Refine by
Applications
- Solutions for Real-Time Bulk Material Inventory for Cement
- Solutions for Precision Plastic Resin Inventory for Silos
- Level Sensors Simplify Inventory for Food Processors
- Solutions for Bioenergy
- Solutions for Digitize Agriculture Inventory
- Solutions for Mining Industry
- Heat transfer products solutions for the industrial refrigeration sector
- Environmental monitoring solutions for the groundwater remediation pumping
- Environmental monitoring solutions for the landfill leachate and condensate pumping
- Gas detection for building ventilation control
- Premium Gas Generators and Calibration Solutions for Industry, Emissions and Process Sector
- Diaphragm Metering and Process Pumps for Gas Distribution Network
- Flame Photometer for Measurement of Lithium Sea Water
- Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
- Center Pivot Irrigation Systems for Irrigation
- Process heating for commercial and industrial functions
- Industrial water solutions for packaged equipment sector
- Mixers and Clean Water Technologies for Upstream Chemical and Water Solutions
- Mixers and Clean Water Technologies for Midstream Oil and Gas Processing
- Mixers and Clean Water Technologies for LNG Solutions
- Chemical dewatering for municipal wastewater plants
- Chemical dewatering for paper mills
- Water control for water loss management industry
- Water monitoring for municipal water distribution
- Environmental monitoring solutions for the site remediation industry
- Environmental monitoring solutions for the department of defense and department of energy (DOD-DOE) industry
- Environmental monitoring solutions for the industrial sites industry
- Decanter Centrifuges for Sludge Dewatering Applications
- Decanter Centrifuges for Wastewater Treatment Applications
- Decanter Centrifuges for Food and Beverage Processing Applications
- Decanter Centrifuges for Brewery and Winery Applications
- Decanter Centrifuges for Renewable Energies Applications
- Flame Photometer for Measurement of Na, K and Ca in Plant Extracts
- Flame Photometer for Potassium Extraction from Soil
- Flame Photometer for Recommended Sample Handling Techniques & Considerations
- Flame Photometer for Measurement of Calcium in Serum & Urine
- Flame Photometer for Measurement Of Lithium In Saliva Sector
- Flame Photometer for Measurement of Calcium in DNA and DNP
- Flame Photometer for Measurement of Potassium in Unashed Plant Leaves
- Flame Photometer for Calcium in Unashed Plant Leaves
- Flame Photometer for Measurement of Calcium in Biological Samples
- Flame Photometer for Measurement of Trace Elements in Biodiesel
- Flame Photometer for Units of Concentration
- Flame Photometer for Measurement of Calcium and Potassium in Cereals
- Flame Photometer for Measurement of Potassium and Sodium in Wine
- Flame Photometer for Measurement of Sodium and Potassium in Silicate Rocks
- Flame Photometer for Measurement of Sodium and Potassium in Cheese
- Flame Photometer for Measurement of Potassium and Sodium in Bread
- Flame Photometer for Measurement of Potassium and Sodium in Meat
- Flame Photometer for Measurement of Calcium in Fresh Fruit
- Flame Photometer for Determination of Na and K using Emulsions and Microemulsions for Sample Preparation
- Flame Photometer for Salinity in Processed Foods
- Flame Photometer for Determination of Sodium in Biodiesel by Flame Atomic
- Flame Photometer for Measurement of Low Concentrations of Sodium in Cement
- Flame Photometer for Measurement of Sodium and Potassium in Dried Milk
- Flame Photometer for Measurement of Lithium in Minerals
Level Controller Equipment Supplied In Texas
283 equipment items found
Manufactured by:Beaumont Manufacturing and Distribution (BMD)Â Â based inBeaumont, TEXAS (USA)
BMD's LC10 is a displacer-operated liquid level controller tailored for various vessel configurations. Designed for reliability and durability, it offers field configurability to suit different industrial applications. The LC10's robust design ensures consistent performance in monitoring and controlling liquid levels, enhancing ...
Manufactured by:Pathway Control Products, Inc.  based inNew Caney, TEXAS (USA)
Float-actuated switches for high/low level control and interface control. Working Pressure – 1500 psig to 5000 psig max. Low specific gravity .4 and above. 316 SS wetted components. Hermetically sealed switch cartridge. Single seal application approved. 1 1/2" NPT, 2” NPT or flanged connection. ...
Manufactured by:Pathway Control Products, Inc.  based inNew Caney, TEXAS (USA)
The provided text highlights a comprehensive range of industrial level control and flow indication devices designed for various applications. The E200 Series includes Electric Level Control Switches, available with manual override and extended body options, facilitating precise electric level management. The P120 ...
Manufactured by:Ansh Labs   based inWebster, TEXAS (USA)
Ansh Labs Maternal Serum (MS) Bi-Level Controls are intended for use as quality controls to monitor the accuracy and reproducibility of laboratory testing methods for the determination of AFP, Inhibin A, free beta hCG, Estriol, PAPP-A and Intact hCG in human ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering)Â Â based inHillside, ILLINOIS (USA)
The Omnitrol Model 613 single stage control and the Model 713 two stage, (Dual Actuator), control are top mounted level switches of the adjustable differential type and utilize porcelain as standard displacer material. Porcelain offers several advantages such as low cost and high density for use in applications such as sewage, oils, paints and ...
