Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Heat transfer products solutions for the industrial process sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Measurements for Education
- Heat transfer products solutions for the industrial refrigeration sector
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Hose and tube pumps for Food and beverage industry
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Heat transfer products solutions for the commercial HVAC cooling sector
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Pressure sensor for Water supply
- Industrial Waste Shredders for Waste to energy
- Moisture sensors for the construction and concrete industry
- Water sampling for the environmental industry
- Water treatment solutions for swimming pool water treatment
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for agriculture
- Environmental toxicity testing kits for chemicals applications
- Water monitoring for the environmental industry
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for power plants
- Air pollution, emission and process monitoring systems for metals
- Continuous emissions monitoring solutions for chemical industry
- Continuous Emissions Monitoring solutions for flue gas treatment industry
- Pressure Sensor for Ground and surface water
- Air pollution, emission and process monitoring systems for minerals
- Gas flow management solutions for standard applications sector
- Continuous emissions monitoring for glass manufacturing industries
- Water treatment solutions for cooling water treatment
- Industrial Air Pollution Control for the Automotive and Vehicle Engineering
- Industrial Air Pollution Control for the Chemical and Petrochemical Industry
- Industrial Air Pollution Control for the Building Materials, Cement and Lime
- Industrial Air Pollution Control for the Consumer Goods Industry
- Industrial Air Pollution Control for the Electronics and Electrical Industry
- Industrial Air Pollution Control for the Energy and Resources
- Industrial Air Pollution Control for the Food Industry
- Industrial Air Pollution Control for the Pharmaceutical Industry
- Industrial Air Pollution Control for the Metals and Mining
- Industrial Air Pollution Control for the Oil and Gas
- Industrial Air Pollution Control for the Recycling and Waste Management
- Continuous emissions monitoring solutions for waste to energy plants
- Cleanrooms for Specialty Chemicals Sector
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Continuous emissions monitoring for aluminium smelters
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
Xprt Equipment Supplied In Belgium
12,060 equipment items found
Showcase
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Innovative, modular potentiometric OMNIS Titrator for stand-alone operation or as the core of an OMNIS titration system for endpoint titration and equivalence point titration (monotonic/dynamic). Thanks to 3S Liquid Adapter technology, handling chemicals is more secure than ever before. The titrator can be freely configured with measuring modules and cylinder units and can have a rod stirrer ...
Showcase
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube Jupiter systems are predominantly used for cities, gated communities and resorts. BioKube Jupiter systems are delivered fully equipped ready to be installed as a plug and play unit. Each unit contains a treatment zone with aerated filters and a settling zone to remove all ...
Showcase
Manufactured by:Beachcleaners Dorny based inKortrijk, BELGIUM
Our most maneuverable and precise construction. Utmost suitable for small - and difficult - ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY
High quality condensate. Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. Volumes processed 150 – 30,000 ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
Compact FLEXI‑FLOW FF‑109 (up to 50 ln/min) with 8 pre‑installed gases, 22 via FlowSuite. Fast TCS response, flow & temperature measurement, up to 16 bar(g), Bluetooth & USB‑C, compatible with free Bronkhorst ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
The CyBio system for passive cooling of reagents is the automated solution for the safe and comfortable handling of temperature sensitive reagents. This system secures the temperature stability of enzymes, proteins and aqueous solutions in temperature sensitive assays. By means of the passive cooling solution it is possible to maintain the temperature range from 4 °C to 14 °C over a ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Universal use for the following applications: Semi-dry blotting, tank blotting, capillary blotting, gel drying, gel wicking, ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
CyBio TipTrays are designed, manufactured and quality inspected with respect to automation requirements, in turn permitting unattended, precise and highly reproducible sample ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Non Dispersive Infra Red Carbon Monoxide Analyzer for CO measurements in the range 0-50ppm. CO2 monitoring as option. The CO12e analyzer is an Eco-designed, reference air quality monitor, QAL1 certified by the TÜV, US-EPA approved and compliant with ISO 4224. It offers superior metrological performances for CO measurements in the range 0-300 ppm. CO2 monitoring as an option (range: 0-2000 ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
FlowJam T is a sensor that has been specially developed for monitoring the flow of solids that are conveyed through thin pipelines. The sensor can be used for tubes made of electrically non-conductive material, such as plastic or rubber, with outside diameters between 4 and 25 mm. The sensor is mounted around the tube for ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
ElectroDynamic probe electrification measurement technology is unique to ENVEA, and is highly suitable for monitoring industrial applications in which emissions are reduced by bagfilters. This non-optical technique has the performance to meet the accuracy and reliability demands of TUV and MCERTS QAL1 approvals for bagfilter applications as well as provide reliable quantitative and qualitative ...
Premium
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
Mass Flow Meter for gases with integrated display: Direct thermal mass flow measurement. High accuracy. Actual calibrated on Hydrogen H2. Bright, graphical OLED display. Digital or analog output; alarm and counter functions. ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
The TOC/TNb-analyzers of the new multi N/C x300 series use unique technologies and an intuitive software to make your day-to-day laboratory routines easier while delivering results fit for any interlaboratory study. ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN canned motor vacuum blowers are a type of positive displacement blower that comes with a hermetically sealed drive ideal for the conveyance of aggressive and neutral gases. These vacuum systems are useful in industrial high vacuum technology due to their high power, reliability, and ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN vacuum blowers are provided with fluoro rubber (FKM) O-ring seals at the casing flanges. Further important advantages of the blower stage are vacuum tightness and air cooling. Lubrication oil is supplied by splash ...
Premium
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
Low-Flow Vortex Flowmeter for Liquids: Fast response. Analog output (4-20 mA). Compact, light-weight, cost-effective construction. No moving parts; maintenance free. Low pressure drop. IP65 construction. ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
TUV QAL1 and MCERTS Approved, Stand alone or networked system option Particulate CEM providing high quality emission measurement for dust concentrations from industrial processes. Having a 0–7.5 mg/m³ certification range, the QAL 360 sensor can be used at low or high dust levels meeting the tightened minimum emission limit value of 5 mg/m³ for Large Combustion Plant specified in ...