Show results for
Refine by
Applications
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Gas detection analyzers solutions for oil & gas industry
- Gas detection analyzers solutions for chemical & pharmaceutical processes industry
- Gas detection analyzers solutions for solvent based printing industry
- Gas analyzers and monitoring systems for Compliance measurements
- Particle Measurement Instruments for Engine Emissions
- Gas Detection Solutions for monitoring process ovens, dryers & oxidizers
- Gas analyzers and monitoring systems for carbon capture & storage (CCS)
- Gas analyzers and monitoring systems for Raw gas measurements
- Gas analyzers and monitoring systems for aluminum production sector
- Gas analyzers and monitoring systems for fertilizer and nitric acid production sector
- Gas analyzers and monitoring systems for Industrial hygiene
- Acoustic Spectroscopy for Nanotechnology Sector
- Acoustic Spectroscopy for Bio-Sciences and Pharmaceuticals
- Acoustic Spectroscopy for Ceramics Industry
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Lithium-Ion Battery Safety
- Gas detection analyzers solutions for pollution control industry
- Gas detection analyzers solutions for wastewater treatment industry
- Gas monitoring instruments and systems for semiconductor manufacturing
- Process analyzers & instruments for continuous emissions monitoring
- Gas analyzers and monitoring systems for Cement production
- Gas analyzers and monitoring systems for greenhouse gases from ruminants
- Gas analyzers and monitoring systems for fire & material testing
- Particle Measurement Instruments for Non-Road Engine Emissions
- Stack emissions monitoring
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Air Pollution Measurements for Education
- Gas detection analyzers solutions for coil coating industry
- Gas detection analyzers solutions for pulp & paper mills industry
- Gas monitoring instruments and systems for stack testing
- Gas monitoring instruments and systems for stack testing according to EPA test method 320
- Gas analyzers and monitoring systems for waste incineration sector
- Gas monitoring instruments and systems for DeNOx process control
- Gas monitoring instruments and systems for engine emissions measurements
- Gas monitoring instruments and systems for nitric acid process
- Gas monitoring instruments and systems for process NOx measurement
- Gas monitoring instruments and systems for anesthetic gases
- Industrial monitoring solutions for the gas analysers areas
- Fire detection solutions for the power stations sector
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for sulfur pit gas
- Process analyzers & instruments for tail gas treating unit (TGTU)
- Process analyzers & instruments for NOx emissions
- Mercury Analyzers for Mercury Monitoring Toolkit
Sampling Probe Equipment Supplied In Germany
168 equipment items found
Premium
Manufactured by:Umwelttechnik MCZ GmbHÂ Â based inBad Nauheim, GERMANY
Mobile calibration system as transfer standard to determine the correction values for losses along the sampling ...
Premium
Manufactured by:RKI Analytical Instruments GmbHÂ Â based inBad Homburg, GERMANY
"Extension tube 10 m with gas sampling probe": Extension tube 10 m with gas sampling probe. Length standard tube: 135 mm with cotton filter. Connectors: male screw / female quick. Lenght: 10 m; Weight: approx. 1.0 kg. Country of origin: Japan; Customs tariff no. 9027 9080. ...
Premium
Manufactured by:RKI Analytical Instruments GmbHÂ Â based inBad Homburg, GERMANY
"Extension tube 2 m with gas sampling probe": Extension tube 2 m with gas sampling probe. Length standard tube: 135 mm with cotton filter. Connectors: male screw / female quick. Lenght: 2 m; Weight: approx. 0.5 kg. Country of origin: Japan; Customs tariff no. 9027 9080. ...
Manufactured by:AGT-PSG GmbH & Co.KGÂ Â based inErkelenz, GERMANY
Mounting in Ex zone 1 and 2; 90° C Holding Temperature; Corrosion resistant made of stainless steel ...
Manufactured by:CGS Prozessanalytik GmbHÂ Â based inDenkendorf, GERMANY
The usage of the gas sample probe MGS-010_S is the continuous sample take off from dust loaded, high temperature and/or humid processes. This device is applicable for non hazardous areas. The maximum operation temperature is ...
Manufactured by:AGT-PSG GmbH & Co.KGÂ Â based inErkelenz, GERMANY
Largest filter surface on market; Corrosion resistant, made of stainless steel SS316Ti; Comfortable filter change without any tools; Controlled heating to 180°C; No cold spots; Test gas connection as standard; Protective housing for external mounting; Temperature alarm contact; Optionally ...
