Show results for
Refine by
Sludge Processing Equipment Supplied In Greece
14 equipment items found
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
The Cambi Thermal Hydrolysis Process improves Anaerobic Digestion by using high temperature and pressure to break down complex substrates before they are introduced to the digestion process. Sludges treated through the Cambi process can also be introduced into a Digester at a much higher concentration. ...
Showcase
Manufactured by:Kurita Water Industries Ltd based inTokyo, JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
Manufactured by:Vitone Eco S.r.l. based inBitonto, ITALY
The Suite of Mr. Sludge is a plug-and-play sludge-dewatering plant which takes just the room of a standard container. Once delivered, you do not have to take it out, since it has been pre-assembled inside the container before leaving our factory and it works from inside. The container is fully-equipped with any device or facility required for a complete ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Self-cleaning crossflow filter for pressurized pipe sampling. Stamoclean CAT411 provides bacteria-free micro filtration of samples from pressure pipes. Its self-cleaning crossflow filter avoids filter blocking, thus increasing your process safety. Thanks to a minimized dead volume, it reflects changes of your process promptly and shortens the response time of your downstream measuring devices. ...
Manufactured by:SUEZ Water Technologies and Solutions based inTrevose, PENNSYLVANIA (USA)
INNODRY is an innovative sludge drying process, proven and ideal for 20'000 - 300'000 PE. The system allows you to treat biosolids with sustainable development criteria. These are energy saving and comfort for the community and the ...
Manufactured by:Salsnes Filter based inNamsos, NORWAY
To save space and money, the enclosed SF systems contain an optional integrated dewatering process. Sludge drops into the collection area from the thickening process at 3 – 8 % DM and is conveyed across the unit by an auger. It can then be fed to a sludge stabilization process (e.g. direct digester feed); ...
Manufactured by:Salsnes Filter based inNamsos, NORWAY
To save space and money, the enclosed SF systems contain an integrated sludge thickening and dewatering process. Typical dewatering results are 20–30% DM. For larger installations, a stand-alone dewatering unit is available (shown below) to dewater sludge from multiple filters. It applies higher pressure to produce even drier ...
Manufactured by:Noardling B.V. based inSneek, NETHERLANDS
Noardling is the world's leading solution provider for wastewater aeration. We have extensive knowledge and experience, and a strong track record in this field. For more than half a century we have designed, manufactured, supplied, installed and maintained fine bubble aeration systems as well as surface aeration systems. These include low speed surface aeration impellers and horizontal brush ...
Manufactured by:Körting Hannover AG based inHannover, GERMANY
Using a liquid as motive medium, liquid jet gas compressors compress gases or vapours with large pressure differences. There is a special ejector design for mixing air or other gases with the motive liquid or for aerating waste water. These ejectors operate at a high gas/liquid mass transfer rate with simultaneous intensive mixing of the liquid ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
ZeeWeed based wastewater and water treatment is a low energy immersed membrane process that consists of Outside-in, hollow-fiber modules immersed directly in the feed-water. The small pore size of the ZeeWeed membranes ensures that no particulate matter will pass into the treated water stream. Thereby the ZeeWeed ultrafiltration membrane system can easily remove particles and suspended solids. ...
Manufactured by:SUEZ Water Technologies and Solutions based inTrevose, PENNSYLVANIA (USA)
An innovative & sustainable solution to increase treatment capacity and improve effluent quality. Upgrading wastewater treatment plants for capacity expansion or nutrient removal is challenged by process complexity, the need for larger tank volumes and increased energy consumption. ...
Manufactured by:Evac E.U.R.L. based inCergy-Pontoise Cedex, FRANCE
The Evac EcoScreen is a mechanical sewage pre-treatment plant. It is a complete standalone screening unit, which can be installed in connection with a sewage treatment plant. A screening unit is recommended for the sewage pre-treatment phase in systems using a custom-designed Evac MBR (membrane bioreactor) to clean wastewater. The Evac EcoScreen unit mechanically separates most of the solid ...
Manufactured by:SUEZ Water Technologies and Solutions based inTrevose, PENNSYLVANIA (USA)
An innovative & sustainable solution to increase treatment capacity and improve effluent quality. Upgrading wastewater treatment plants for capacity expansion or nutrient removal is challenged by process complexity, the need for larger tank volumes and increased energy consumption. ZeeLung is an innovative solution that maximizes the treatment capacity from existing tank volumes while ...
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
Sewage sludge dewatering offers enormous potential savings for the operators of sewage treatment plants. The costs of transport and disposal of the dewatered sewage sludge frequently make up 80% of operating costs. Depending on the capacity of the plant, 1% more dry substance in the dewatered sewage sludge can represent cost savings in the five- to six-digit range. ...