Refine by
Stack Gas Software
10 software items found
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
APIcom is an easy-to-use yet powerful interface program that connects remotely to TAPI's main line of ambient and stack-gas instrument for system and data control. Link from a remote location to a TAPI instrument via modem, direct RS-232 cable or Ethernet. View the instrument front panel and remotely access all functions that could be accessed when standing in ...
by:Envirosoft Ltd. based inDerbyshire, UNITED KINGDOM
CEMPact has been designed to operate in parallel with our Continuous Emission Monitoring System (CEMS) to provide an estimate of the ground level gas concentrations resulting from the release of exhaust gases from one or more stationary sources at a particular location. CEMPact calculates the mass emission (kg/hr) from the raw emissions data, & then uses the wind speed & ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS Configuration Tools is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The PEMS Analyzer will meet the requirements of Subpart E of Part 75 and/or and the standard under Part 60, PS-16. The ...
by:HAMSAGARS based inMASOODPUR, Vasank Kunj, INDIA
Advance Air, stack gas dispersion (Gaussian dispersion air modeling), fully conforming to “Assessment of Impact of Air Environment: Guidelines for Conducting Air Quality Modeling”, Programme Objective Series: PROBES/70/1997-98, The Program -[Options: any Time EIA. covers Stack Dispersions under Stability Class for data used and ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS Continuous Parametric Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas calculations for pollutants and diluents from various sources. The Continuous Parametric Monitor will meet the requirements of 40 CFR Part 60, Appendix B, PS-17. The Continuous Parametric Monitor is typically used on ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Alternative Emission Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents. Sources monitoring using this product are typically not regulated under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75. The Alternative Emission Monitor product can be ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS PEMS Analyzer is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The PEMS Analyzer will meet the requirements of Subpart E of Part 75 and/or and the standard under Part 60, PS-16. The PEMS ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS Compliance Assurance Monitor is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents. Sources monitoring using this product are typically not regulated under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75. The Compliance Assurance Monitor product can be ...
Manufactured by:Kontram Oy based inVantaa, FINLAND
Through its digitized solutions, the system provides comprehensive visibility into equipment condition, including automated real-time quality control (QAL3) and detailed diagnostic information that supports predictive maintenance. Overall, the CEMS offers an inclusive view of stack measurements, encompassing gas concentration, dust, flow, and temperature data, ...
Manufactured by:4Logit based inDüsseldorf, GERMANY
The Stack v6 Emission Monitoring Platform is engineered for Continuous Emission Monitoring Systems (CEMS), addressing key industry demands such as data handling, monitoring, and reporting. It aligns with European standards like EN14181, incorporating data validation, unit conversion, and calculations. The software transitions smoothly into Industry 4.0 and IIoT environments, meeting modern plant ...