Manufactured by:Pathway Control Products, Inc.  based inNew Caney, TEXAS (USA)
Float-actuated pneumatic switch for high/low level control or to operate control valves. Working Pressure – 1500 psig to 5000 psig max. Snap acting non-bleed from 0 to full supply. Low specific gravity .5 and above. 316 SS wetted components. No internal seal used thus eliminating the possibility of process fluid leakage. 2” NPT ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering)Â Â based inHillside, ILLINOIS (USA)
The Omnitrol Model 621 single stage controls and the Model 721 two stage controls are "special purpose" top mounted level switches of the fixed differential type. The feature which sets these level devices apart from other top mounted controls is the lead displacers that are suspended on a stainless steel beaded ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering)Â Â based inHillside, ILLINOIS (USA)
The Omnitrol Model 610 single stage control and the Model 710 two stage control are top mounted level switches of the adjustable differential type and utilize graphite as standard displacer material. Graphite, which is an extruded material having no binders to fail, is virtually indestructible making it ideal for corrosive application ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering)Â Â based inHillside, ILLINOIS (USA)
The Omnitrol Model 616 single actuator and the Model 716 double actuator are top mounted level switches. These controls have a standard 2-1/2" NPT connection and are also available with various sized flanges. The displacer is made from stainless steel tube. With a simple field adjustment, the displacer can be positioned to any desired elevation below the ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering)Â Â based inHillside, ILLINOIS (USA)
In an effort to prevent costly and dangerous spills, many major oil companies, pipelines and marketing terminals have established a requirement to check the operation of tank safety switches. To meet this ever demanding need, the Omnitrol Ground Checker Option has been ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering)Â Â based inHillside, ILLINOIS (USA)
The Sonac 110 provides the most reliable overflow alarm or control available. Where liquids to be sensed constantly change physical or electrical properties. The Sonac 110 principle of measurement is used with extremely small vessels or pipes and when little or no intrusion into the process is ...
Manufactured by:Singer, a Mueller Brand  based inKimball, TENNESSEE (USA)
The LCP-TP Level Controller is a single process level controller designed to complement Singer Valve’s Single Solenoid Operated/Override Control Valves and 4-20mA level sensor or High/Low Level Switches. This combination package is ideal for filling any kind of tank that ...
Manufactured by:Advanced Control Technology (ACT)Â Â based inShakopee, MINNESOTA (USA)
Electronic Level Control ACT ELC-3 Low Level detection with time ...
Manufactured by:Advanced Control Technology (ACT)Â Â based inShakopee, MINNESOTA (USA)
Detect conductive liquids with probes set at high and low control points and cycle the output relay between these probes. Pump Up (filling) or Pump Down (emptying independently field ...
Manufactured by:Advanced Control Technology (ACT)Â Â based inShakopee, MINNESOTA (USA)
Time Delay Fillingkeeps tanks full with a single probe. When the tank level drops below the Hi probe the timer starts, after the time delay the output is energized until the level rises to the Hi probe then the output is de-energized. Time delay output compensates for wave ...
Manufactured by:Advanced Control Technology (ACT)Â Â based inShakopee, MINNESOTA (USA)
Single Point Low Levelmonitors non-conductive fluids such as engine oil and brake fluids. Self contained solid state control can either turn on an alarm light or shut off equipment. Short time delay output compensates for waves. Fail safe dual output shows oil ...
Manufactured by:Automation Products Group, Inc. (APG)Â Â based inLogan, UTAH (USA)
The DST series ultrasonic sensors are designed to be used in conjunction with a DCR controller to give you a simplified, stand-alone system. The transmit and receive circuit is built into the sensor and digitally communicates the detected distance to the DCR controller. This allows the sensor to be separated from the DCR controller by up to 2000 feet with no signal loss. With several sensors to ...
Manufactured by:Automation Products Group, Inc. (APG)Â Â based inLogan, UTAH (USA)
The LOE ultrasonic sensor series is designed for remote level mesasurement. Simply plug in your ethernet cable for inexpensive, web-based remote level measurement. They are fully programmable for various applications, giving the user complete control. Each LOE can also serve as a Modbus network controller for up to 10 slave ...
Manufactured by:Singer, a Mueller Brand  based inKimball, TENNESSEE (USA)
The Singer model 106-F-Type 4 and 206-F-Type 4 modulating float valves are based on the 106-PG or 206-PG main valve.They are ideal for balancing the inflow and outflow demand into the reservoir and maintaining level at the designated ...
Manufactured by:Singer, a Mueller Brand  based inKimball, TENNESSEE (USA)
The 106-F-Type 5 and 206-F-Type 5 non-modulating float valves are based on the 106-PG or 206-PG main valve. It is ideal for allowing normal forward flow to fill water reservoirs to a desired high level and where the pilot and valve of the reservoirs are easily ...