- Home
- Equipment
- guam
- applications
- undefined
Refine by
Undefined Equipment Supplied In Guam
107 equipment items found
Manufactured by:Tensar International Corporation. based inAlpharetta, GEORGIA (US) (USA)
GlasPave paving mats are a unique combination of fiberglass mesh embedded into high performance polyester mats. The non-woven matrix structure of GlasPave paving mats allows for an asphalt binder to penetrate and fill voids within the fabric to limit moisture infiltration into a pavement structure. The fiberglass matrix in a GlasPave paving mat coated with an elastomeric polymer provides ...
Manufactured by:Tensar International Corporation. based inAlpharetta, GEORGIA (US) (USA)
The GlasGrid asphalt reinforcement system resists the migration of reflective cracks and increases the fatigue life of overlays. When sandwiched between the leveling course and the surface course in an asphalt overlay, it becomes the hidden strength in the road, turning vertical crack stresses horizontally to effectively dissipate ...
Manufactured by:Tensar International Corporation. based inAlpharetta, GEORGIA (US) (USA)
The Rapid Repair system is a complete repair system for the reinforcement of jointed superstructures, single cracks, and small localized ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 160-RF pilot is a spring and diaphragm operated pilot designed to sense a differential across an external orifice plate. It is a normally open pilot that also has a sensing port is in the spring casing, above the diaphragm and is available in stainless steel. The inner valve is held open by the spring and when the control pressure below the diaphragm exceeds the combined forces ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 81-RP is a remote sensing, high capacity, spring and diaphragm operated, normally closed pilot. The inner valve is held closed by the spring. When the sensed pressure increases above the spring setting, the pilot opens. Model 81-RP pilot is used as the standard pressure relief/sustaining pilot on all 106 and 206 series valves. ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
An altitude pilot valve that is spring and diaphragm operated; it controls the water level in a reservoir by sensing the hydrostatic head. When the hydrostatic head equals the spring force, the pilot connects port “X” (connection to main valve inlet ) to port “K” (connection to main valve bonnet). The main valve closes. When the hydrostatic pressure decreases slightly, the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The fixed restriction is a 303 stainless steel bodied fitting with a stainless steel orifice plug. The fixed restriction controls the flow rate in the pilot system. The orifices are sized to provide the proper control to a select series of valve sizes only. This all stainless steel version replaces all previous versions of the brass body, with stainless steel insert. ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 852-B needle valve is a pilot speed control valve. The body is brass and the stem is stainless steel with a fine thread for controlling flow. O ring packing assures leak proof, trouble free service. 1/4 in / 7.5 mm NPT female to female end connections. ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-DW and 206-DW deep well pump control valves are installed in a tee between the pump discharge and the check valve. The valve is normally open, and, on pump start-up, a pilot solenoid is energized to start closing the valve at a rate governed by the closing speed ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-HC and 206-HC hydraulic check valves are based on the 106-PG or 206-PG main valve. The valve functions as a two position valve - either fully open or fully closed. The HC allows one way flow only. Under normal forward flow, the valve opens as the higher inlet pressure lifts the inner valve assembly and the fluid in the upper chamber is discharged to the lower pressure, downstream side of ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-A-Type 1 and 206-A-Type 1 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 1 allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to allow ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-A-Type 2 and 206-A-Type 2 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 2 valve allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 206-PG series control valve is the preferred choice for pressure reducing valves, flow control valves, relief valves and applications with lower to medium flows. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain water control. Further adapt the valve to provide control for a wide range of functions with Singer ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The SPC pump control panel provides the interface between the pump motor starter and the Singer pump control valve. The SPC ensures that the pump starts and stops without causing line ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The model 106-RD is a spring and diaphragm operated, normally closed pilot designed to allow flow when the inlet pressure exceeds the outlet pressure by a predetermined amount. The model 106-RD is used as a differential control valve on Singer model 106-A-Type 4 altitude control ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PR-48 and 206-PR-48 series pressure reducing valves with low flow by-pass are based on the 106-PG or 206-PG main valve. In addition, a direct acting pressure reducing valve is piped in parallel, using the main valve back port connections. The pilot valve senses the downstream pressure through a connection at the main valve outlet. Under flowing conditions, the pilot reacts to small ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The X107 position indicator stem is designed to provide direct indication of the diaphragm / inner valve position. The indicator stem moves up and down within its protective hexagonal brass housing. Within the housing is clear Pyrex sight glass, which allows viewing from both sides. Singer main control valves are designed with a separate stem cap that makes installation of the X107 safe and ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Oxy-Nitride stem is ideally suited to reclaimed water applications and a wide range of other applications where mineral-build up is a concern. When minerals build-up on stems, it can cause potential maintenance problems and operational malfunctions. The Oxy-Nitride treated stainless steel stem is the perfect solution. Its specialized proprietary aerated salt bath treatment will reduce or ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The X129 limit switch is actuated by the opening and closing of a main valve. The assembly is fully adjustable over the entire valve stroke. Layout variations allow up to four separate switches to be mounted and actuated off the same ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control. Refer to Main Valve Options and Pilots & Accessories to customize the valve to suit specific ...