Refine by
Omnidirectional Sound Source Equipment & Supplies
9 equipment items found
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
The BAS001 Source is designed to generate omni-directional sound fields for making standard compliant measurements including: reverberation time (ISO 3382, ASTM E2235), building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-4 ISO 140-3, ASTM E336, ASTM E90, DIN 55 210). The BAS001 is typically used to saturate a room with a uniform acoustic field. The available high-efficiency ...
Manufactured by:Ntek Srl based inSan Maurizio Canavese (TO), ITALY
The OMNI 5″ omnidirectional sound source is the traditional design solution that isotropically radiates the sound to achieve a consistent sound field at each angle. It allows correct insulation and reverberation time measurements even in large testing ...
Manufactured by:Ntek Srl based inSan Maurizio Canavese (TO), ITALY
The OMNI 4″ HP omnidirectional sound source is the most performant solution to achieve isotropic sound radiation. It allows correct insulation and reverberation time measurements even in large testing ...
Manufactured by:Nihon Onkyo Engineering Co., Ltd. based inSumida-ku, JAPAN
he Noise Vision omnidirectional sound source identification system is designed as a sound source identification and visualization system that does not assume where the noise is coming from. It has been well received by a wide range of customers, leading to its wide use in various ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
400W power amplifier, with pink noise generator, autonomous (powered by its own batteries) and powerful remote control, for use together with the omnidirectional sound source IAG DD5 (IAG DD5 not included on the ...
Manufactured by:Microflown Technologies based inArnhem, NETHERLANDS
The Low Frequency Volume Velocity Source (LVVS) is engineered as an omnidirectional sound source that functions as an acoustic monopole with meticulously controlled source strength. This precision in acoustics is achieved through a mounted particle velocity sensor at the end of the duct, allowing for accurate ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
When we need to perform airborne sound insulation tests between enclosures with high acoustic insulation (above 70 dBA DnTA), we have a serious problem: we can not generate sufficient sound level in the emitter enclosure to measure levels in the receiver enclosure with sufficient and acceptable Signal / Noise ratio. Well, because the insulation is very high or because the background noise in the ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
PC software for measuring a wide range of room acoustical parameters in the field or laboratory according to ISO 3382 (room acoustics), ISO 18233 (analysis methods) and IEC 60268-16 (speech ...
Manufactured by:Nihon Onkyo Engineering Co., Ltd. based inSumida-ku, JAPAN
The planar microphone array which is designed to place microphones optimally is called Optimized Typhoon ARray (OTAR) due to its ...