- Home
- papua new guinea
- Equipment
Show results for
Refine by
Xprt Equipment Supplied In Papua New Guinea
102 equipment items found
Manufactured by:Spill Station Australia Pty Ltd. based inWetherill Park, AUSTRALIA
In November 2018 the Australian Spill Control Industry Association (AusSpill) published product quality guidelines for Spill Response Kits. Each Spill Kit in this range is independently tested to BS5979 to ensure it meets the absorbent capacity requirements and adheres to the appearance obligations as stated in the quality guidelines. This kit is suitable to use with oils, fuels, coolant and ...
Manufactured by:Spill Station Australia Pty Ltd. based inWetherill Park, AUSTRALIA
This 120 Litre Hazchem Spill Kit meets the AusSpill product quality guidelines and is tested to BS5979 to ensure genuine absorbent capacity. Suitable to use with most acids, caustics, fuels, oils, solvents and agricultural ...
Manufactured by:Spill Station Australia Pty Ltd. based inWetherill Park, AUSTRALIA
Contain and absorb oil, fuel and solvent spills of up to 240 litres with this compliant oil fuel spill kit. Each spill kit contains spill sorbent and containment equipment as well as PPE and waste disposal bags to ensure that you can effectively respond to hydrocarbon spill. Tested to BS7959 and meets the requirements of AS1940:2017 and the AusSpill product quality ...
Manufactured by:Spill Station Australia Pty Ltd. based inWetherill Park, AUSTRALIA
Designed specifically for small vehicle application, this compact 20 Litre Oil Fuel Spill Kit is fully compliant with the AusSpill quality guidelines Spill Response Kits. The synthetic absorbents in this spill kit will repel water and only absorb hydrocarbons. The absorbents in this spill kit are tested to BS5979 to guarantee performance. Ideal for cars, utes and areas where containers under 20 ...
Manufactured by:Spill Station Australia Pty Ltd. based inWetherill Park, AUSTRALIA
Because it is light weight it is best suited to indoor or low wind areas. It is packed in a re-sealable pail with the patented “Flip Lok” lid. Each pail comes with a free scoop and scraper for spreading and collecting the absorbent. Perfect for kitchens, vehicles, schools, shopping centres, childcare. It is made from an inert mineral and is suitable to use with all substances except ...
Manufactured by:Spill Station Australia Pty Ltd. based inWetherill Park, AUSTRALIA
Contain and minimise the area effected by land based spills of a wide variety of chemicals with Sukerup Hazchem Absorbent Booms. Absorbs acids, caustics, alkalis, oils and fuels. Absorbs up to 20 times its weight. Meets EPA requirements. Colour coded blue for easy recognition. Sold ...
Manufactured by:Spill Station Australia Pty Ltd. based inWetherill Park, AUSTRALIA
These Hazchem Absorbent Blanket Rolls allow for fast coverage over large areas. Just drop them and unroll them. Absorbs acids, caustics, alkalis, oils and fuels. Absorbs up to 20 times its weight. Meets EPA requirements. Colour coded blue for easy ...
Manufactured by:Spill Station Australia Pty Ltd. based inWetherill Park, AUSTRALIA
AusSpill product quality compliant 40L General Purpose Spill Kit are designed to clean up spills of a variety of liquids including paints, oils, fuels, coolant, cutting fluids and agricultural chemicals. Ideal for areas where drums of up to 20L are used and ...
Manufactured by:Spill Station Australia Pty Ltd. based inWetherill Park, AUSTRALIA
Clean up chemical spills of up to 240L with this Compliant Hazchem Spill Kit. This kit complies with AusSpill Quality Guidelines for spill response kits. All sorbents in this spill kit have been independently tested to BS7959 to ensure you can meet your legal ...
Manufactured by:Spill Station Australia Pty Ltd. based inWetherill Park, AUSTRALIA
OA50L Sukerup 100% Organic General Purpose Absorbent is a natural and renewable absorbent manufactured from processed coconut husk and has excellent absorbent characteristics with hydrocarbon and water based liquids. ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 34 modulating float pilot is comprised of a copper float and brass rod assembly which moves vertically. As the level rises, the float lifts and the valve closes. The 34 pilot is optional pilot, available for modulating applications where the float and rod are installed in a still well and / or vertical action is preferred. ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 39 non-modulating float pilot is designed to operate an On-Off float valve. The differential between the level where the valve opens and the level where the valve closes, is adjustable. The standard configuration is for the pilot valve to close on high level and open at a low level. The 39 pilot is used as the standard pilot on all non-modulating F-Type 5, 106 and 206 series ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 43 stainless steel float actuated pilot with non-modulating rotary motion, provides non-modulating On-Off operation of the main valve. It has higher capacity and faster response time than other non-modulating float pilots. The differential between the level where the main valve opens and the level where the main valve closes, is adjustable. The 43 pilot allows for faster operation of the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS-L&H and 206-RPS-L&H anticipating surge relief valves are based on the 106-PG or 206-PG main valve. The valve is mounted in a tee, downstream of the pump check valve(s). It is designed to anticipate surges to avoid the severe water hammer often associated with power failure ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS-RR and 206-RPS-RR surge anticipating relief on rate of rise valves are based on the 106-PG or 206-PG main valve. The valve is installed downstream of the pump check valve(s) and has two pilots, the 81-RP and the 81-RPD. Both pilots sense pressure through a connection to the header pipe. The 81-RP high pressure pilot acts as a standard relief pilot, opening on excessive pressure. The ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The X156 Linear Inductive Valve Position Transmitter electronically indicates the position of the valve and is ideal for applications where precision and accuracy is required. It is mounted directly to the main valve stem and uses an external source of 24VDC power, a 4 to 20mA signal proportional to valve stroke is generated and transmitted. The zero and span are fully adjustable over the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PGM and S106-PGM series control valves are designed for particularly sensitive applications or situations where valves are difficult to access and maintain. The PGM series control valves provide integral back-up control and the ability to signal should the desired function move off limits. It can also provide an independent and very positive ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 206-PGM and S206-PGM control valves are designed for particularly sensitive applications or situations where valves are difficult to access and maintain. The PGM series control valves provide integral back-up control and the ability to signal should the desired function move off limits. It can also provide an independent and very positive ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
For use with grooved Iron Pipe Size (IPS) Pipe Coupling Products, grooved ends allows you to benefit from the simplicity and convenience of grooved end piping and fittings in an automatic control valve. There are a wide range of applications where grooved ends are relevant, but typical applications include municipal water, waste water, fire protection and ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-A-Type 3 and 206-A-Type 3 altitude control valves are based on the 106-PG or 206-PG main valve, and are ideal for maintaining preset maximum level. The Type 3 allows normal forward flow to fill the reservoir to the maximum level, then closes drip-tight at the set-point. The valve opens to permit reverse flow through the valve when the supply pressure drops an adjustable amount below the ...