- Home
- Equipment
- guam
- applications
- undefined
Refine by
Undefined Equipment Supplied In Guam
107 equipment items found
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Singer model 106-F-Type 4 modulating float valves are based on the 106-PG main valve. They are ideal for balancing the inflow and outflow demand into the storage tank and maintaining level at the designated maximum. The valve closes drip-tight at the maximum level and modulates to maintain the tank level. The float pilot is remotely installed at the high level in the storage tank. Pilot ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The EPC is a single process loop controller designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. Range of application is dependent on the process variable (feedback) transmitter used, which includes (but not limited to) common automatic control valve functions with conventional ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Mueller Hydro-Guard® Industrial Flushing System is ideal for keeping water clean, particularly in schools and manufacturing plants that are experiencing reduced and interrupted water usage during the pandemic. The system is designed for small-sized water lines where water quality conditions, water age or excessive temperatures require water to be turned over frequently. Protecting water ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PR-SC and 206-PR-SC pressure reducing valves with solenoid shut-off are based on the 106-PG or 206-PG main valve. The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS and 206-RPS pressure sustaining valves are based on the model 106-PG or 206-PG main valve. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot ...
Manufactured by:Tensar International Corporation. based inAlpharetta, GEORGIA (US) (USA)
Tensar Uniaxial geogrids can carry high tensile loads applied in one direction (along the roll length). Their open aperture structure interlocks with fill material to provide superior load transfer from the soil to the geogrid. Tensar's HDPE geogrids achieve their strength by punching and drawing a homogenous polymer sheet to provide a uniform, consistent product that does not require weaving, ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PR-8702A, which is ULC labelled and listed, is ideal for automatically reducing a higher inlet pressure to a steady lower discharge pressure, regardless of fluctuations in flow or inlet pressure. The valves are based on the 106-PG or A106PG control valves and are available in a complete range of sizes from 1 in / 25 mm to 8 in / 200 mm. In typical pressure reducing applications, the globe ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS-L&H and 206-RPS-L&H anticipating surge relief valves are based on the 106-PG or 206-PG main valve. The valve is mounted in a tee, downstream of the pump check valve(s). It is designed to anticipate surges to avoid the severe water hammer often associated with power failure ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS-RR and 206-RPS-RR surge anticipating relief on rate of rise valves are based on the 106-PG or 206-PG main valve. The valve is installed downstream of the pump check valve(s) and has two pilots, the 81-RP and the 81-RPD. Both pilots sense pressure through a connection to the header pipe. The 81-RP high pressure pilot acts as a standard relief pilot, opening on excessive pressure. The ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The A106-Dynamic Lifter (DL) sewage pressure relief valve is a direct acting spring loaded relief valve. The valve is adjusted to open when the pressure exceeds the set-point, which is approximately 10% above the normal operating pressure. The valve closes drip-tight when pressure falls below the set-point. The DL is connected on a tee off the main line and usually discharges relief flow back to ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PG-BPC or 206-PG-BPC booster pump control valve is installed in-line directly downstream of the pump discharge. The valve is normally closed, and, on pump start-up, a pilot solenoid is energized to slowly open the valve, at a rate governed by the opening speed control. The pipeline flow is gradually ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Model A106-DL-Air is a compact sewage relief valve that is suitable for high pressures up to 200 psi / 13.8 bar, responds very quickly and retains all the features and benefits of the Model A106-DL Spring–Hydraulic version. It is an attractive solution to what may be otherwise a difficult application due to higher pressures or space height limitations. The Model A106-DL-Air-ET retains ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-F-Type 5 and 206-F-Type 5 non-modulating float valves are based on the 106-PG or 206-PG main valve. It is ideal for allowing normal forward flow to fill water reservoirs to a desired high level and where the pilot and valve of the reservoirs are easily ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-A-Type 3 and 206-A-Type 3 altitude control valves are based on the 106-PG or 206-PG main valve, and are ideal for maintaining preset maximum level. The Type 3 allows normal forward flow to fill the reservoir to the maximum level, then closes drip-tight at the set-point. The valve opens to permit reverse flow through the valve when the supply pressure drops an adjustable amount below the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Singer Model 106-SPI-MV is a Single Point Insertion Electromagnetic Flow Meter, installed and calibrated in conjunction with a Singer Valve to provide an accurate flow rate that can be utilized with the metering valve as a stand alone option or built into a 106-2SC-PCO pilot system to provide complete flow-based valve ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 83-RP is a spring and diaphragm operated, normally closed pilot specifically designed for high pressure applications. The inner valve is held closed by the spring. When the control sensed pressure below the diaphragm exceeds the force of the spring, the pilot valve opens. Model 83-RP pilot is used as the standard pressure relief pilot where the operating pressures are excessive, ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 81-RPD is a remote sensing, high capacity, spring and diaphragm operated, normally closed, differential pilot. The inner valve is held closed by the spring. When the pressure under the diaphragm overcomes the combined forces of the spring setting and the pressure above the diaphragm, the pilot opens. The 81-RPD valve is used for remote sensing of a differential pressure for normally closed ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The R-400 is a modulating float pilot with a plastic float, suitable for remote installation on a tank or reservoir. It positions the main valve in proportion to the reservoir level. Standard configuration is for the pilot to close on rising level. Specify “Reverse Acting” for the pilot to open on rising level. The polypropylene float connects to the pilot on a 10 in / ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 34 modulating float pilot is comprised of a copper float and brass rod assembly which moves vertically. As the level rises, the float lifts and the valve closes. The 34 pilot is optional pilot, available for modulating applications where the float and rod are installed in a still well and / or vertical action is preferred. ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 39 non-modulating float pilot is designed to operate an On-Off float valve. The differential between the level where the valve opens and the level where the valve closes, is adjustable. The standard configuration is for the pilot valve to close on high level and open at a low level. The 39 pilot is used as the standard pilot on all non-modulating F-Type 5, 106 and 206 series ...