- Home
- Equipment
- guam
- applications
- undefined
Refine by
Undefined Equipment Supplied In Guam
107 equipment items found
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Singer models 106-SC and 206-SC solenoid control valves are based on the Singer model 106-PG or 206-PG main valve. The solenoid pilot valve provides on-off position operation. The solenoid either admits inlet pressure into the main valve operating chamber or releases pressure from the operating chamber. The pilot system is usually piped to discharge at the valve outlet, but can be piped to ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS and 206-RPS pressure relief valves are based on the 106-PG and 206-PG main valves. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot setting. The valve opens rapidly to relieve damaging overpressure and closes smoothly at an adjustable speed, when the pressure returns below ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RF and 206-RF rate of flow control valves are based on the 106-PG or 206-PG main valves. The valve is ideal for limiting the flow to a pre-determined maximum (via maintaining a continuous pressure differential across an orifice). When the pressure differential is less than the set-point, the valve opens, allowing flow to meet predetermined demand. At the desired maximum set-point, the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The MCP-TP Series is a multiple process loop control panel designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. Range of application is dependent on the feedback (process variables) transmitters used, which is similar to (but not limited to) combination automatic control valve functions with conventional ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The SAP surge anticipator panel provides the interface between a customer supplied, system pressure switch and the Singer surge anticipating control valve. Together they provide protection against destructive pressure surges. The SAP panel energizes the control valve pilot solenoid on an abnormally low pressure reading and/or power failure to pumps. The 12 VDC pilot solenoid is energized to open ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 26 flow stabilizer is a self-cleaning, opening speed control. It is used in conjunction with a fixed restriction orifice that is usually threaded into port 3. The 26 stabilizer allows free flow down to the bonnet (port 1) and restricts flow up from port 1. The 26 stabilizer is used as the standard flow stabilizer (opening speed control) on model 106-PR or 206-PR pressure ...
Manufactured by:Tensar International Corporation. based inAlpharetta, GEORGIA (US) (USA)
With Tensar H-series geogrids, engineers and contractors can reap the benefit of the optimized geometry of our advanced InterAx geogrid at a more economical ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The LCP-TP Level Controller is a single process level controller designed to complement Singer Valve’s Single Solenoid Operated/Override Control Valves and 4-20mA level sensor or High/Low Level Switches. This combination package is ideal for filling any kind of tank that requires filling to a level setpoint, drawing down the tank level to a secondary setpoint and activating the fill cycle ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106 2PR-SC-BT and 206 2PR-SC-BT dual adjustable set point pressure reducing valve using solenoid control is based on the 106-PG or 206-PG valve. The valve is installed with two PR pressure reducing pilots, one set to low pressure, the other to high pressure. The pilot senses the downstream pressure through a connection to the valve outlet. Under flowing conditions, the pilot reacts to small ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Model 35 is a Stainless Steel modulating float pilot with a Stainless Steel fl oat, suitable for remote installation on a tank or reservoir. It positions the main valve in proportion to the Reservoir level. Standard configuration is for the pilot to close on rising level. Specify Reverse Acting for the pilot to open on rising level. The Stainless Steel float connects to the pilot using a 10 in ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The model 625-RPD is a remote sensing, spring and diaphragm operated, normally closed pilot with large diaphragm area for increased sensitivity. The pilot opens when the control pressure exceeds the spring force or the differential established by the spring. The model 625 is used for special applications where a low pressure set point or highly sensitive and responsive pilot is ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
All Singer valves are fitted with Copper tubing as standard. There are optional upgrades to Stainless Steel or Stainless Steel braided hose ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Micrometer needle valves allow for precise speed control. There is virtually infinite flow adjustment in both directions. Standard end connections are female-to-female 1/4 in / 7.5 mm NPT. Standard Materials: Forged brass body, Buna-N seals and stainless steel ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Micrometer flow control valves allow for precise flow control. There is full flow in one direction and adjustable restricted flow in the opposite direction. They are standard on certain models, such as BPC pump control valves and available as an option for other applications. Standard end connections are female-to-female 1/4 in / 6.35 mm ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 167 Proportional Pilot is a direct acting diaphragm operated pressure reducing valve. The valve is held open by the lower diaphragm, opposes the force of the upper diaphragm to close the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Compact design, corrosion resistant construction. Brass body with brass bonnet. Miniature brass 1/8", 1/4" PTF. Brass bonnet equipped with pressure adjusting screw. Indoor applications only. For use on 3" pressure reducing valves & ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
There are two versions of the standard AISI 316 stainless steel strainer with 40 mesh stainless steel screens. The standard strainer J0098B has a 3/8 in / 9.5 mm blowdown/maintenance port for access to the screen and the 3/8 in / 10 mm NPT inlet and outlet connections. The J0097B strainer provides a standard 1/4 in / 6.35 mm sensing / gauge ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Singer Model 106 EPDV-A-10506A Pneumatic/Electric Solenoid control valve is based on the Singer Model 106 PG-UL Deluge main valve. The solenoid pilot provides on-off position operation. The solenoid, using an independent air supply, either admits inlet pressure into the main valve operating chamber from the inlet of the main valve via a high capacity relay valve or releases pressure from the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Singer Model 106 EDV-A-10507A Electric Solenoid control valve is based on the Singer Model 106 PG-UL Deluge main valve. The solenoid pilot provides on-off position operation. The solenoid either admits inlet pressure into the main valve operating chamber from the inlet of the main valve via a high capacity relay valve or releases pressure from the relay valve and therefore the main valve ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-A-Type 2 altitude control valves are based on the 106-PG main valve, and are ideal for maintaining a preset maximum water level. The valve functions as a two-position control valve, either fully open or fully closed. The Type 2 valve allows normal forward flow to fill the storage tank to the maximum level and then closes drip-tight at the set-point. It opens to refill the tank once the ...