Refine by
Applications
- Screening Equipment and Filters for Power Plants
- Screening Equipment and Filters for Oil and Gas
- Articulating Concrete Mattress System for Boat Ramps
- Articulating Concrete Mattress System for Access Roads/Driving Surface
- Articulating Concrete Mattress System for Border Wall Infrastructure
- Articulating Concrete Mattress System for Bridges
- Articulating Concrete Mattress System for Coastal Protection
- Articulating Concrete Mattress System for Culvert Protection
- Articulating Concrete Mattress System for Dams & Levees
- Articulating Concrete Mattress System for Energy
- Articulating Concrete Mattress System for Landfill Down Chutes
- Articulating Concrete Mattress System for Low-Water Crossings
- Automated wire processing solutions for quality solutions areas
- BIA-ACC Device for OSO-Test
Cable Testing Equipment & Supplies Near Libya
335 equipment items found
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage fKVl: 150 ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
Cable test termination systems are used for high voltage testing of power cables. Before high voltage (AC or Impulse) can be applied the power cable need to be prepared and terminated in a special way order to control the electrical field distribution along the ...
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage (KV): 300 ...
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage (KV): 400 ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Van-based cable test and fault location system ETL-8 is used for testing cable insulation and locating cable faults using a variety of methods. Due to its compact size, ETL-8 may be installed in a minivan, yet it is a fully-featured cable test and fault location system which ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
ETL-15 is a cable test van used for testing cable insulation and locating faults in power cables. ETL-15 is compact enough to be mounted even in a minivan, yet contains all the equipment typically found in a fully-featured cable test and fault location system, including burn ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Mobile systems SWG-12 and SWG-32 are designed for the following applications: testing insulation of power cables with DC voltage up to 32 kV; conditioning faults by burning faulty cable insulation with DC current up to 100 mA at up to 32 kV voltage; pre-locating cable faults with an aid of the reflectometer RIF-9 using a ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 800-5 is a low-voltage tester for particularly large test items and features an innovative test technology for checking wire harnesses in installed condition. The NT 800-5 can save 70% of adapter cables and does not require any additional cables or power supply thanks to ATA (active termination adapter) technology. This ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The high-voltage tester Easy-Touch Pro is a powerful standalone unit that can also be seamlessly integrated into a manufacturing process for consistent and accurate testing. The Cirris Easy-Touch Pro offers advanced testing capabilities for low and high-voltage cables, as well as components like diodes, resistors, capacitors, and twisted ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The low-voltage cable tester Cirris 4200 ensures precise detection of opens, shorts, miswires, and other errors, starting with 128 test points and expandable to 1024. The Cirris 4200 cable tester is designed to bring precision and efficiency to your cable testing needs. Equipped with the robust Cirris OS software ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The CT30ix is an accurately measuring, intelligent cable tester with a proven measuring system, complex functions, testpoint management and a user-friendly color display. The CT30ix cable tester can be used as an assembly aid in production or for quality control of wire harnesses due to its advanced measuring system. The large color display with user-friendly ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 700-2 and NT 700-3 wiring testers are designed with up to 1024 test points for insulation testing up to 1500 VDC and voltage proof tests up to 4670 VDC and 3300 VAC. The NT 700-2 test device has test point interfaces on the front, while the NT 700-3 model is designed as a test bench variant with test point interfaces on the rear. Although they differ in their application, both perform ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The low- and high-voltage harness tester, Cirris CH2, supports testing up to 1500 VDC and 1070 VAC. It can be expanded to 100,000 test points for increased throughput. The advanced CH2 tester can expand to up to 100,000 test points in 156-point increments. Its compact base and expansion chassis each hold up to 800 test points. Automatic low-voltage pretests detect errors before high-voltage ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 211 low-voltage wiring tester is designed for testing network cabling. It has 512 test points and can be extended to up to 2048 test points. The NT 211 low-voltage wiring tester is ideal for use on test desks and test benches, but can also be used in stand-alone operation. The ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 600 modular wiring tester with 1024 test points (extendable to 5120) performs high voltage tests up to 1500 VDC/1060 VAC and optionally high current tests up to 2 ADC. The NT 600 modular wiring tester is the ideal entry-level device for demanding low-voltage and high-voltage tests. The system performs connection, short-circuit and component tests as well as optional high voltage tests up ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 800-1 wiring tester is designed for testing up to 131,072 test points, particularly for very large test items such as those used in the aerospace industry. The NT 800-1''s distributed test systems consist of a base unit (control unit and measurement technologies) and additional test point units (TPU) with the included test points, which can be arranged centrally or in a satellite-like ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The high-voltage test bench system with fully integrated test technology can be used to test cables and wire harnesses with voltages up to 5000 VAC/6000 VDC. The HV test bench system from adaptronic enables connection tests, short-circuit tests, component tests, ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 236 mobile high-voltage tester in a hard-shell case without a display tests insulation at up to 512 test points up to 1000 VDC and test voltages of 80 - 1000 V. The NT 236 HV wiring tester is a mobile solution for your wiring tests and comes in a heavy-duty, waterproof, and dust-proof hard-shell case.Providing high-voltage tests up to 1000 VDC and the ability to test with up to 512 test ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Enhance your testing efficiency with a wide range of tools and accessories from Komax Testing, adaptronic, and Cirris. From extension units, adapter cables, and calibration sets to sensors, printers, and tilt stands – these practical add-ons expand functionality, simplify setup, and ensure precise, reliable testing for ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Developed for high voltage testing, the CT45-HV 3kV Rack device is a relay matrix rack with an upgraded CT45 controller designed to incorporate all CS WIN nx® functionalities. The combination of the CT45-HV 3kV Rack device with the CS WIN nx® testing software enables the integration of both low and high voltage technologies in a single application, providing full flexibility. The CT45-HV ...