Manufactured by:M&C TechGroup  based inRatingen, GERMANY
Gas sample probe type SP2000‑H with external ceramic filter type S‑2K150, filter porosity: 2 µm, with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, high‑temperature limiter with reset key responding at +30 °C Tset and low‑temperature alarm with potential‑free status‑alarm contact at ‑30 °C below Tset, ...
Manufactured by:AGT-PSG GmbH & Co.KGÂ Â based inErkelenz, GERMANY
150° C Holding Temperature for Ex-Zone 1 und 2 and Temperature Class 3; Self regulating heating cartridge / No Limiter needed; High IP Protection Class: ...
Manufactured by:AGT-PSG GmbH & Co.KGÂ Â based inErkelenz, GERMANY
180°C Holding Temperature for Ex-Zone 1 und 2 and Temperature Class 3; Self regulating heating cartridge / No Limiter needed; High IP Protection Class: ...
Manufactured by:AGT-PSG GmbH & Co.KGÂ Â based inErkelenz, GERMANY
Largest active filter surface on market; Corrosion resistant, made of stainless steel SS316Ti; Very compact design; Controlled heating to 180°C; No cold spots; Filter change without any tools; Test gas connection as standard; Protective housing for external mounting; Temperature alarm ...
Manufactured by:AGT-PSG GmbH & Co.KGÂ Â based inErkelenz, GERMANY
Largest active filter surface on the market; Corrosion resistant made of stainless steel SS316; Very compact and light weight design; Self-regulated heating to 180°C; Very quick and simple filter change without any tools; Test gas / back purge connection as standard; Low temperature alarm contact; Excess temperature safety switch-off; Extremely robust transport case; Different sampling tube ...
Manufactured by:M&C TechGroup  based inRatingen, GERMANY
Gas sample probe type SP2000 with external ceramic filter type S-2K150, filter porosity: 2 µm, filter element seal and cover seal out of Viton, mounting flange: DN 65 PN 6B with G 3/4" f connection, material: SS 316Ti, Viton, ...
Manufactured by:M&C TechGroup  based inRatingen, GERMANY
Gas sample probe type SP2000-H with external ceramic filter type S-2K150, filter porosity: 2 µm, with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, high-temperature limiter with reset key responding at +30 °C Tset and low-temperature alarm with potential-free status-alarm contact at -30 °C below Tset, ...
Manufactured by:M&C TechGroup  based inRatingen, GERMANY
Gas sample probe with filter housing and mounting flange made of stainless steel. With ceramic filter element, other filter materials are optional. Adaption to nearly all process conditions due to its compact and modular design. Easy installation and low maintenance. Low dead volume. Material of sample-contacting parts: stainless steel, FKM, ...
Manufactured by:Solexperts AG  based inMönchaltorf, SWITZERLAND
With SysMoG GH2ASBUSTERS, depth-specific gas sampling is carried out with a SysMoG® probe and a winch (to a depth of 1500 m, 3000 m is under development). The system consists of a borehole probe with a chamber into which the gases (dissolved in the groundwater) diffuse. When the gas pressure in the probe has stabilised, the ...
Manufactured by:M&C TechGroup  based inRatingen, GERMANY
Gas sample probe type SP2000-H with external ceramic filter type S-2K150, filter porosity: 2 µm with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, overtemperature limiter with reset key responding at +30 °C Tset and undertemperature alarm with potential-free status-alarm contact at -30°C below Tset, ...
Manufactured by:M&C TechGroup  based inRatingen, GERMANY
Gas sample probe type SP2000, with external ceramic filter type S-2K150, filter porosity: 2µm, filter element seal and lid seal out of Viton. mounting flange: DN65PN6B with thread G3/4'i.ion material: SS316, Viton, ceramic. Regulated Heated / Non-Heated Gas Sample Probes with ceramic filter element outside, optional: ...
Manufactured by:M&C TechGroup  based inRatingen, GERMANY
Gas sample probe type SP2000 with external ceramic filter type S-2K150, filter porosity: 2 µm, filter element seal and cover seal out of Viton, mounting flange: DN65PN6B with G 3/4" i connection, material: SS 316Ti, Viton, ceramics With ceramic filter element outside, optional: other filter materials, various possibilities of back purging and calibration ...
Manufactured by:Robecco GmbHÂ Â based inHorhausen, GERMANY
Sample gas probes extract sample gas unadulterated from processes and make it available for further analysis. Unwanted contaminants are already filtered at the sampling point. The maintenance of the probes is easy and possible without great use of special ...
Manufactured by:Robecco GmbHÂ Â based inHorhausen, GERMANY
Sample gas probes extract sample gas unadulterated from processes and make it available for further analysis. Unwanted contaminants are already filtered at the sampling point. The maintenance of the probes is easy and possible without great use of special ...