Refine by
Applications
- Microsteam - Turbine Power System for Commercial Applications
- Variable Phase Turbine for Industrial Applications
- Microsteam - Turbine Power System for Institutional Applications
- Turbo Technology for Environmental Sector
- Turbo Technology for Chemical Pharmaceutical Industry
- Turbo Technology for Food Industry Sector
- Process and Separation Technological Solutions for Chemical
- Process and Separation Technological Solutions for Pharmaceutical
- Process and Separation Technological Solutions for Recycling
- Gas Analyzers for Power Plant Application
- Gas Analyzers for Lab Application
- Gas Analyzers for Iron Steel Plant
- Carbon Dioxide (CO2) Emissions Technology for Cement & Lime
- Carbon Dioxide (CO2) Emissions Technology for Iron & Steel
- Carbon Dioxide (CO2) Emissions Technology for Lithium & Critical Minerals
- Carbon Dioxide (CO2) Emissions Technology for Direct Air Capture
- Carbon Dioxide (CO2) Emissions Technology for Water
- Carbon Dioxide (CO2) Emissions Technology for Batteries
- Carbon Dioxide (CO2) Emissions Technology for Agriculture
- Gas analyzers and monitoring systems for waste incineration sector
- Gas monitoring instruments and systems for DeNOx process control
- Gas monitoring instruments and systems for titanium dioxide
Emissions Technology Equipment & Supplies
242 equipment items found
by:Calcin8 Technologies Limited based inWereham, UNITED KINGDOM
CO₂ emissions have been an inherent and unavoidable part of lime production (until now). Over 65% of CO₂ emissions from lime production come from the process of calcination, driving off CO₂ using heat, which can only be abated by carbon ...
Manufactured by:Blackthorn Environmental Ltd based inLondon, UNITED KINGDOM
Most hydrocarbon emissions are residues of the fuel, although they may change their form whilst they are in the combustion chamber. Engines running ‘rich’ produce more hydrocarbon emissions than engines with a ‘lean’ mixture, but even with a lean engine they can be problematic. In terms of perception a sub-group known as aldehydes is quite significant. Aldehydes are used ...
by:Birchtech based inCorsicana, TEXAS (USA)
Our advanced, patented two-part approach to mercury emissions reduction raised the bar across the U.S. sector in achieving mercury capture rates that exceed stringent federally-mandated environmental standards (EPA MATS ruling). Believed to be currently in use by more than 40% of the U.S. coal-fired power plant sector, SEA® Technologies ensures that power ...
by:Bluemethane based inLondon, UNITED KINGDOM
Although the threat has been invisible, stemming methane leaks from reservoirs, rice paddies, and wastewater could be one of the most powerful instruments to quickly slow global warming. Some sources of methane seem unusual, like from water. Methane emissions from water represent 6% of all anthroprogenic methane emissions. Those emissions are comprised from municiple wastewater, industrial ...
Manufactured by:Kawasaki Gas Turbines based inHouston, TEXAS (USA)
Nitrogen oxides (NOx) contained in the exhaust gas are the cause of photochemical smog and acid rain. Kawasaki low emission combustion technologies dramatically reduce NOx in the exhaust gas, significantly reducing the environmental ...
Manufactured by:Kilbride Biotech Group Ltd based inGuildford, UNITED KINGDOM
The process uses microalgae to clean flue gas streams and produce large amounts of biomass and oxygen that can both be utilised as a raw material for many different applications. These flue gas streams can come from any plant burning fossil fuel, and also engines burning biogas generated by anaerobic digestion ...
Manufactured by:Blackthorn Environmental Ltd based inLondon, UNITED KINGDOM
Carbon monoxide (CO) occurs as a result of combustion taking place in an atmosphere where there is a shortage of oxygen. It is a particular problem with engines which run ‘rich’, but even in engines which run ‘lean’ there will be localised areas of the combustion chamber where oxygen is deficient, especially in older design engines. The main reason that carbon monoxide is ...
Manufactured by:Calix Limited based inPymble, AUSTRALIA
Calix’s core platform technology is designed to enable electrification of industries, separation and capture of unavoidable carbon dioxide (CO2) emissions, and efficient industrial processing solutions. Its patented indirect heating approach separates the heat source from the chemical reaction to create multiple potential benefits for metals and mineral ...
