Refine by
Applications
Hydrocyclone Separation Equipment & Supplies
58 equipment items found
Manufactured by:Wonderfil Srl based inCESENA (FC), ITALY
TWISTERFIL are hydrocyclonic separators made entirely of stainless steel, designed for the separation and removal of sand, debris and sedimentable solids from the treated ...
Manufactured by:Auto-Klean ltd based inSandiacre, UNITED KINGDOM
The auto-klean Hydro-cyclone seperator is a low cost means of significantly removing solid debris from fluid ...
Manufactured by:Yangzhou Maoyuan Environmental Protection Technology Co., Ltd based inYangzhou City, CHINA
The equipment is commonly used in urban sewage treatment plant at the beginning of the pond, grille, after separation of the sewage larger inorganic particles (generally greater than 0. 5 mm in diameter), most of them adopt air sand, if when the sand sand pump is adopted generally higher requirements for wear and tear. Steel tank is suitable for medium and small flow. It is applied to a single ...
Manufactured by:VAF Filtration Systems - a brand by EVOQUA Water Technologies LLC based inArvada, COLORADO (USA)
VAF Hydrocyclone Separators are effective in removing suspended particles from any flow stream of water where the specific gravtity (density) of the particle(s) is heavier than the water it is in; the more significant the difference in the gravity between the water and the particle, the greater the efficiency of the removal process. ...
Manufactured by:John Deere based inMoline, ILLINOIS (USA)
The John Deere F1000 Hydrocyclone Sand Separator creates a centrifugal action that moves the water around the edge of the body, throwing the sand and heavy materials to the outside of the cyclone. The heavy materials then fall into the underflow chamber to be collected. John Deere provides the proper sized underflow chamber to match the performance of each size ...
Manufactured by:Con-Serv Manufacturing based inLakeland, FLORIDA (USA)
Separate sand and solid matter from water with 90% or better efficiency. Hydro cyclonic, Centrifugal Separation or Particle Separators are all essentially terms used for a filtration method for reduction of total suspended solids in fluid. The principle technology typically uses a conical shaped separator that accelerates the velocity of water maximizing separation of sand and other solid matter ...
Manufactured by:Yamit Filtration based inTnuvot, ISRAEL
Water enters the hydrocyclone via the tangential inlet which creates a spiral flow along the walls of the filter. The centrifugal force separates the waste and sand particles and pushes them towards the walls of the sand separator. Those particles gravitate downwards and into the sedimentation tank, while clean water moves upwards and exits ...
Manufactured by:Polygon-Auto LLC based inZaporozhye, UKRAINE
Application Designed to stabilize and reduce pressure in the water supply network, thereby protecting pipeline and equipment connected to it from high pressure. Operating principle Closed upward flow of water presses on the outer chamber of the hose, brings the hose into hydraulic balance and closes the flow By pressing of the sleeve on the center saddle. While opened water pressure is released ...
Manufactured by:Potential Engineering based inNavi Mumba, INDIA
Hydrocyclone Oil Water Separator is a skid-mounted packaged solution. It is a simple and powerful oil-water separator that does not use consumables or chemicals. In this separator oily water is pumped tangentially into the separator using a high-pressure low-shear pump, it forms a powerful vortex and a huge ...
Manufactured by:UVAR Holland, Part of the UVAR group based inGravendeel, NETHERLANDS
Using hydrocyclones, parts of dirt with a high specific gravity can be filtered out quite effectively. The liquid is admitted tangentially, which results in a centrifugal flow forcing the dirt parts towards the outer side of the filter. Thereupon the dirt is carried downwards to the collecting tank. The water thus freed from the heavy parts arrives at the centre of the spiral and leaves the ...
Premium
Manufactured by:4B France based inVillers Bretonneux, FRANCE
SWECO's hydrocyclone systems offer an economical and efficient solution for removing solid particles from various types of sludge waste, in a range from 4 to 100 microns. They provide finer separation than sieving separators, with significantly higher throughput. ...
Premium
Manufactured by:Enviro-Tech Systems (ETS) based inCovington, LOUISIANA (USA)
ETS Deoiling Hydro-Cyclones balance oil removal efficiency and overall capacity to ensure that separation requirements are met in the most cost effective and space saving way. The liners have been designed so that the Hydro-Cyclone is ultra-slim with a high number of liners to accomodate a given vessel ...
Manufactured by:Rivulis Irrigation, Ltd based inGvat, ISRAEL
The F1000 Hydrocyclone Sand Separator creates a centrifugal action that moves the water around the edge of the body, throwing the sand and heavy materials to the outside of the cyclone. The heavy materials then fall into the underflow chamber to be collected. Rivulis provides the proper sized underflow chamber to match the performance of each size of ...
Manufactured by:V&T Group BV based inNumansdorp, NETHERLANDS
No moving parts, No consumption or blocking of filter elements, Easy to install, No electric or pneumatic control necessary, High efficiency, Low service demand, Simple construction, compact, Low ...
Manufactured by:Georgantis S.A based inThessaloniki, GREECE
Complete Systems GeorgantiS are a complete solution for maximum efficiency in the water cleaning process. The Complete Systems consist of 3 parts: the Hydrocyclone, the Lubrication Head and the Screen or Disk filter. The Hydrocyclone separates the sand from the water; leftover dirt then passes through the valve to the filter where the final ...
Manufactured by:Georgantis S.A based inThessaloniki, GREECE
Complete Systems GeorgantiS are a complete solution for maximum efficiency in the water cleaning process. The Complete Systems consist of 3 parts: the Hydrocyclone, the Lubrication Head and the Screen or Disk filter. Maximum pressure is 10 bar. The Hydrocyclone separates the sand from the water; leftover dirt then passes through the valve to the ...
Manufactured by:Amiad Water Systems Ltd. based in, ISRAEL
The all-polymeric corrosion resistant hydrocyclone sand separators and sand separator batteries are highly efficient and offer maximum energy efficiency and maximum results. Provide excellent mechanical strength and durability for long-term, simple operation and require minimal maintenance. ...
Manufactured by:Wyuna Separation Technology based inBox Hill North, AUSTRALIA
WyunaSep Hydrocyclone separators are one of the best ways to separate two non-mixing liquids. Almost any hydrocarbon oil and most non-hydrocarbon oils such as corn, orange, or other vegetable oils may be separated from water very satisfactorily. The WyunaSep separator uses flow velocity created centrifugal force ...
Manufactured by:PHOENIX Process Equipment Co. based inLouisville, KENTUCKY (USA)
PHOENIX is one of the market leaders for construction aggregate and industrial minerals fines recovery and dewatering systems. The PHOENIX Model HG Separator combines hydrocyclone and dewatering screen technology to effectively recover discarded fine sand from wash plant effluents. The dewatering fines are conveyable, stackable and potentially marketable. The ...
Manufactured by:Demcore based inIstanbul, TURKEY
Demcore Technology provides advanced physical separation technologies designed for efficient material processing and purification across various industries. Our equipment portfolio includes vibrating screens, hydrocyclones, gravity separators, magnetic separators, and flotation cells, each offering high precision in sorting, ...