Refine by
Rock Sample Services
21 services found
by:Princeton Geoscience, Inc. based inPrinceton, NEW JERSEY (USA)
Unique, specialized approach for VOC Loss-controlled Rock Matrix Sampling to support 1) groundwater contaminant diffusion and back-diffusion evaluations for remediation design or Technical Impracticability (TI) proposals, and 2) design of contaminant source excavation plans in settings with consolidated, but rippable bedrock, such as ...
by:DLZ Corporation based inArlington Heights, ILLINOIS (USA)
Our subsurface investigation capabilities include truck, ATV, and barge drilling. Our crews are experienced in soil and rock sampling as well as instrumentation installations. DLZ’s materials laboratory is equipped to perform general index tests, consolidation tests, permeability tests, and shear strength tests on both soil and rock ...
by:American Analytical Services, Inc. based inOsburn, IDAHO (USA)
American Analytical Services, Inc. has a standard operating procedure (SOP) for all aspects of sample drop off, drying and preparation, digestion, instrument analysis, quality control assurance and computerized data reporting.Beginning with the prearranged schedule for sample shipments, AAS will insure a representative will be present to receive ...
by:GeoServ based inDublin , IRELAND
We utilise the steady state method with a custom engineered Divided Bar setup this is the most practical method for testing rock core samples in the laboratory. We also employ the transient heat method with the use of a thermal probe, this test method is applicable for both undisturbed and remolded soil specimens and soft rock ...
by:Geomechanica Inc. based inToronto , ONTARIO (CANADA)
WE PROVIDE LABORATORY TESTING SERVICES WITH PRECISE MEASUREMENTS, PROMPT TURNAROUND TIMES, AND INDUSTRY-LEADING REPORTING AND DIGITAL DATA. The design and analyses of any rock engineering project requires careful mechanical characterization of the host rock. For this purpose, rock cores are drilled on-site and rock ...
by:RESPEC based inRapid City, SOUTH DAKOTA (USA)
The Materials Testing Department is housed in RESPEC's corporate headquarters located in Rapid City, South Dakota. More than one-third of the 30,000-square-foot headquarters building has been designed especially for rock testing, sample handling, and storage. Three laboratories comprise the department and are supported by separate shop facilities for ...
by:Earth Environmental Consultants, Inc. based inRocky Mount, VIRGINIA (USA)
Geotechnical services are required prior to construction of manmade appurtenances to determine if soil conditions can support the foundation of a given structure. A combination of mechanical soil drilling/rock coring to log the soil/bedrock strata at the site to a given depth is combined with actual laboratory testing of specific soil or rock core ...
by:Standard Testing and Engineering Company based inOklahoma, OKLAHOMA (USA)
The Geotechnical Department is fully accredited by the American Association of State Highway and Transportation Officials Accreditation Program (AASHTO-AAP). It also participates in the reference sample testing program of AASHTO. SOIL OR ROCK BORING AND SAMPLING: Bridge and Building Subsurface Investigations, Dams and Waste Lagoons, Material ...
by:Dunelm Geotechnical and Environmental Ltd based inMeadowfield, UNITED KINGDOM
As a RISQS qualified supplier Dunelm can provide PTS qualified staff to undertake the ...
by:A F Howland Associates based inNorwich, UNITED KINGDOM
The rotary drilling technique is normally used for forming a deep observation borehole or for obtaining representative samples of rock which could not be recovered using conventional light cable percussion drilling methods. Powered rotary cutting tools use a cutter head on the end of a shaft, which is driven into the ground as it rotates. The system requires ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Obtaining accurate rock mass strengths requires an understanding of the intact rock and joint properties of each geotechnical unit and the in-situ stress state. To estimate rock mass strengths, Itasca uses the full gamut of engineering approaches, including analytical, empirical, and numerical modeling approaches. ...
Manufactured by:Cascade Drilling based inBothell, WASHINGTON (USA)
Cascade Drilling, L.P. serves the mineral exploration and mine development markets. We operate Sonic, Air Rotary, Top Drive Hammer, Under Reamer and Reverse Circulation, Rock Coring and Mud Rotary drilling. Our customers can expect a consistent, safe and professional service at any ...
Manufactured by:Vista Clara, Inc based inMukilteo, WASHINGTON (USA)
In addition to offering the industry-leading Helios Core & Soil Analyzer for sale or rental, Vista Clara also provides a service to our customers by processing your samples in our laboratory. This service uses Helios systems at our headquarters facility to enable measurement of a wide range of soil and core samples, with diameters up to 4 inches, and with a ...
by:Southern Methodist Univeristy Geothermal Laboratory based inDallas, TEXAS (USA)
Research is the lifeblood of the SMU Geothermal Laboratory. For over 40 years it has provided a rich foundation for the educational experience offered to undergraduates and graduate students alike. The main research focus of the SMU Geothermal Lab is exploration and assessment of existing and potential geothermal ...
by:Frost GeoSciences, Inc. based inHelotes, TEXAS (USA)
Geotechnical engineering is one of the most specialized disciplines in the ever changing world of engineering, technology and construction. Geotechnical engineers are often called upon to integrate theory, state-of-the-art practices and economic trade-offs to develop sound and feasible solutions to subsurface conditions and problems. In order to accomplish this, geotechnical engineers must rely ...
Manufactured by:Stratum Reservoir based inHouston, TEXAS (USA)
Rock and fluid samples provide a direct link to your reservoir or source rock. With decades of skill and expertise spread across the globe, our laboratory services play a pivotal role in reservoir completion strategies. With production success increasingly dependent on what is known about a reservoir, laboratory analyses help quantify the unknown ...
Manufactured by:Cascade Drilling based inBothell, WASHINGTON (USA)
Sonic technology is ideal for both deep and shallow drilling applications where undisturbed core sampling through almost any type of geological formation is required. This powerful technology provides many advantages over other types of drilling techniques. It is a low-impact technology that is safer by minimizing crew tool handling. By rotating and vibrating the rod, core barrel, and casing at ...
by:Geoscience Testing Laboratory based inDubai, UNITED ARAB EMIRATES
Geoscience Testing Laboratory (GTL) provides geotechnical investigation (Surface and Subsurface explorations) services to architects, developers, consultants and contractors. These investigations are performed to guide the consultants and the designers in designing the suitable type of the foundations or to provide general information regarding the subsurface conditions. The surface exploration ...
by:Fugro based inLeidschendam, NETHERLANDS
For nearshore projects, our marine plant and equipment enables Fugro to offer a range of drilling, testing and installation work in a safe and efficient manner. Capable of operating from high water level to water depths of around 40 metres, our jack-up platforms can be mobilised to almost any coastal ...
by:Technology Experts Co. based inRiyadh, SAUDI ARABIA
Technology Experts Labs offer distinguished services in the fields of Radiation and Chemical analysis for different kinds of samples. Our labs are equipped with advanced instruments and devices to perform the required tests from well known International Companies such as: Canberra Industries Inc, (USA) which is specialized in production and manufacture of Nuclear Electronics and Radiation ...