- Home
- Equipment
- canada ontario
- stack testing
Refine by
Stack Testing Equipment Supplied In Ontario
9 equipment items found
Manufactured by:Scentroid based inStouffville, ONTARIO (CANADA)
The Scentroid Vacuum Chamber is easy to use, portable, and serves as a cost-effective air sampling collection device. Vacuum chambers are air sampling vacuum pump used to pull samples directly without dilution from stack, ambient air, or other sampling devices such as flux chambers or wind ...
Manufactured by:Geomative Co., Ltd. based inNanshan, CHINA
GD-10 is developed based on the latest digital and analog circuitry technique, making it the world leading multi-functional direct current (DC) method instrument. This equipment can be adopted in self-potential (SP), apparent resistivity and induced polarization (IP) surveys. Not only GD-10 supports regular ERT survey configurations, subsurface profiling using both 2D and 3D survey arrays are ...
Manufactured by:Geomative Co., Ltd. based inNanshan, CHINA
GD-20 is a brand new multichannel geo-electrical system, designed with 5 or 12 channels and up to maximum 10 survey points can be measured concurrently for ERT survey, highly enhancing field survey efficiency. GD-20 can be used in SP, ERT and IP surveys. Comparing to single channel instruments, GD-20 boosts ERT survey efficiency up to 2-3 times in average and lowering working duration of field ...
Manufactured by:California Analytical Instruments, Inc. (CAI) based inOrange, CALIFORNIA (USA)
The ZPA analyzer uses NDIR technology to measure CO, C02, CH4, S02, NO and paramagnetic or fuel cell for oxygen. The ZPA NDIR technology is based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, this analyzer produces highly stable and reliable results. A single infrared light beam is modulated by a chopper system and passed through ...
Manufactured by:Teledyne API based inSan Diego, CALIFORNIA (USA)
The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring. The Model T100H provides a simple but precise solution for a broad range of CEM and stack testing ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Sample Interface Panel is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Interface Panel will meet the requirements for sampling during model development and PEMS QA activity. The Sample Interface Panel ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Probe is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Probe will meet the requirements for sampling during model development and PEMS QA activity. The Probe is required to connect the sample line and the ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Sample Line is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Line will meet the requirements for sampling during model development and PEMS QA activity. The Sample Line is required to connect the Probe ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Mobile CEMS is a complete mobile monitoring system on wheels and an integral part of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Mobile CEMS will meet the requirements for use in reference method ...