Refine by
Setpoint Temperature Controller Equipment Supplied In Turkey
13 equipment items found
Manufactured by:Camfil Air Pollution Control (APC) based inJonesboro, ARKANSAS (USA)
The Farr Dust Collector (FDC) Controller's flexible design allows it to be adapted to many dust collector configurations. The Timer Control Module will sequentially pulse up to ten outputs in 'On-Demand' mode, based upon the Pressure Switch closure on the Pressure Differential Meter. If more output capability is needed, up to 980 additional outputs can be controlled with multiple Expander Modules ...
Manufactured by:Akfen Muhendislik & Engineering Co based inBaşakşehir, TURKEY
Portable Crude Oil Plant can be operated in the oil field to produce fuel for diesel engines. It is simple-to-operate, easy-to-start, and easy-to-shut down. Fill your diesel storage tanks and shut the plant down until it’s needed again. Akfen Mini-Refineries are skid mounted, modular crude oil distillation units (CDU) which process from 22.000 Liter of crude oil per Day and are capable of ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The 3508P1 controller provides programmable temperature control using up to 20 segments. Each segment may be defined as a ramp a step or a dwell. The 3508P10 controller has all of the functionality of the 3508P1 with the additional capability of being able to store up to 10 programs with 50 segments per program. The 3508P25 controller has all of the functionality of the 3508P1 with the additional ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The nanodac in recorder only mode comprises a compact, sophisticated and economical paperless chart recorder / DAQ (digital acquisition) recorder. In this mode it must be used in combination with a conventional temperature controller. Up to 14 virtual channels for example performing averaging on the data. Data is continuously logged into either a CSV (comma separated value) or UHH (Eurotherm ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The 2132 furnace controller is mainly used as an over-temperature protection device. All Carbolite Gero furnaces and ovens are designed to 'fail safe' should control of the elements fail. None the less, use of an over-temperature protection device is recommended for situations where there will be unattended operation of the device or simply where protection of valuable loads or the furnace is ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The R38 Basic PID Set-point Controller is used in the Apex Ovens together with a thermocouple ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The CC-T1 touch screen controllers offer programmable control in which 24 segments may be set as ramp, step or dwell and may also be configured to control relays. The CC-T1 series provides a touch screen interface giving intuitive access to a comprehensive menu including: selection and editing of program profiles; scheduling of programs at a ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The tube furnace range GHA (single zone) / GHC (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters. The extended uniform zone in the mid-section of the work tube in the GHC 3-zone furnace is achieved with the use ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The CTF single zone and TZF 3-zone wire wound tube furnaces use a wire element that is wound directly onto a fixed diameter integral ceramic work tube. This simple and economical design of both the CTF and TZF provides a tube furnace that can be used without the need to purchase an additional work tube. However, should vacuum or a modified atmosphere be required, it is necessary to use a separate ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Singer models 106-2SC-PCO and 206-2SC-PCO dual solenoid electronic valves are based on the Singer model 106-PG or 206-PG main valve. The flow into and out of the upper operating chamber is controlled by the two pilot solenoids. The electronic control determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which solenoid is ...
Manufactured by:Carbolite A Verder Company based inHope, UNITED KINGDOM
The tube furnace range GVA (single zone) / GVC (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility with the use of tube adapters the same furnace can be used with a variety of tube diameters. The extended uniform zone in the mid-section of the work tube in the GVC 3-zone furnace is achieved with the use ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The SCP-TP Controller is a simplified process controller designed to complement the Dual Solenoid Control Valve. It offers quick and easy configuration for any single process application as well as on/off applications. The SCP-TP is also equipped to be configured to control the Singer 420DC Motor. Range of application is dependent on the process variable (feedback) transmitter used, which ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The EPC is a single process loop controller designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. Range of application is dependent on the process variable (feedback) transmitter used, which includes (but not limited to) common automatic control valve functions with conventional ...