Manufactured by:Blackthorn Environmental Ltd based inLondon, UNITED KINGDOM
In an ideal World, we probably wouldn’t burn fossil fuels, but if we continue to do so the best possible outcome would be to get only emissions of water vapour, carbon dioxide and nitrogen. All of these are non-toxic and occur naturally in vast quantities, although unfortunately the first two are known to be ‘greenhouse gases’ and are therefore implicated in climate ...
Manufactured by:Emission Rx Ltd. based inCalgary, ALBERTA (CANADA)
Designed for high-temperature operation (800°C [1475F]) and maximum flow in an economical package, these units enclose the burner flame and reject large amounts of heat to ensure maximum flow throughput at the lowest possible exhaust temperature. These units are best suited to applications including casing gas, tank vapors, landfill gas, biodigester gas, and other problematic, stranded waste ...
Manufactured by:Emission Rx Ltd. based inCalgary, ALBERTA (CANADA)
Geared towards processes requiring low skin temperatures as well as processes that require a minimum operating temperature (Sour gas, BTEX Destruction, etc.). The insulated stack design reduces heat loss and minimizes fuel/assist gas requirements. Due to it's stainless steel construction, these units are well suited to handle acidic or corrosive gas streams as ...
Manufactured by:Dena Nano Ltd based inBarnsley, UNITED KINGDOM
Dena Nano Ltd works from its drive to pay back the environment and uses the phrase “Green from Green” to describe the ability to put our technology into action to aid with reducing harmful ...
Manufactured by:Emission Rx Ltd. based inCalgary, ALBERTA (CANADA)
Our most economical option, these robust units get the job done at a low capital cost. Cost reductions have been considered in every avenue from material and build efficiency, to shipping and installation efficiency. Typical applications include casing gas, tank vapors, instrument vents, landfill gas, and bio-digester gas. These units employ a unique air intake design that actively cools the ...
Manufactured by:Eminox Limited based inGainsborough, UNITED KINGDOM
Eminox exhaust aftertreatment systems (EATS) for PM and NOx reduction are designed with a diesel particulate filter (DPF), urea dosing system (UDS) and selective catalytic reduction (SCR) catalyst. They can reduce particulate matter (PM), nitrogen oxides (NOx, NO2), carbon monoxide (CO) and hydrocarbons (HC) by up to 99%, even at low operating temperatures. ...
Manufactured by:CECO Environmental based inAddison, TEXAS (USA)
Our CCA Combustion Systems brand is a licensed implementer of the Rich Reagent Injection (RRI) technology, jointly developed by Reaction Engineering International (REI) in collaboration with EPRI and DOE. The Rich Reagent Injection is a technology designed to reduce NOx emissions. The RRI process utilizes a reagent (urea) that is injected into ...
Manufactured by:Fujian Longking Co., Ltd based inLongyan City, CHINA
DSC-M dry ultra-low emission control technology and equipment (DSC-M System) has been developed by Longking based on LJD dry CFB-FGD system. It’s a simple yet reliable and cost-effective system with high operational flexibility, and NOx removal can be realized by combination of SNCR/SCR/COA depending on different flue gas sources. It can realize the flue ...
Manufactured by:Xplorobot by Exploration Robotics Technologies Inc. based inHouston, TEXAS (USA)
Exploration Robotics Technologies Inc.'s Laser OGI technology offers a transformative approach to methane emissions detection and quantification. By integrating an array of advanced features such as computer vision and tunable diode laser absorption spectroscopy, the technology ensures precise localization and efficient ...
Manufactured by:Omniscent, Inc. based inSan Jose, CALIFORNIA (USA)
Omniscent Micro GC (Gas Chromatography) based VOC analyzers based on advanced MEMS technology brings high performance real-time autonomous gas leak detection and measurement solutions to our Oil/Gas, Waste Water Management and Petro-Chemical customers. Our analyzers are low power, small and intelligent that monitors, speciates and measures each VOC with ppb resolution. Dual detector AI based ...
Manufactured by:Emvolon Inc based inWoburn, MASSACHUSETTS (USA)
Emvolon leverages advanced platform technology to transform untapped energy sources like landfill gas, biogas, and waste biomass into valuable carbon-negative fuels and chemicals. Their systems effectively convert low-grade stranded energy resources into high-quality syngas and subsequently into green methanol through catalytic processes. This patent-protected technology dramatically reduces ...
by:CarbonQuest based inNew York City, NEW YORK (USA)
CarbonQuest focuses on providing distributed carbon capture technology that significantly reduces CO2 emissions from various types of facilities. The turnkey solutions, deployable in 6-9 months, are designed to address the emission challenges in commercial buildings, campus settings, district heat systems, and industrial processes among others. ...