Refine by
Segmented Bend Equipment & Supplies
26 equipment items found
Manufactured by:Nordfab Ducting - a Nederman company based inThomasville, NORTH CAROLINA (USA)
Duct Bends allow airflow direction change in a run of duct. Standard QF® Segmented Bends are also available in 90°, 60°, 30° and 15° with Quick-Fit rolled ends. Nordfab Quick-Fit® is a modular system of ductwork that allows easy installation into process ventilation / dust collection ...
Manufactured by:Plastek s.r.l. based inVilladose (RO), ITALY
Execution: segmented by butt welding. Remark: consider a safety factor because of geometry ...
Manufactured by:Plastek s.r.l. based inVilladose (RO), ITALY
Execution: segmented by butt welding. Full pressure ...
Manufactured by:Plastek s.r.l. based inVilladose (RO), ITALY
Execution: segmented by butt welding. Remark: consider a safety factor because of geometry ...
Manufactured by:Paroc Group Oy based inHelsinki, FINLAND
PAROC Hvac Bend AluCoat T is a non-combustible stone wool pipe section bend for thermal and condensation insulation of pipework in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation. Factory produced bends are a very good and fast insulation solution for pipe ...
Manufactured by:Rothenberger Werkzeuge GmbH based inKelkheim, GERMANY
The TUBE BENDER MAXI MSR set includes the manual bending device with different bending segments for bending multilayer composite tubes with a diameter of 14-32 mm. A bending angle display on the bending segment enables the pipe to be bent accurately up to 90°. The open ...
Manufactured by:Rothenberger Werkzeuge GmbH based inKelkheim, GERMANY
The TUBE BENDER MAXI is the manual bending device with different bending segments for bending copper and stainless steel tubes with a diameter of 12-22 mm. A bending angle indicator on the bending segment enables the tube to be bent accurately up to 90°. The open ...
Manufactured by:Gamart S.A. based inJaslo, POLAND
One of the applications of our PE bends are gas networks. GAMART manufactures its seamless bends for gas industry from high-quality PE 100 and PE 100 RC pipes. They are made of material approved for gas transmission that is proven with all the necessary certificates. GAMART bends provide greater safety in the transport of gaseous fuel and are ...
Manufactured by:WIDOS Wilhelm Dommer Sohne GmbH based inDitzingen, GERMANY
The basic machine has two large aluminum basic clamping tools which are swiveling 15° on each side for the fabrication of segmented bends. By screwing in 8 small reduction clamping inserts, a double clamping is obtained at smaller diameters. For fittings with short legs, a small fitting clamping tool is available as an option. Due to the special construction ...
Manufactured by:WIDOS Wilhelm Dommer Sohne GmbH based inDitzingen, GERMANY
For the stationary usage, an additional base frame is available which enables to use the machine as table set. The solid basic machine has two aluminum clamping tools swiveling each for 15° for the fabrication of segmented bends. By using different reducer inserts of a small, large or extra-large type, all clamping options can be realized. For fittings with ...
Manufactured by:Tecnodue Srl based inCervarese S. Croce (PD), ITALY
Main features: Manually operated butt welding machine for pressure pipes (aqueducts, irrigation systems, ...) in PE (polyethylene) and PP (polypropylene). The pivoting clamps allow the construction of segmented bends with different angles (max: 30°) in a wide range of diameters. It stands out for its extreme practicality and manageability, thanks to its low ...
Manufactured by:Tecnodue Srl based inCervarese S. Croce (PD), ITALY
Main features: Manually operated butt welding machine for pressure pipes (aqueducts, irrigation systems, ...) in PE (polyethylene) and PP (polypropylene). The pivoting clamps allow the construction of segmented bends with different angles (max: 30°) in a wide range of diameters. It stands out for its extreme practicality and manageability, thanks to its low ...
Manufactured by:Bausch+Ströbel based inIlshofen, GERMANY
The company specializes in producing high-quality fittings designed for process air systems subject to chemical exposure. The offerings include a wide array of components such as pipes, bends, sleeves, reducers, tees, throttle valves, diffusers, and deflector hoods. These products are engineered to withstand harsh chemical environments, ensuring durability and reliability. The ...
Manufactured by:Avalign Technologies, Inc. based inRosemont, ILLINOIS (USA)
Avalign designs its proprietary Flex Technology to fit a wide variety of segment sizes and bend angles. With capabilities in standard and legacy measurements, you can easily source flexible shafts for a wide range of applications. Our flex shafts adhere to the same high standards of quality and design that you expect from Avalign’s innovative Flex ...
Manufactured by:Gamart S.A. based inJaslo, POLAND
GAMART seamless bends might be also applied to combined and separate sewage systems. Our bends are made of high-quality pipes and they are commonly used in various types of sewage systems. They can be used not only in gravity sewage, but also in pressure and vacuum sewage system. Due to the increased flow efficiency and the specificity of sewage disposal, ...
Manufactured by:Salling Plast AS based inRanum, DENMARK
Building entry bends are available in the following ...
Manufactured by:Fr. Jacob Söhne GmbH & Co. KG based inPorta Westfalica, GERMANY
This results in: energy savings, longer maintenance intervals, shorter downtimes and so lower costs. We achieve this with our innovative manufacturing technology. We produce bends from pressed half shells or pressed segments. Automated production stages, particularly during welding, ensure a uniformly high level of ...
Manufactured by:Röhrenwerk Kupferdreh Carl Hamm GmbH based inEssen, GERMANY
We offer a wide range of seamless and welded fittings from German and international manufacturers which are available from stock. ...
Manufactured by:Fr. Jacob Söhne GmbH & Co. KG based inPorta Westfalica, GERMANY
This results in: energy savings, longer maintenance intervals, shorter downtimes and so lower costs. We achieve this with our innovative manufacturing technology. We produce bends from pressed half shells or pressed segments. Automated production stages, particularly during welding, ensure a uniformly high level of ...
Manufactured by:Fr. Jacob Söhne GmbH & Co. KG based inPorta Westfalica, GERMANY
This results in: energy savings, longer maintenance intervals, shorter downtimes and so lower costs. We achieve this with our innovative manufacturing technology. We produce bends from pressed half shells or pressed segments. Automated production stages, particularly during welding, ensure a uniformly high level of ...