Refine by
Xprt Services In Iowa
353 services found
Premium
Manufactured by:Finn Corporation based inFairfield, OHIO (USA)
All FINN dealers have factory-trained service technicians and can help you keep your equipment in top shape. FINN dealers schedule general maintenance and also carry an inventory of the most common parts to service you needs when a machine needs tune-up or goes ...
by:Trinity Consultants based inDallas, TEXAS (USA)
Many industrial facilities with limited environmental compliance requirements have chosen not to dedicate existing staff or hire new staff to manage environmental compliance activities. Reasons include the substantial cost associated with having dedicated environmental compliance staff and the significant liability associated with assigning environmental compliance—a highly complex and ...
by:Trinity Consultants based inDallas, TEXAS (USA)
Authorized by the Clean Water Act, the National Pollutant Discharge Elimination System (NPDES) program requires that industrial facilities that discharge into the waters of the United States must be permitted. The NPDES has separate permitting programs for process wastewater and storm water. Trinity’s expertise in water discharge permitting includes permit application preparation, water sampling, ...
by:Trinity Consultants based inDallas, TEXAS (USA)
A comprehensive compliance audit can help an organization ensure that all applicable regulations have been properly addressed and to identify and resolve any problematic issues in a timely manner. A compliance audit from Trinity begins with a thorough review of existing facility data including permits, permit applications, plot plans, construction history, emissions calculations, monitoring ...
by:Trinity Consultants based inDallas, TEXAS (USA)
The Risk Management Program (RMP) developed under Section 112(r) of the 1990 Clean Air Act Amendments regulates the storage and/or processing of toxic and flammable substances. It requires affected facilities to develop and submit risk management plans that include a hazard assessment, prevention program, and emergency response program. The RMP is based on a three-tiered (program) approach that ...
by:Trinity Consultants based inDallas, TEXAS (USA)
The accumulation of greenhouse gases (GHGs) in the Earth’s atmosphere, created primarily through fossil fuel combustion, has resulted in global climate change, or global warming. With the entry into force of the Kyoto Protocol and the development of regional GHG emissions trading schemes and voluntary registry programs in the United States, multi-national companies will potentially operate under ...
by:Trinity Consultants based inDallas, TEXAS (USA)
We serve as advocates for our clients with regard to their environmental issues in a number of scenarios including: Identifying applicable regulations, Working with agency personnel to expedite permit approval, Negotiating permit terms to ensure maximal flexibility, Responding to Section 114 information requests, Providing litigation support including expert testimony, Supporting clients during ...
by:Trinity Consultants based inDallas, TEXAS (USA)
Air Dispersion Modeling. Air Quality Permitting. Ambient Air Monitoring. CALPUFF Services. Control Technology Analysis. NESHAP and NSPS Compliance. SSM Solution Tool (SSM-ST). Reporting. Visible Emissions Monitoring System ...
by:Midwest Beef Systems based inHuxley, IOWA (USA)
Henderson Design appears to be a company offering a wide range of construction and facility management services. Their repertoire includes construction management, residential construction, facility maintenance, mining infrastructure projects, and renovation services. They also specialize in niche areas like smart manure systems and cattle handling facilities, indicating an expertise in ...
by:Midwest Beef Systems based inHuxley, IOWA (USA)
In Bed Pack finishers most producers establish a packed area of bedding (corn stalks, saw dust, ...
by:Midwest Beef Systems based inHuxley, IOWA (USA)
Properly designed cattle handling facilities not only make us more efficient, but properly ...
by:Iowa Waste Reduction Center (IWRC) based inCedar Falls, IOWA (USA)
The LaserPaint is one of the products the IWRC has developed for the painting and coatings industry. The spray gun attachment serves as a targeting tool that can be used by any technician at any point in the training or production process. When the spray gun is held at optimal gun-to-part distacne, two laser beams will converge to form a single dot which is projected onto the part being painted. ...
by:Iowa Waste Reduction Center (IWRC) based inCedar Falls, IOWA (USA)
The VirtualPaint training system allows spray facilities to take training to a whole new level. This system allows the user to view and interact with realy spray equipment while simulating the actual application process onto a virtual surface. Using VirtualPaint is similar to training in a spray booth except results are faster and much more comprehensive. These results allow for analysis to ...
Manufactured by:Oxidation Technologies, LLC based inInwood, IOWA (USA)
Ozone is easy to produce, application of ozone is not as simple as it looks. Ensure you are teamed up with an expert in System Integration. Oxidation Technologies specializes in ozone system integration of automated turnkey ozone systems for most any applications. We have a staff of system integrators, engineers, and electrical contractors to help you integrate your ozone system, or any water ...
Manufactured by:Oxidation Technologies, LLC based inInwood, IOWA (USA)
Whatever your need we have the tools, experience, and ability to help you keep your current ozone system running at peak performance. We have experience with most ozone generators manufactured and have the tools necessary to keep you running, or get you back up and running fast. Oxidation Technologies offers comprehensive service contracts for ozone systems and the water treatment industry. ...
Manufactured by:Oxidation Technologies, LLC based inInwood, IOWA (USA)
Oxidation Tech provides on-site service, preventative maintenance, and repairs of Ozone Generators and equipment. Oxidation Tech has the experience, tools, and parts to keep your Ozone Generator and associated equipment running and operational for the long term with minimal ...
Manufactured by:Oxidation Technologies, LLC based inInwood, IOWA (USA)
Oxidation Tech can repair nearly all Industrial Ozone Generators back to original specifications. Many Ozone Generators have been built/integrated by ozone companies that either no longer exist, or offer no repair services. In these cases, we are able to help. We will repair many obsolete Ozone Generators from manufactures that do and do not exist today. Of course, we would also be glad to repair ...
Manufactured by:Oxidation Technologies, LLC based inInwood, IOWA (USA)
All mechanical equipment requires some maintenance at some point. This can be done as preventative maintenance, or as emergency repairs (see above). We believe that a quality preventative maintenance plan is the best method of keeping your equipment working and keeping your overall operation and maintenance (O&M) costs low. Oxidation Tech will customize a preventative maintenance plan for ...
Manufactured by:Oxidation Technologies, LLC based inInwood, IOWA (USA)
All Ozone Sensors will require periodic calibration to ensure your gas measurements are accurate and correct. Different ozone sensor manufacturers will have differing requirements and methods for calibration. This page will serve to provide general calibration information and links to specific calibration procedures from the sensor manufacturers we ...
Manufactured by:Oxidation Technologies, LLC based inInwood, IOWA (USA)
Oxidation Technologies provides ozone exposure testing services for many ...