- Home
- Equipment
- usa california
- stack testing
Refine by
Stack Testing Equipment Supplied In California
14 equipment items found
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring. The Model T100H provides a simple but precise solution for a broad range of CEM and stack testing ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation. The pump drive mechanism and motor have been designed for continuous, smooth and low ...
Manufactured by:Thermo Scientific - Air Quality Instruments based inFranklin, MASSACHUSETTS (USA)
The Thermo Scientific™ Model 42i-HL is a chemiluminescent gas analyzer which measures nitrogen oxides (NO-NO2-NOx) in the emissions from a source. The Model 42i-HL is the industry standard for high level NOx Continuous Emissions Monitoring (CEM) systems and stack testing services. Using chemiluminescence technology, the Model 42i-HL measures the amount of ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
It is being manufactured since 1974 and is thevery first heated THC analyzer ever built using a permanent back purge sample filter. It is still the mostly liked heated FID throughout the stack testing community and best known for its legendary ruggedness, forgiveness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The 3-300A was a also “first” in the industry due to its sample filter back purge feature. It is also a very much liked 19″ rack mount heated FID throughout the stack testing community and well known for its ruggedness, forgiveness and long standing accuracy and sensitivity. The 3-300A is fully identical to the VE7 and 3-200 and has been ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
Also among other portable gas FIDs, the 3-200 It is the first ever built transportable fully heated FID using high pressure back purge sample filter. It is widely distributed throughout the industry and the stack testing community and is much liked for its ruggedness, high accuracy, sensitivity and ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
Gas analyzers for emissions measurement are typically exposed to heavy soot dust and condensed hydrocarbon contamination. Therefore it is absolutely necessary to fine filter the sample gas stream and prevent HC memory effects in the entire sample train. The J.U.M. Engineering PreFilter® 112 is an efficient, all heated and low pressure drop interface and sample filter for removing solids from ...
Manufactured by:California Analytical Instruments, Inc. (CAI) based inOrange, CALIFORNIA (USA)
The ZPA analyzer uses NDIR technology to measure CO, C02, CH4, S02, NO and paramagnetic or fuel cell for oxygen. The ZPA NDIR technology is based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, this analyzer produces highly stable and reliable results. A single infrared light beam is modulated by a chopper system and passed through ...
by:National Instruments based inAustin, TEXAS (USA)
The wide measurement range is well suited for high-voltage measurement applications such as power metering, power quality monitoring, motor test, battery stack testing, and fuel cell tests. You can perform transient and harmonic analysis with high-speed simultaneous sampling. In addition, you can prevent ground loops and add ...
Manufactured by:Universal Analyzers - AMETEK, Inc based inCarson City, NEVADA (USA)
The 500 series portable sample chiller is a staple to the mobile stack testing and laboratory setting. In order to analyze stack gas or exhaust from any combustion process, a method to remove moisture from the sample without removing gas components of interest is a must. The Universal Analyzers Thermoelectric Sample Cooler, which derives its ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Sample Interface Panel is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Interface Panel will meet the requirements for sampling during model development and PEMS QA activity. The Sample Interface Panel ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Probe is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Probe will meet the requirements for sampling during model development and PEMS QA activity. The Probe is required to connect the sample line and the ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Sample Line is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Line will meet the requirements for sampling during model development and PEMS QA activity. The Sample Line is required to connect the Probe ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Mobile CEMS is a complete mobile monitoring system on wheels and an integral part of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Mobile CEMS will meet the requirements for use in reference method ...