Refine by
Applications
- Screening Equipment and Filters for Power Plants
- Screening Equipment and Filters for Oil and Gas
- Articulating Concrete Mattress System for Boat Ramps
- Articulating Concrete Mattress System for Access Roads/Driving Surface
- Articulating Concrete Mattress System for Border Wall Infrastructure
- Articulating Concrete Mattress System for Bridges
- Articulating Concrete Mattress System for Coastal Protection
- Articulating Concrete Mattress System for Culvert Protection
- Articulating Concrete Mattress System for Dams & Levees
- Articulating Concrete Mattress System for Energy
- Articulating Concrete Mattress System for Landfill Down Chutes
- Articulating Concrete Mattress System for Low-Water Crossings
- Automated wire processing solutions for quality solutions areas
- BIA-ACC Device for OSO-Test
Cable Testing Equipment & Supplies Near Namibia
335 equipment items found
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage fKVl: 150 ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
Cable test termination systems are used for high voltage testing of power cables. Before high voltage (AC or Impulse) can be applied the power cable need to be prepared and terminated in a special way order to control the electrical field distribution along the ...
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage (KV): 300 ...
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage (KV): 400 ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Van-based cable test and fault location system ETL-8 is used for testing cable insulation and locating cable faults using a variety of methods. Due to its compact size, ETL-8 may be installed in a minivan, yet it is a fully-featured cable test and fault location system which ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
ETL-15 is a cable test van used for testing cable insulation and locating faults in power cables. ETL-15 is compact enough to be mounted even in a minivan, yet contains all the equipment typically found in a fully-featured cable test and fault location system, including burn ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Mobile systems SWG-12 and SWG-32 are designed for the following applications: testing insulation of power cables with DC voltage up to 32 kV; conditioning faults by burning faulty cable insulation with DC current up to 100 mA at up to 32 kV voltage; pre-locating cable faults with an aid of the reflectometer RIF-9 using a ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 700-2 and NT 700-3 wiring testers are designed with up to 1024 test points for insulation testing up to 1500 VDC and voltage proof tests up to 4670 VDC and 3300 VAC. The NT 700-2 test device has test point interfaces on the front, while the NT 700-3 model is designed as a test bench variant with test point interfaces on the rear. Although they differ in their application, both perform ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 211 low-voltage wiring tester is designed for testing network cabling. It has 512 test points and can be extended to up to 2048 test points. The NT 211 low-voltage wiring tester is ideal for use on test desks and test benches, but can also be used in stand-alone operation. The ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Enhance your testing efficiency with a wide range of tools and accessories from Komax Testing, adaptronic, and Cirris. From extension units, adapter cables, and calibration sets to sensors, printers, and tilt stands – these practical add-ons expand functionality, simplify setup, and ensure precise, reliable testing for ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 800-5 is a low-voltage tester for particularly large test items and features an innovative test technology for checking wire harnesses in installed condition. The NT 800-5 can save 70% of adapter cables and does not require any additional cables or power supply thanks to ATA (active termination adapter) technology. This ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The universal KT 630 wiring tester with up to 1024 test points improves your quality assurance through precise low-voltage and high-voltage tests. The KT 630 wiring tester offers insulation tests up to 1500 VDC, dielectric strength tests up to 1060 VAC/1500 VDC, and high-current tests up to 2 ADC. It also performs precise connection, short-circuit, and component tests, as well as accurate testing ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The low- and high-voltage tester Cirris 4250 ensures accurate testing of opens, shorts, miswires, and other errors It is expandable from 128 test points up to 1024 points in 128-point increments. The Cirris 4250 cable tester elevates cable testing with advanced features for both low- and high-voltage ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 231 high-voltage tester with PC control offers up to 512 test points and checks up to 1000 VDC. Optimized for operation on test panels and test desks. The NT 231 wiring tester, the smallest high-voltage tester in adaptronic''s NT series, was specifically developed for operation on test desks and test benches. With functions such as adapter LEDs, an insertion aid for the production of wire ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The KT 211 low-voltage wiring tester provides optimized testing of cables and wire harnesses on test benches with 512 test points (expandable to up to 2048 test points). The compact, powerful, and cost-effective KT 211 low-voltage wiring tester facilitates testing during wire harness production ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 410 / NT 411 low-voltage wiring tester with the NT Control control software tests voltages up to 25 V and currents up to 25 mA at 2048 or up to a maximum of 16384 test points. The NT 410 / NT 411 test device checks the quality of every electrical connection with a single device – from the smallest printed circuit board to the most ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The low- and high-voltage harness tester, Cirris CH2, supports testing up to 1500 VDC and 1070 VAC. It can be expanded to 100,000 test points for increased throughput. The advanced CH2 tester can expand to up to 100,000 test points in 156-point increments. Its compact base and expansion chassis each hold up to 800 test points. Automatic low-voltage pretests detect errors before high-voltage ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Developed for high voltage testing, the CT45-HV 3kV Rack device is a relay matrix rack with an upgraded CT45 controller designed to incorporate all CS WIN nx® functionalities. The combination of the CT45-HV 3kV Rack device with the CS WIN nx® testing software enables the integration of both low and high voltage technologies in a single application, providing full flexibility. The CT45-HV ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The TS1700-ALU test system is the solution for complex wire harnesses. Our largest and most flexible test system is suitable for testing very extensive and complex wire harnesses. The TS1700-ALU test system streamlines wire harness testing and improves the overall efficiency of production processes. Its ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
With a compact and rugged design, the low-voltage tester Cirris 8100 supports up to 100,000 test points and tests complex wire assemblies as part of your production process. The 8100 low-voltage tester, powered by Easy-Wire® software, offers seamless integration into your production process. Supporting 256 to 100,000 test points, it efficiently tests complex wire assemblies, including ...