Refine by
Ceramic Testing Equipment & Supplies
31 equipment items found
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
The Valisette ceramic test cell kit is made of 316L stainless steel and is designed for choosing the best crossflow/tangential flow ceramic membrane for your separation ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
The Valisette ceramic test cell kit is made of 316L stainless steel and is designed for choosing the best crossflow/tangential flow ceramic membrane for your separation procedure. The Valisette ceramic test cell unit is 250mm long and works with tubular ceramic membranes. ...
by:Messinger Engineering based inZürich, SWITZERLAND
The CT-1 test system for individual ceramic tubular membranes was developed in response to urgent requirements in the industry. Customers seek a user-friendly, easy-to-understand ceramic membrane system for their initial trials. However, the system must also provide reliable results that can be used for scaling up. It must also be possible to ...
by:Messinger Engineering based inZürich, SWITZERLAND
Laboratory plant for membrane filtration / membrane technology. Benchtop system with a single ceramic tubular membrane. The properties of the ceramic, such as high overflow, high temperatures, pH stability, etc., can be fully utilised thanks to the solid, high-quality design and the installed components. ...
by:Messinger Engineering based inZürich, SWITZERLAND
Our new ceramic membrane test system CM-1, equipped with ceramic membranes and advanced measurement tech, is a key element in researching and engineering ceramic membrane filtration processes. CM-1 precisely controls and maintains constant experimental parameters such as temperature, pressure, flow rate and calculated ...
Manufactured by:Ceramic Instruments s.r.l. based inFiorano Modenese, ITALY
This system makes it possible to observe abraded test specimens in controlled and repeatable light conditions. Light intensity can be adjusted. The instrument is already supplied with the light intensity adjusted according to the standard. The test involves the observation of an abraded test specimen which is placed in the middle of a special surface, together with other 8 unabraded test ...
Manufactured by:Ceramic Instruments s.r.l. based inFiorano Modenese, ITALY
Crazing means hair cracks on the glazed surface of the tile. Resistance to the formation of crazing is determined by subjecting the whole tiles to high pressure steam in an autoclave and then checking the tiles for the presence of crazing after applying a colouring substance to the glazed surface. For large sized tiles the standard envisages cutting. The cut pieces must be as large as possible ...
Manufactured by:Stable Micro Systems Ltd based inGodalming, UNITED KINGDOM
The Ceramscan is a benchtop laser-based scanner that measures the volume, density and dimensional profiles of Ceramic test ...
Manufactured by:Katadyn Products Inc. based inKemptthal, SWITZERLAND
The tried and tested ceramic depth filter Katadyn Pocket removes bacteria, protozoa and other disease-causing agents. The microorganisms cannot pass through the pores of the filter ceramic (0.2 microns) because of their size (greater than 0.2 microns = 0.0002 ...
Manufactured by:Katadyn Products Inc. based inKemptthal, SWITZERLAND
The Katadyn Pocket Water Filter Black Edition. This water filter is beloved by survival specialists. The tried and tested ceramic depth filter Katadyn Pocket Black Edition removes bacteria, protozoa and other disease-causing agents. The microorganisms cannot pass through the pores of the filter ceramic (0.2 microns) because of their size (greater ...
Manufactured by:Multi Lab based inNewcastle upon Tyne, UNITED KINGDOM
Multi-lab Limited are able to supply various types of ceramic tubing both closed one end (COE) and open both ends (OBE), in addition we carry extensive sizes of rods, multi-bore insulators, ceramic plates and a selection of ceramic labware. Our large stock of technical ceramics enable us to ship the same day orders are placed for next day delivery service. Ceramic tubing and ceramic rods are ...
Manufactured by:Jiangsu Victor Instrument Meter Co., LTD based inTaizhou, CHINA
The sensor is far away from the high temperature area, and the temperature compensation system is used to better solve the impact of the environment and temperature on the value. The American gold-plated ceramic sensor makes the test result more excellent and accurate. No training required, simple operation, no need to use tedious steps, one-click start drying ...
Manufactured by:GEA based inHudson, WISCONSIN (USA)
The Model C membrane filtration pilot plant is a flexible unit for testing ceramic membranes on low pressure Membrane Filtration and Ultra Filtration applications. Model C pilot plants can be configured to run higher pressure Ultra Filtration/Nano Filtration applications as well as other tubular membranes (inorganic or ...
Manufactured by:Oxidkeramik J. Cardenas GmbH based inAlbershausen, GERMANY
The high-performance ceramics zirconium oxide CR101 and CR105 from OXIDKERAMIK J. Cardenas GmbH impress with their extraordinary fracture toughness and flexural strength. Added to this are the traditional ceramic properties, such as corrosion resistance, wear resistance and hardness. Compared to metal, zirconium oxide shows only a slight tendency to ...
Manufactured by:Alpha-Purify based inDaventry, UNITED KINGDOM
Alpha-Purify, and our parent company Alpha-Cure, has a long and successful history of working with Original Equipment Manufacturers to supply them with exclusive ultraviolet lamps that are placed in their systems before the sale. Our dedicated research and development department is committed to delivering innovation and quality in partnership with leading UV disinfection system manufacturers ...
Manufactured by:DELO based inWindach, GERMANY
DELO specializes in advanced adhesive solutions specifically tailored for the consumer electronics industry. Their portfolio includes DELO PHOTOBOND, DELO DUALBOND, and DELO KATIOBOND series, renowned for high resistance to humidity and rapid curing capabilities. These adhesives are crucial in enhancing miniaturization, performance, and reliability of electronic devices such as smartphones, ...
Manufactured by:Instron – Division of ITW Ltd. based inBuckinghamshire, UNITED KINGDOM
The 8862 testing systems feature a single screw electromechanical actuator that has been developed for slow speed static, slow strain rate and quasi-dynamic cyclic testing. The systems are completed with high stiffness, precision aligned, two-column load frames to give unparalleled testing performance. The test space is configurable to suit the application requirements. For increased usability, ...
Manufactured by:The Timken Company based inNorth Canton, OHIO (USA)
Timken® miniature bearings, available in both inch and metric sizes, meet virtually all precision requirements including radial retainer, pivot, thrust, high-speed radial, angular contact and full ball ...
Manufactured by:Marvel Medtech Advanced Manufacturing based inCross Plains, WISCONSIN (USA)
One of the key benefits of the AM approach is the capability to produce prototypes of your advanced technical ceramics part designs very quickly without requiring a large investment in specialized tooling. All that is required is a 3D solid model of your design and Marvel Medtech Advanced Manufacturing’s unique expertise in using the XJet NPJ™ system for AM of challenging part ...
Manufactured by:Hegewald & Peschke based inNossen, GERMANY
The HP30S Small Load Hardness Tester was designed for measurements ranging from HV 0.005 to HV 50, offering high precision in hardness testing. Equipped with a digital hardness measurement display, this device allows users to achieve accurate readings. The HP30S can be augmented with various software and image evaluation systems, transforming it into a fully automated hardness ...