analytical equipment is of ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
For measurement of gases that do not require hot measurements, Protea can supply sample probes of various material construction. This includes probes made of materials such as PEEK allowing for measurement of possible corrosive ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The CP5 is a modern version of the classic unheated cold sample probe for the isokinetic sampling of particulate matter in stack emissions. The CP5 design and construction follow the philosophy of being easy and practical to use on the stack. The CP5 is fully realized in AISI316 and is supplied including the AISI316 inner tube, thermocouple and ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Set incl. 11 pcs stainless steel sampling probes (3,45- 3,81-4,16-4,57-5,0-5,46-5,92-6,71-7,62-8,69-9,9 mm). Sampling probes can be directly connected into SAC-65 sampling cyclone inlet (R3/8") or IPR-500. Set includes also 11 pcs Cu gaskets 17/21x1.5 ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Can be operated with temperature controller DR- ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman® Pro 785H is a fully integrated Raman system with an embedded tablet computer and a light-guide sampling probe, offering users high-sensitivity, high-resolution, research-grade, portable Raman analyses. Using a high-quantum-efficiency CCD array detector with TE deep cooling and high dynamic range, the portable i-Raman® Pro system delivers ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman® Prime 532H is a low-noise, high-throughput, and fully integrated Raman system with an embedded tablet computer and a fiber-optic sampling probe. Using a high-quantum-efficiency CCD array detector with TE deep cooling (-25 °C) and high dynamic range, this portable Raman spectrometer delivers research-grade Raman analysis capabilities, ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman® Pro 785S is a fully integrated Raman system with an embedded tablet computer and a fiber-optic sampling probe, offering users high-sensitivity, high-resolution, research-grade, portable Raman analyses. Using a high-quantum-efficiency CCD array detector with TE deep cooling and high dynamic range, the portable i-Raman® Pro system delivers ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman® Prime 785H is a low-noise, high-throughput, and fully integrated Raman system with an embedded tablet computer and a fiber-optic sampling probe. Using a high-quantum-efficiency CCD array detector with TE deep cooling (-25 °C) and high dynamic range, this portable Raman spectrometer delivers research-grade Raman analysis capabilities, ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman® Prime 785S is a low-noise, high-throughput, and fully integrated Raman system with an embedded tablet computer and a fiber-optic sampling probe. Using a high-quantum-efficiency CCD array detector with TE deep cooling (-25 °C) and high dynamic range, this portable Raman spectrometer delivers research-grade Raman analysis capabilities, ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman Duo is a dual-laser Raman system that captures a wide spectral range with one spectrometer and sampling probe. It uses a 1064 nm laser to measure the fingerprint region (100–2500 cm⁻¹), providing accurate chemical details while reducing fluorescence interference. Additionally, an 860 nm laser covers the stretch region (2500 - 4600 ...
Manufactured by:ENS Instruments based inOstim, TURKEY
The ISO Smart Plus model features five thermocouple inputs designed to monitor and control flue gas temperatures, heated sampling probe temperatures, and filter holder temperatures, alongside two additional sensors for measuring temperatures in the impingers. A pitot tube aids in measuring flue gas velocity, which is processed by an integrated microprocessor to ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The LCPD BOX is a full extractive sampling probe assembly which extracts the sample gas through a probe & heated filter to remove particulates. To be used with heated analyzers, or with unheated analyzers such as MIR 9000, MIR 9000e, IR IS, by adding a cooling dryer ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The design, which is just as robust as it is ergonomic, makes the NIRS XDS SmartProbe Analyzer the ideal quality control solution, both in the warehouse and in the laboratory. Using the NIRS XDS SmartProbe Analyzer could not be easier. The measurement is taken by holding the probe in the sample and pressing the measurement button. Pass/fail results can be read ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The SM-4 Mobile by Mercury Instruments has been developed on the basis of the well proven SM-4 mercury stack gas monitor. Its measurement principle and technique, its thermocatalytic reactor, the detector and the sample probe are identical with those of the stationary ...